Transcript Cutler-Hammer

IQ Analyzer
6400/6600 Series
Cutler-Hammer
Power Management Products
High End Metering Capabilities
New IQ Analyzer
Available
May 2000
6400/6600
Series
2
Power Quality Monitoring
• Over 150 metered parameters for
comprehensive diagnostics
• Assess trends, harmonics and
waveforms to prevent process
disruptions and equipment damage
• Isolate and diagnose power quality
problems by analyzing historical
metered data
• Control energy usage and costs via
measurement, on-board data
storage and time-of-use registers
3
IQ Analyzer
Overview






Revenue metering accuracy
 ANSI C12.16 ( 1% )
 ANSI C12.20 ( 0.5% )
 IEC 687 / Canada ( 0.5% )
 Independent certification
Time Of Use Registers
Expanded event storage
UL/CUL/CE
(CSA applied for)
New Display & Faceplate
4 Custom Display Screens
4
IQ Analyzer Key Features
• High-speed waveform capture
– Programmable event triggers
– 2 cycles @ 128 samples/cycle & 8 cycles @ 32
samples/cycle
– 11 channels of voltage & current information are
saved
– Local display of waveform (6600 series only)
• Measures current and voltage through 50th
harmonic
– Display harmonic spectrum on local display (6600
series only)
5
IQ Analyzer Key Features
• CBEMA/ITIC event display via PowerNet
• dv/dt trigger captures subcycle voltage
disturbances (6600 series only)
• Communication flexibility:
– INCOM via IPONI
– Ethernet via EPONI & EPONIF
– RS-232 via RS232PONI
– Modbus via MPONI (Coming Soon!)
6
IQ Analyzer Key Features
• The IQ Analyzer stores 44 different
minimum & maximum values including:
– Current
– Voltage
– Power
– Power Factor
– Frequency
– THD
7
IQ Analyzer Key Features
• On-board event data logging
• Auxiliary I/O capabilities
–
–
–
–
Analog Outputs (3) 0-20mA/4-20mA 1% accuracy
Analog Input (1) 0-20mA/4-20mA 1% accuracy
Digital Inputs (3) optically isolated +30Vdc
Digital Outputs (4) Form C contacts 10A @ 240Vac
8
IQ Analyzer Key Features
• Monitors L-L, L-N, L-G and N-G voltage
– PT ratios from 1:1 to 5,000:1
• Monitors phase, neutral and ground
current
– CT ratios from 5:5 to 10,000:5
– Up to 40A continuous, 300A for 1 second
• Measures % Total Harmonic Distortion
(THD) for current and voltage
9
New Features
• New Trending Capabilities
– 4 Independent trends
– Up to 6 parameters per trend
– Can chose from over 94 parameters
– Total of 90K bytes of storage
• Single parameter every 15 min. for 234 days
– Independent memory allocation for each
trend
– Used with PowerNet for CBEMA/ITIC
curve plotting utility
10
CBEMA Curve Utility
11
New Features
• New Trending Capabilities
– Sampling rate can be set from 8 cycles to 5040
minutes (3 1/2 days)
– Trend 1-3 can save data on a discrete input
– Trend 4 can save data on an event
– If the time period is set for an integer divisor
of 60 the period starts at the next full hour.
12
New Features
• Data Logging Features
– Time & Reason for last 504 Events
– Any meter event is saved
– New Status Change Indicators
•
•
•
•
•
Time of Alarms
Power Up
Resets
Setting Changes
INCOM Connection
13
New Features
• In addition to the data logging of the last
504 events last 10 Waveform Events are
also stored
• The real time clock can be synchronized
to the line to correct for long term errors
(w/o PowerNet)
• Programmable CT Polarity Setting
– Change CT polarity from calibration menu
– Last event under “Power Factor”
14
New Features
• Time Of Use (TOU) Energy Registers
– 32 Schedules
• 8 Weekday
• 8 Saturday
• 8 Sunday
- 8 Holiday
- 8 Seasons
– Each schedule can change 9 times a day
– 4 Different utility rates
– Watt-hours, VAR-hours, VA-hours recorded
15
New Features
• TOU Demands
– Amps, Watts, VARS & VA
16
Improvements
• New Case
– Polycarbonate for higher durability &
temperature
– Rugged outer edge
– Reset button changed from red to blue
• New Display
– Reverse mode,
LED backlit LCD
– Yellow on black
– High reliability
17
Improvements
• Custom Screen Enhancements
– Allows programming of 7 parameters
per screen
– Now 4 custom screens
– List of programmable items extended
• Clock
• Min/Max Values since last trend
• Magnitude THD (V and A)
– Displays each screen for 5 seconds
18
New IQ Analyzer
• Old IQA6000/6200 catalog numbers
replaced with new 6400/6600 series
– IQA6410
– IQA6420
– IQA6430
– IQA6610
– IQA6620
– IQA6630
-
Separate Source PS
DC PS
Self Powered Three Phase PS
Separate Source PS w/waveform
DC PS w/waveform
Three Phase PS w/waveform
19
Support Material
• Instruction book changes to TD 17530B
• New Technical Data available
– TD.17.02A.T.E
• New Color Brochure available
– B.17C.01.S.E
20
Literature/Sales Tools/Getting Help
www.ch.cutler-hammer.com/pmp
Power Management Applications Support
800.809.2772
Power Management Sales Managers
CHESS Power Automation Specialists
Product Guide - PG.17.01A.T.E
21
Wrap UP
• Product Feedback
• PMPC Support
• Questions & Answers
•Thank You!
22