Transcript Testing Update

Testing Update
• All of the boards from Naprotek have been
retested
– ALCT 288 boards
• All 5 boards working
– ALCT 384 Boards
• 6 working
• 2 broken
– ALCT 672 boards
• 6 working
• 4 broken
Testing Update
• Examples of problems with boards
–
–
–
–
Does not receive 3.3V power
Reference voltage for self test incorrect
Test pulse amplitude too high/low
Program says pulse width too short, but unable
to be seen manually
• Error reported when using both test boards
– Standby test fails for one channel
Testing Update
• Second single cable repaired, working fine now
• To do list
–
–
–
–
Repair broken ALCT boards
Find problem on Ch 20 of second testing board
Update ALCT and Mezz card databases
Continue filling out fellowship application