Transcript User`s MANUAL-eng(CyonX).

DVR SYSTEM
User’s Manual
Manual Revision
: Version 1.0
Release Date
: Nov. 2, 2002
■ SERVER
■ CLIENT
1
INDEX
DVR User’s Manual
1. DVR Sever
1-1. Display Mode
Main screen
Pan/Tilt Control
1-2. Setup Mode
Standard Setup
Recoding Setup
Schedule setup
Motion Detection Setup
Color Setup
PAN/TILT Setup
Network Setup
Backup Setup
1-3. Search Mode
Search screen
Data Back up
Search Data & Time
Print
2. Client program
2
1. DVR SERVER
1-1. Display mode
3
DISPLAY Mode
A
B
H
C
I
D
G
F
E
A . Camera Number/recording state
(
: Camera No. /
: Recording /
: Motion /
: Sensor )
B . Display present images
C. Select screen division among 1/4/6/7/8/9/10/13/16Ch.
D. Auto switching (Rotation) : Displays switching images by 1Ch./4Ch./8Ch. in sequence
with selected time interval.
E. Select camera No.
F . Go to ‘SETUP’ Mode.
G . Go to ‘SEARCH’ Mode.
H. Power
When you click the Power button, DVR system will be shut down.
When you want to go Window mode, Please go to Setup.
I . TIME : Display current time.
4
DISPLAY Mode
L
K
J
J. System Info :
a. Sever mode (O/S)
a
b. Network connection state
b
SYSTEM : No network connection
c
TCP / IP : TCP / IP or Modem connection
c. Present Program Version
d. Capacity of HDD
d
** Control Overlay speed (DF-3000 Model)
Increase Recording frames
Increase Display frames
K. Preview : Display present recording images.
L. PAN/TILT On/OFF (Refer next page)
5
PAN/TILT Control
CLICK!
J
Click !
4
Speed dome control
2
3
1
J. PAN/TILT control :
Click
L
to active Pan/Tilt control panel.
1
Change direction with direction keys
2
ZOOM : Zoom In / Out.
3
Focus : Control Focus.
4
Speed dome control ( Refer the next page)
6
DISPLAY Mode
4
Speed dome control
: Setup Preset of Speed Dome Camera.
1.
: Setup Preset.
2
1
5
3
4
1. Preset Number 2. Preset ID 3. Edit Preset 4. Position
5. Store
How to set Preset
1. Select Preset No.
2. Insert Preset ID.
3. Click
3
to confirm the location.
4. Position : Select a desired place for preset by pan/tilt control panel..
5. Click
5
to save the position.
6. Repeat No.1~5 to add presets.
6. Click
6
to close.
7
DISPLAY Mode
2.
Close this Box
: Setup Group.
Run a Group
4
Stop a Group
Delete a Group
Rename
Rename a Group
3
1
2
9
Delete a Preset
Insert a Preset between lists
8
Add a Preset
5
6
7
How to set a Group
1.
2.
3.
4.
5.
6.
7.
8.
Select Group No. 1
Insert Group Name 2
Click 3 to add Group List on 4 .
Select Preset No. 5
You can test preset by Click
.
Select Moving time to next position. 6
Enter Dwell time for the position. 7
Repeat No.1~6 to add group.
Select a desired group on 4
and click
to run a Group.
9. Click
to stop a Group.
8
1. DVR SERVER
1-2. Setup mode
9
STANDARD SETUP
go to “SETUP” mode
E
1. STANDARD setup : after system installation, setup as user’s requires.
1
2
7
3
4
8
5
9
6
10
11
12
1. Camera name :
2. Watch Dog Enable :
3. Voice :
Check it to display camera name on screen.
Check it for Watch Dog Function.
Check it for recording the voice.
4.Camera auto switching : Select camera switching time (Default : 1sec)
5. System auto reset: Setup a time interval for rebooting the system.
What is ‘ watchdog ’?
When system is unstable while monitoring, it automatically
reboot the system.
10
STANDARD SETUP
1-2. STANDARD Setup
6. Password : Enter new passwords for Setup/Search/View/Power Down mode.
7. Time setup : Setup time of system.
8. Managing Disk : Providing Scandisk
Format Disk function.
Reset Database
19.
Companion : Select compression method.
