Transcript PowerPoint 演示文稿 - Hal Technology

Pocket Multi-channel Signal Analyzer

IIntroduction

Key Features

Applications

Key Specifications

Hardware Connections
Introduction
The Pocket Multi-Channel Signal Analyzer (PMCSA )is
aunique test and measurement instrument .It is designed for
applications in electronic,nuclear and optical spectral signal
analyzing.

PMCSA is most recently developed by HAL Technology
based on the digital signal processing (DSP)technology. A
variety of analog input signals can be analyzed fast and
accurately. The software shipped with the unit can display
the distributions of input signal amplitudes on PC through
the high speed USB interface. The data can be acquired in
real time and easily stored and printed at the user’s choice.
No additional power supply to the unit is needed.

The PMCSA is especially useful for analysis of pulse
height and distribution .It can be used with a variety of
sensors or transducers. HAL Technology would welcome the
customer’s design input to enhance the analyzing
capabilities.

Features
• Variable Channel up to 16000
• Fast Response
• USB interface and real time data acquisitions
• Time-domain Signal Display and Analysis
• No power supply needed
• Free Software and up-gradable
Applications
• Pulse Height Analysis of Sensors
• Signal Analysis of Sensors
• Multi-Channel Analysis
Specifications
Hardware Connections
USB Interface
Input Select Switch Input BNC Connector
Software

Introduction

GUI Samples

Key Features

Set up
Simple Operation Instructions for MCSA 2.0
The multi-channel signal analyzer software, MCSA
Version 2.0, is used together with a MCSA-16000 Pocket
Multi-Channel Signal Analyzer purchased. It is compatible
with Window operation systems 98/2000/ME/NT/XP. The
software has a built-in help and is easy to install and
upgradeable. The PMSA Version 2.0 is specially designed for
analysis of pulse height and distribution (PHA).
The software is easy to use. The users can normally find
the function name of each button/icon by placing the mouse
pointed at the center of buttons. Both Information Window
and Graphics Window provide all the detailed information for
the users in direct view. The special feature on Waveform
Mode allows users view the time-domain input signal in real
time without need of an extra oscilloscope.
MCSA GUI
Tool Bar
Open files in *.cjm and *.cjt format.
Save data into the file in *.cjm or *.cjt format
Set up the acquisition parameters.
Print the current histogram.
Help on use of PMSA.
Start sampling for either waveform or histogram.
Stop sampling.
Clear the current displayed histogram.
Switch to Histogram mode.
Switch to Waveform mode.
Calibrate the voltage response of the PMSA.
Acquisition Setting
Data is refreshed in real time
No data is refreshed in duration acquisition until
counting time ended
Counting time applies both real-time and duration acquisition.
Instrument Setting
Input Signal Maximum Amplitude.
It must be consistent with the
hardware selection.
By selecting Absolute Peak Mode,
only falling edge of a pulse reaching
the specified baseline value will be
counting as a true pulse count.
Useful for multipoint smoothing
of a noisy pulse envelope
By selecting the First-peak mode,
a pulse will be counted whenever
its falling edge lower the specified
value from its peak.
Histogram
Waveform
The actual waveform can be measured using mouse move over
Info Window for Histogram
Click Data，Switch to the original data information on channel vs. count
General Info window displays most interested
information
Data can be saved into a file in ASCII format
Thanks for Your Business!
Address: 625 E Carroll Avenue
Glendora, CA 91741
Phone:
(510)579-8540
Fax:
(626)963-7302
URL：http://www.haltechnologies.com
E-mail：[email protected]