Transcript Chapter 4

Chapter 4 Lecture
Chapter 4:
Newton's Laws
of Motion
© 2016 Pearson Education, Inc.
Physics 201 Fall 2016
S1 Times:
Sunday: 7:15-8:15 MPHY 213
Monday: 7:15-8:15 MPHY 213
Wednesday: 7:15-8:15 MPHY 213
Lecturer: Zach Armbruster
Disability Service Students
If you have students taking the
exam with disability services it
will be your responsibility to send
exams for them to disability
services.
Goals for Chapter 4
• To understand force – either directly or as the
net force of multiple components.
• To study and apply Newton's first law.
• To study and apply the concept of mass and
acceleration as components of Newton's second
law.
• To differentiate between mass and weight.
• To study and apply Newton's third law & identify
two forces and identify action-reaction pairs.
• To draw a free-body diagram representing the
forces acting on an object.
© 2016 Pearson Education, Inc.
Dynamics, a New Frontier
• Stated previously, the onset of physics
separates into two distinct parts:
• statics
• dynamics
• So, if something is going to be dynamic, what
causes it to be so?
• A force is the cause. It could be either:
• pushing
• pulling
© 2016 Pearson Education, Inc.
Mass and Weight
• Mass is a measure of "how
much material do I have?"
• Weight is "how hard do I
push down on the floor?”
• Weight of an object with
mass m must have a
magnitude w equal to the
mass times the magnitude
of acceleration due to
gravity:
© 2016 Pearson Education, Inc.
Measurement of Mass
• Since gravity is
constant, we can
compare forces to
measure unknown
masses.
© 2016 Pearson Education, Inc.
Types of Force Illustrated I
© 2016 Pearson Education, Inc.
Types of Force II
• Single or net
• Contact force
• Normal force
• Frictional force
• Tension
• Weight
© 2016 Pearson Education, Inc.
Dynamics, Newton’s Laws
First Law: Every body stays in its state of motion( rest or
uniform speed) unless acted on by a non zero net force.
Second Law: The acceleration is directly proportional to the
net force and inversely proportional to the mass:
F
a
Third Law: Action is equal to reaction.
m
Newton's First Law
• "Every object continues either at rest or at a
constant speed in a straight line…."
• What this common statement of the first law often
leaves out is the final phrase "…unless it is forced
to change its motion by forces acting on it."
• In one word, we say "inertia."
© 2016 Pearson Education, Inc.
We Determine Effect with the Net Force –
• The top puck responds to a nonzero net force (resultant force) and
accelerates.
• The bottom puck responds to two
forces whose vector sum is zero:
• The bottom puck is in equilibrium,
and does NOT accelerate.
© 2016 Pearson Education, Inc.
Forces are Inertial and Non-inertial
• The label depends on the
position of the object and
its observer.
• A frame of reference in
which Newton's first law is
valid is called an inertial
frame of reference.
© 2016 Pearson Education, Inc.
Mass and Newton's Second Law
•
• Object's acceleration
is in same direction
as the net force acting
on it.
• We can examine the
effects of changes to
each component.
© 2016 Pearson Education, Inc.
Mass and Newton's Second Law II
• Let's examine some
situations with more
than one mass.
• In each case we have
Newton's second law
of motion:
• Force in N, mass in
kg, and acceleration
in m/s2.
1 N = (1 kg)(1 m/s2)
© 2016 Pearson Education, Inc.
Newton's Third Law
• "For every action,
there is an equal and
opposite reaction."
• Rifle recoil is a
wonderful example.
© 2016 Pearson Education, Inc.
Newton’s laws and concept of mass
Famous equation:
𝐸 = 𝑚𝑐 2 (Einstein)
𝐹 = 𝑚 𝑎 (Newton)
𝑁 = 𝑘𝑔
𝑚
𝑠2
1N=1kg*1m/s2 (mkgs-systems)
Force=1dyn
(cmgs-systems)
1𝑘𝑔 ∗ 103 𝑔 ∗ 1𝑚 ∗ 102 𝑐𝑚
𝑐𝑚
5
1𝑁 =
=
10
𝑔
= 105 𝑑𝑦𝑛
2
2
1𝑘𝑔 ∗ 𝑠 ∗ 1𝑚
𝑠
Newton’s Laws
1st law: Without a force the state of motion is the same
𝐹
𝑚
2nd law:
𝐹 ∝ 𝑎, and 𝑎 =
3rd law:
Action = Reaction
Force to stop a car
What force is required to bring a 1500kg car to rest to rest from a speed of
100 km/h within 55m?
