Transcript Used Eagle LXS / 84 louver and perforated tube high speed

Used Eagle LXS / 84
louver and perforated tube
high speed production machine.
May 2007
Specification explanation and
information.
Offered by Foxx Spectrum Ltd.
What does the machine do?
• The machine takes either
perforated or louvered
steel or stainless steel
sheets, it forms them
around a mandrel then
mechanically lock-seams
them either internally or
externally.
Products produced
Mechanically lockseamed tubes.
Tube sizes.
• Max length:- 600 mm single feed.
• Max length:- 300 mm single feed.
{feed in two sheets at a time}
• Max Diameter:- 70 mm
• Tube wall :- thickness 0.5 / 1 mm
Output
Feed single sheet.
A 600 mm long tube can
be produced every 5
seconds.
On 3 shifts, this means
around, 4,320,000 per
year!
• Double sheet feed
A 300 mm long tube can
be produced every 2.5
seconds.
On 3 shifts this means
approximately
8.640,00 per year.
Feed table
• The feed table can be set to work with one
sheet as a time. {for tubes over 300 mm in
length.}
• The feed table can be split in two for sheets
less than 300 mm in length, so two tubes
can be produced per cycle.
Simple operation description.
The EAGLE LXS/.L-84 is a compact, self-contained machine designed for
forming and lock-seaming louvered or perforated sheets. The motor drive and hydraulic
components are mounted on top of the hydraulic oil reservoir as part
of the base and are easily accessible.
One or two (depending on length of tube) pre-notched and louvered/perforated
sheets are placed into the sheet feed and are fed into the work area
up. against an adjustable back stop. A hinged roller die assembly
rises to grip the sheet(s) between the pressure bar and the mandrel.
The rollers continue rolling the sheet(s) around the mandrel forming
a "U" section.
An overhead, traveling lock-seaming carriage advances, forming and
locking the seam in one operation.
As the carriage returns, the
sheet(s) are automatically stripped from the mandrel.
Tool change is quick and easy’ requiring only a mandrel change for
various tube diameters and a few simple adjustments.
Tool Change mandrel
Tool adjustment carriage
Other information.
•
•
•
•
•
•
•
Age 20 years.
Condition. Good in full running order.
Racine hydraulics – Allen Bradley electrics.
Voltage 230 3ph. 60 z.
Control voltage 115
Power :- 15 HP / 11.25 KW.
Floor size:- 42700 mm by 1220 wide.
Price and terms
• New price is approximately 160,000
USD{92,000 British pounds}
• Offer price is 29,000 British pounds.
• Offered clean functioning and running
loaded on truck Wirral UK.
• Machine is offered without tooling.
• Tooling can be quoted, used or new.