When you decrease picture quality, the size☞ofCheck
image decrease.
for compression method.
You can see more frames in Remote Access. Click ‘picture Quality’ and adjust it
as user’s requires.
MJPEG
MPEG4
What is ‘Watch Dog’?
2
MPEG4+
When system is unstable while monitoring, it automatically
reboot the system.
☞ Set Up Picture Quality
by dragging bar.
It means the system will
compress image more or
less to adjust image quality.
11
STANDARD SETUP
1-3. STANDARD Setup
10. Reinstall : Reinstall the program.
11. Add Printer : Add printer as user’s require.
1
2
☞ Click ! Next
3
☞Select a manufacturer and model
of the printer.
4
☞ Select Printer Port and click Next.
☞Enter Printer name and click Next.
5
☞ After printing test, click Finish.
12. Power Mode : Select desired power mode when you shut off
DVR System by clicking Power button in Main mode.
Window : Go to Window Mode when you click Power button.
Power off : DVR system power off when you click Power button.
12
8Ch. Or 16 Ch. Extension
DF-1000, 1500, 2000 only
☞ How to extend BNC extension boards with S/W
1. Install DVR capture card.
2. Install DVR S/W.
3. Double click the icon to run the DVR system.
4. After turn on the DVR system, go to SETUP mode and Standard setup.
AM
5. Click the board extension for 8Ch. Or 16Ch.
Ex) If you set 1 BNC extension card, click 8Ch.
If you set 3 BNC extension card, click 16Ch.
6. Click “Apply”
7. Click “OK” to reboot the system for your desired channels
OK
Cancel
13
RECORDING TYPE
2. Recording Type
1
2
3
4
5
6
7
8
9
10
1. Camera Number
2. Connect : Hidden camera function.
‘None’ selected camera does not show images on the screen while recording
so that people can not notice it is recording.
3. Camera name : Click the left button of mouse where you want and enter the camera
name as you want.
4. Event : You can set different recording type (sensor , motion, schedule, record, no
record ) by Mouse click.
When block selected, it can be changed by Right Mouse click.
5. Frame : Adjust recording how many frames for each channel. Set number of
recording frames for all channel at once by right mouse click after select block.
14
RECORDING TYPE
6. Pre : Pre- Alarm function. Setup record-starting time before event happens. (Second)
7. Post : Post- Alarm function. Setup the duration time of recording after event finishes.
(Second)
8. Sensor Type : Select the sensor type. Normal Open / Normal Close Type
• : Normal Close type sensor
O : Normal Open type sensor
9.Time : Set the running time of the alarm control outputs
10. Alarm control
• : Alarm control off
O : Alarm control on
15
SCHEDULE
3. Schedule
2
1
1. Select camera number to record by schedule.
2. Choose Record / Motion / Sensor at the desired day and time box.
☞ Example : How to set a schedule
① Choose a desired camera number
② Drag mouse to decide time table to record.
③ Go back to SETUP/RECORDING TYPE to set Recording type as “Schedule”
④ When you want Motion Detection recording by schedule, Motion detection area
and channels are must be set up correctly.
16
MOTION SETUP
4. Motion
☞ Select the area for motion detection with mouse.
1
2
3
4
1. Channel : Select the specific camera
2. Motion area : To select motion detection area, move the mouse pointer to the
desired area and select the range by dragging the mouse.
No.of Motion detection area is available to set without limit.
3. Sensitivity : Move the bar to adjust the sensitivity of Motion detection
4. Delete : Deselect motion area.
17
COLOR SETUP
5. Color Control
☞ Setup the color of pictures.
1
2
3
4
5
6
7
1. Channel : Select a desired camera No.
2. Color area : The selected camera image is displayed.
3. Bright : Adjust brightness of the image.
Saturation : Adjust saturation of the image.
Contrast : Adjust contrast of the image.
Hue : Adjust hue of the image.
* Move the bar to adjust the images.
4. Setup User’s Default : Setup your desired colors to Default Color
5. Cancel User’s Default : Setup User’s Default Color 4 to DVR Default Color.
6. All Default Color : Set All Camera to Default Color.
7. Default Color : Set a desired Camera to Default Color.
18
PAN / TILT
6. PAN/TILT
☞ Insert PAN/TILT protocol code for brand new PAN/TILT Receiver.