Conversion of units;
𝐹 = 𝑚𝑎
So, 𝑎 =
𝑘𝑚
100
ℎ
2
and 𝑣
𝑣 2 −𝑣𝑜2
2(𝑥−𝑥𝑜 )
=
103 𝑚
1ℎ
𝑚
∗
∗
=
28
1𝑘𝑚
3.6𝑥103 𝑠
𝑠
= 𝑣𝑜2 + 2𝑎(𝑥 − 𝑥𝑜 )
0−282
2∗55
= −7.1
𝑚
𝑠2
𝐹 = 1500 −7.1 = −1.1𝑥104 𝑁
A Force May Be Resolved Into Components
• The x- and y-coordinate axes
don't have to be vertical and
horizontal.
© 2016 Pearson Education, Inc.
Adding force vectors
pulling a sled, Michelangelo’s assistant
The two forces in an action-reaction pair always act on
different objects
For forward motion: FAG> FAS FSA > FSG
weight = 𝑚𝑔
When drawing force diagrams consider only forces acting on the same
object
For forward motion:
𝐹𝑆𝐴 > 𝐹𝑆𝐺
𝐹𝐴𝐺 > 𝐹𝐴𝑆
Weight, normal force and a box
Normal force = 𝐹𝑁 and mystery box
𝐹 = 𝑚𝑔 and (mass) 𝑚 = 10 𝑘𝑔
a)
𝐹 = 𝐹𝑁 − 𝑚𝑔 = 𝑚𝑎 and 𝑎 = 0
𝐹𝑁 − 𝑚𝑔 = 0 So, 𝐹𝑁 = 𝑚𝑔 (normal force)
b)
𝐹𝑁 − 𝑚𝑔 − 40𝑁 = 0; 𝐹𝑁 = 98𝑁 + 40𝑁 = 138𝑁
c)
𝐹𝑁 − 𝑚𝑔 + 40𝑁 = 0; 𝐹𝑁 = 98𝑁 − 40𝑁 = 58𝑁
d)
𝐹𝑦 = 𝐹𝑃 − 𝑚𝑔 = 100𝑁 − 98𝑁 = 2𝑁 = 𝑚𝑎𝑦
𝑎𝑦 =
𝐹𝑦
𝑚
=
2𝑁
10𝑘𝑔
= 0.2
𝑚
𝑠2
Clicker question
You use a cord and pulley to raise boxes up to a
loft, moving each box at a constant speed. You
raise the first box slowly. If you raise the second
box more quickly, what is true about the force
exerted by the cord on the box while the box is
moving upward?
a)
b)
c)
d)
The cord exerts more force on the faster-moving box.
The cord exerts the same force on both boxes.
The cord exerts less force on the faster-moving box.
The cord exerts less force on the slower-moving box.
© 2016 Pearson Education, Inc.
Use Free Body Diagrams In Any Situation
• Find the object of the focus of your study, and
collect all forces acting upon it.
© 2016 Pearson Education, Inc.
Forces Transmit Themselves as Tension –
Example 4.9
• We can solve for several outcomes using the
elevator as our example.
© 2016 Pearson Education, Inc.
Unwanted weight loss(descending)
 F  ma
Stepping on a scale in an elevator and push “up”. Your normal weight is 625N.
Your weight going up
a) Work out your mass
𝑊
𝑚=
= 63.8 𝑘𝑔
𝑔
𝑚
𝑎 = +2.5 2
𝑠
What does the scale read?
𝐹𝑦 = 𝑚𝑎𝑦 = 𝑁 − 𝑊 = 𝑚𝑎
Scale reading;
N = 𝑚𝑎 + 𝑊 = 63.8 ∗ 2.5 + 63.8 ∗ 9.8 = 784𝑁
Apparent mass =
784
9.8
= 80 𝑘𝑔
Tension in the string
b) What is the tension in a string holding a 3.85kg
package?
𝐹𝑦 = 𝑚𝑎𝑦 = 𝑇 − 𝑊
T = 𝑚𝑎 + 𝑊 = 3.85 ∗ 2.5 + 3.85 ∗ 9.8 = 47.4𝑁
Weight loss in a descending elevator
𝐹 = 𝑚𝑎 and 𝑚 = 65 𝑘𝑔 with 𝑎 = 0.2 ∗ 𝑔 (elevator)
𝐹𝑁 =normal force indicated by scale
𝐹𝑁 − 𝑚𝑔 = 𝑚(−𝑎)  𝐹𝑁 = 𝑚𝑔 − 0.2 ∗ 𝑔 ∗ 𝑚 = 𝑚0.8𝑔 = 509.6𝑁 (apparent weight)
𝐹𝑁 = 𝑚𝑔 = 65 𝑘𝑔 ∗ 9.8
𝑚=
0.8∗637
9.8
𝑚
𝑠2
= 637 𝑁 (real weight)
= 52 𝑘𝑔 (apparent mass)
Forces and Free Body Diagrams I
• The vertical forces
are in equilibrium
so there is no
vertical motion.
