Transcript Presentation by EEA/ETC - CIRCABC

Agenda item 8b
WISE SoE reporting 2015
state of the play
• When: The reporting will take place from 1st December 2015 until
29 February 2016
• What: 2013 and 2014 data on water quality (in rivers, lakes,
groundwater), emissions to water and water quantity
• Data from previous years (update or additional) as it was indicated as
being available in the quality fact sheets
• Test phase: will be open from 2nd November until 30 November.
Any problems occurring during the testing should be communicated via
[email protected]
1
Olaf Büttner (ETC), Fernanda Néry (EEA)
WG DIS, Brussels, 13/14th October 2015
Water Quality (WISE-4)
• Data dictionary:
http://dd.eionet.europa.eu/datasets/3163
• Structure simplified (16 tables to 5 tables)
• Reporting of disaggregated data
is possible for nutrients and hazardous substances
• Common code list of parameters,
used also in WISE SoE Emissions and WFD
• Spatial unit identifiers (monitoring sites and water bodies)
harmonized with WFD
• Spatial data reported via the WISE spatial reference data flow
2
Olaf Büttner (ETC), Fernanda Néry (EEA)
WG DIS, Brussels, 13/14th October 2015
Water Quantity (WISE-3)
• Data dictionary:
http://dd.eionet.europa.eu/datasets/3223
(final draft, open for comments until 15th of October)
• Implemented as a standard reporting flow via Reportnet.
No longer requires a specific reporting software tool
• Complete revised data model with
– Simplified structure with 7 tables
– Harmonization of parameters with EUROSTAT and WFD
– Significant reduction in the number of parameters:
• 127 parameters removed from the Water Quantity reporting;
• 74 parameters requested (of which 13 newly introduced).
• Spatial data reported via the WISE spatial reference data flow
3
Olaf Büttner (ETC), Fernanda Néry (EEA)
WG DIS, Brussels, 13/14th October 2015
Emissions (WISE-1)
Data dictionary: http://dd.eionet.europa.eu/datasets/3180
• Simplified data model (1 table instead of 4 tables) containing
emissions from point and diffuse sources
• Common code list of substances,
used also in WISE SoE Water Quality and WFD
• WISE SoE source categories harmonised with WFD Pressures
(next slide)
• Spatial data will be reported via the WISE spatial reference data flow
4
Olaf Büttner, Fernanda Nery (EEA)
WG DIS, Brussels, 13./14th October 2015
Emissions to water
WISE SoE source categories aligned with WFD Pressures
WFD Pressure
Comment
1 – Point source of pollution
PT – Point sources
Note that the proper correspondence is PT plus NP5.
1.1 – Point - Urban waste water
U – Point - Urban waste water
Further disaggregation is possible in the WISE SoE Emissions
data flow.
1.2 – Point - Storm overflows
NP5 – Diffuse - Storm overflow emissions
Note that in the WISE SoE Emissions data flow, this source is
reported as a diffuse sources.
1.3 – Point - IED plants
I – Point - Industrial waste water
1.4 – Point - Non IED plants
I – Point - Industrial waste water
1.5 – Point - Contaminated sites or
abandoned industrial sites
1.6 – Point - Waste disposal sites
1.7 – Point - Mine waters
1.8 – Point - Aquaculture
O2 – Point - Waste disposal sites
O3 – Point - Mine waters
Note that under WISE SoE Emissions, these emissions can be
included in the "O – Point - Other" value if the data is not
disaggregated by subcategory.
O4 – Point - Aquaculture
O – Point - Other
2 – Diffuse source of pollution
NP – Diffuse sources
2.1 – Diffuse - Urban run-off
2.2 – Diffuse - Agricultural
2.3 – Diffuse - Forestry
2.4 – Diffuse - Transport
NP4 – Diffuse - Urban run-off
NP1 – Diffuse - Agricultural emissions
NP71 – Diffuse - Forestry emissions
NP72 – Diffuse - Transport emissions
No direct correspondence with WISE SoE Emissions sources. This
type of emissions are reported under "O1 – Point - Contaminated
sites or abandoned industrial sites" (or, if disaggregated values are
not available, under "O – Point - Other").
2.6 – Diffuse - Discharges not connected to
sewerage network
2.8 – Diffuse - Mining
2.7 – Diffuse - Atmospheric deposition
2.9 – Diffuse - Aquaculture
Further disaggregation is possible in the WISE SoE Emissions
data flow.
O1 – Point - Contaminated sites or abandoned industrial sites
1.9 – Point - Other
2.5 – Diffuse - Contaminated sites or
abandoned industrial sites
5
WISE SoE Emissions source
Note that further disaggregation is possible under the WISE SoE
Emissions data flow. A direct matching to WFD 1.9 only exist if
subcategories O1, O2, O3 and O4 are reported, and if only the
remainder sources are reported under the generic category "O –
Point - Other".
Partial correspondence. Note that WFD 2.5 is included under
point sources in the WISE SoE Emissions.
NP3 – Diffuse - Un-connected dwellings emissions
NP73 – Diffuse - Mining emissions
NP2 – Diffuse - Atmospheric deposition
NP74 – Diffuse - Aquaculture emissions
2.10 – Diffuse - Other
NP7 – Diffuse - Other diffuse emissions
No correspondence
NP8 – Diffuse - Background emissions
Partial correspondence: NP7-(NP71+NP72+NP73+NP74)+NP8
WISE - Spatial Data (WISE-5)
http://rod.eionet.europa.eu/obligations/716
• Spatial data must be reported according to WISE GIS Guidance 6.0.1
• Spatial data only have to be reported once
• All spatial references in any of the WISE SoE reporting tables will be
checked against reported spatial data
• Reporting format is GML ( online conversion from shapefile to GML is
available )
• A test phase will be open
• First reporting in WISE SoE is open from 1st December 2015 until
22 March 2016
• In future: reporting of new or update of spatial data (e.g. monitoring
sites) will be possible the whole year
6
Olaf Büttner, Fernanda Nery (EEA)
WG DIS, Brussels, 13./14th October 2015