• But there is a net
force along the
horizontal direction,
and thus acceleration.
© 2016 Pearson Education, Inc.
Forces and Free Body Diagrams II ketchup-slide
• Like the previous example, we account for the forces
and draw a free body diagram.
• Again, in this case, the net horizontal force is
unbalanced.
• In this case, the net horizontal force opposes the motion
and the bottle slows down (decelerates) until it stops.
2
𝜃𝑥2 − 𝑣0𝑥
= 2𝑎𝑥 𝑥 − 𝑥0
𝑚 2
0 − 2.8
= 2𝑎𝑥 1.0 𝑚 − 0
𝑠
𝑚
𝑎𝑥 = −3.9 2
𝑠
Σ𝐹𝑥 = −𝑓 = 𝑚𝑎𝑥
𝑚
−𝑓 = 0.20 𝑘𝑔 −3.9 2
𝑠
𝑚
= −0.78 2 = −0.78 𝑁
𝑠
We Can Solve for Dynamic Information –
Example 4.4
• Knowing force and
mass, we can sketch
a free body diagram
and label it with our
information.
• We can solve for
acceleration.
© 2016 Pearson Education, Inc.
Superposition of Forces: Resultant and
Components
• An example of superposition
of forces:
• In general, the resultant, or vector sum of forces, is:
© 2016 Pearson Education, Inc.
Pulling a box
Note: FN is less than mg
Pulling the box
𝐹 = 𝑚𝑎 and 𝑚 = 10 𝑘𝑔
𝐹𝑝𝑥 = 40 ∗ 𝑐𝑜𝑠30 = 34.6𝑁
𝐹𝑝𝑦 = 40 ∗ 𝑠𝑖𝑛30 = 20.0𝑁
Horizontal
𝐹𝑝𝑥
34.6
𝑚
𝐹𝑝𝑥 = 𝑚𝑎𝑥  𝑎𝑥 =
=
= 3.46 2
𝑚
10
𝑠
box accelerates horizontally
Vertical
𝐹𝑦 = 𝑚𝑎𝑦
 𝑎𝑦 = 0 box does not accelerate vertically
and 𝐹𝑁 − 𝑚𝑔 + 𝐹𝑝𝑦 = 𝑚𝑎𝑦
𝐹𝑁 − 98𝑁 + 20𝑁 = 0 = 78𝑁
Box sliding down
Fx  max  mg sin   ma  a  g sin 
Fy  ma y  FN  mg cos  0  FN  mg cos
Clicker question
In which case does the rope break first
a) He climbs with a constant rate
b)He just hangs in the rope
c)He accelerates upward with constant a
d) He decelerates downward with the same
constant a
A gymnast climbs a rope
In which case does the rope break first? Need to see when rope tension is
largest.
Consider the following cases;
a) He climbs with a constant rate
𝐹 = 𝑚𝑎 and 𝑎 = 0 So, 𝑇 = 𝑚𝑔
+a
b) He just hangs on the rope
𝐹 = 𝑇 − 𝑚𝑔 = 0; So, 𝑇 = 𝑚𝑔
c) He climbs up with constant acceleration
𝐹 = 𝑇 − 𝑚𝑔 = 𝑚𝑎; So, 𝑇 = 𝑚(𝑔 + 𝑎)
d) He slides downward with constant acceleration
𝐹 = 𝑇 − 𝑚𝑔 = −𝑚𝑎; So, 𝑇 = 𝑚(𝑔 − 𝑎)
-a
Getting the car out of the mud
Getting the car out of the sand. All you need is a rope and Newton’s second law;
𝐹 = 𝑚𝑎 and
𝐹𝑥 = −𝐹𝑇1 cos 𝜃 + 𝐹𝑇2 cos 𝜃 and 𝐹𝑇1 = 𝐹𝑇2
𝐹𝑦 = 𝐹𝑃 − 2𝐹𝑇 sin 𝜃 = 𝑚𝑎 = 0 (At the break or loose point)
𝐹
𝐹𝑇 = 2 sin𝑃 𝜃 and 𝐹𝑃 = 300𝑁, 𝜃 = 5𝑜
300
𝐹𝑇 = 2𝑠𝑖𝑛5 = 1700𝑁 (almost 6 times large)
Precautions in Yosemite Park
Why does the force needed to pull the
backpack up increase?
Atwood’s Machine
FT=? a=?
Draw a free body diagram
for each mass and choose up
positive, then a2= a , a1= -a
FT - m1g = m1a1= -m1a
FT – m2g = m2a2= m2a
-----------------------------------------------------------------------------------
(m1–m2)g=(m1+m2)a
m1  m2
a
g
m1  m2
FT  m1 g  m1 a  m1 ( g  a )
a) When and at what acceleration does the elevator cable break? Mass of elevator
𝑚 = 1800 𝑘𝑔 with load.
Note: The cable of the elevator can stand 28000N
𝐹 −𝑚𝑔
𝐹
28000
𝑚
𝐹 = 𝑚𝑎 and 𝑎 = 𝑇
= 𝑇−𝑔 =
− 9.8 = 5.75 2
𝑚
𝑚
1800
If we go to the moon with this system; the cable breaks at larger acceleration
𝑎=
𝐹𝑇 −𝑚𝑔
𝑚
=
28000
−
1800
1.62 = 13.9
𝑚
𝑠2
b) Work out the acceleration of the system shown if
it is pulled up with a force of 200N.
𝐹=
So, 𝑎 =
𝑚𝑎 = 200𝑁 − 6 + 4 + 5 ∗ 9.8 = 53𝑁
53𝑁
15𝑘𝑔
= 3.53
𝑚
𝑠2
𝑠
Two buckets on a string
a) Buckets are at rest; 𝑚1 = 𝑚2 = 3.5 𝑘𝑔
Upper bucket
𝐹𝑇1 = 𝐹𝑇2 + 𝑚1 𝑔 = 34 + 3.5 ∗ 9.8 = 68𝑁
Lower bucket
𝐹𝑇2 − 𝑚2 𝑔 = 𝑚2 𝑎 = 0; 𝐹𝑇2 = 𝑚2 𝑔 = 3.5 ∗ 9.8 = 34𝑁
b) Buckets are pulled with constant acceleration 𝑎 = 1.6
Lower bucket
𝐹𝑇2 − 𝑚2 𝑔 = 𝑚2 𝑎; 𝐹𝑇2 = 𝑚2 (𝑔 + 𝑎) = 40𝑁
Upper bucket
𝐹𝑇1 = 𝐹𝑇2 + 𝑚1 (𝑔 + 𝑎) = 80𝑁
𝑚
𝑠2
Where does the thread break?
Where does the tread break?
𝐹 = 𝑚𝑎
1)
𝑇1 − 𝑇2 − 𝑚𝑔 = 𝑚(−𝑎)  𝑇1 = 𝑇2 − 𝑚𝑔 + 𝑚𝑎
𝑎 > 𝑔 and 𝑇1 > 𝑇2
Threads break below
2)
𝑇1 − 𝑇2 − 𝑚𝑔 = 𝑚(−𝑎)  𝑇2 = 𝑇1 + 𝑚𝑔 − 𝑚𝑎
𝑎 < 𝑔 and 𝑇2 > 𝑇1
Threads break above
Sliding and hanging blocks
How large are acceleration and tension?
𝐹 = 𝑚𝑎
x-component (𝑚1 )
y-component (𝑚1 )
y-component (𝑚2 )
𝐹𝑇 = 𝑚1 𝑎
𝐹𝑁 − 𝑚1 𝑔 = 0
𝑚2 𝑔 − 𝐹𝑇 = 𝑚2 𝑎
Adding first and third components;
𝑚2 𝑔 = 𝑚1 + 𝑚2 𝑎

𝑎=
𝑚2 𝑔
𝑚1 +𝑚2
Putting 𝑎 into first equation;

𝐹𝑇 =
𝑚1 𝑚2 𝑔
𝑚1 +𝑚2
A parachutist relies on air. Let upward direction be positive and Fair
=620N is the force of air resistance.
𝐹 = 𝑚𝑎
a) What is the weight of the parachutist?
𝑚
𝑊 = 𝑚𝑔 = 55𝑘𝑔 ∗ 9.8 2 = 539𝑁
𝑠
b) What is the net force on the parachutist?
𝐹𝑦 = 𝐹𝑎𝑖𝑟 − 𝑊 = 620𝑁 − 539𝑁 = 81𝑁
c) What is the acceleration of the parachutist?
𝑎𝑦 =
𝐹𝑦
𝑚1 +𝑚2
=
81𝑁
55𝑘𝑔
=
𝑚
1.5 2
𝑠
(upward)
Clicker question
You are in a spacecraft moving at a constant
velocity. The front thruster rocket fires incorrectly,
causing the craft to slow down. You try to shut it
off but fail. Instead, you fire the rear thruster,
which exerts a force equal in magnitude but
opposite in direction to the front thruster. How
does the craft respond?
a) It stops moving.
b) It speeds up.
c) It moves at a constant speed, slower than
before the front thruster fired.
d) It continues at a constant speed, faster than before
the front thruster fired.
© 2016 Pearson Education, Inc.