1
3
2
4
1. Select camera No.
2. Chose RX brand or Model name on
2
and click ‘Insert’ button
3. Select COM port.
New Protocol : When you cannot find camera name on
Insert New RX brand or Model name on
4
2
. Click “ Insert ” button to
active protocol code box, or
Just contact where you purchase a system, we will set it for you.
19
NETWORK
7. Control User Remote Access
☞ Select type of network
1
a
test
3
4
test
2
*
*
1. Select TCP/IP for Remote Access (TCP/IP, Modem etc.)
Select No connection when you don’t connect client site via network.
2. Insert ID and Password : client who try to connect from remote site will be checked
and confirm to access when certain IP and Password were already registered or
refuse to connect.
3. Enter new ID and Password and click Add button to be confirmed.
4. Select ID and click
4
to delete ID.
** IP Check for TCP/IP Connection **
a
211. 25. 0. 33
☞ Confirm Ethernet Adapter
address as a server.
20
BACKUP
8. Back Up
8-1. Backup format
1
2
3
a
4
5
6 Send Email
1. Select camera.
2. Select a desired folder to save data.
(Click Backup disk button and then Browse for folder will be displayed.)
3. Select the time period for backup with mouse.
Click again the selected time period to deselect the time.
4. Click Backup button to start data backup.
*CD data backup : Click
a
to format CD before click Backup button.
5. 5 AVI file backup : Refer next page
6. Send Email : Send AVI file via Email.
21
BACKUP
☞ AVI file back up
1
2
3
4
5
6
7
8
1. Select camera No.
2. Select the desired time period
for backup.
9
10
3. Click “ Make AVI… ” button.
4. Select a desired folder to save
data and Insert AVI File Name.
5. Insert Description
6. Select the desired time period for backup.
7. Click “From” to check first data time & image for AVI file
8. Click “To” to check last data time & image of desired AVI file
9. Click “Go” to make AVI file
10. Click “Stop saving AVI file” to stop making AVI file.
☞ Send Email
1. Make AVI file.
2. Fill up all blank
If a file is too big for sender or receiver’s email capacity, It cannot be sent.
22
BACKUP
8. Back Up
8-2. Backup Schedule
Setup a schedule for Auto-backup.
1
2
3
1.
When you want auto back up, select camera and time to back up
2. By click, able to select recorded image data base, and recording reservation time.
3. Auto-backup Setup
Apply all channel :
Select all camera.
Save time : Setup time period of Data for Auto-backup.
Backup time : Setup time for backup.
23
BACKUP
8. Back Up
8-3. Confirm Backup
1
3
2
4
5
1. Select Camera
2. Backed up data list (time table.) :
Check Back Up data – Able to check whether back up data correctly or not.
The image in box when press Play button is from back up media, not from HDD.
3. Play to confirm back up image
4. Slide bar to play.
5. Play :
Play
Stop
24
1. DVR SERVER
1-3. Search mode
25
SEARCH Mode
Go to “SEARCH” mode.
H
C
D
A
E
B
F
G
A. Search screen
B. Time table
Display recorded data with red line along time
1
2
3
1
: Select all cameras for searching
2
: Select desired camera No. for searching
(
4
: Add camera numbers to be selected at same time )
3
: Move the Blue line for desired time for searching.
4
: Capacity of HDD
26
SEARCH Mode
C. ZOOM IN/OUT : Select one channel to Zoom In/Out .
Zoom Out
Default
Zoom In
D. Calendar
Display the date with recorded data with
.
Click desired date, hour & minute for searching
E. Search the recorded data with below buttons
Stop
Play
Playback
Replay the recorded voice
Playback fast
Play faster
Playback each frame
Play each frame
27
SEARCH Mode
F.
: BACKUP
Back up the desired data to FDD
: for one frame image back up
: PRINT
Printing image
1. Select a desired image
2. Enter Title & Event.
3. Send a image via Email.
: EXIT- Go to Display Mode
G. TIME : Display current time.
28
2. CLIENT
29
CLIENT
CLIENT
After Installation of program as same way as server, Double-click
Icon.
A
B
E
Remote site list
C
D
F
A. Site Name : Insert name for a connected site
B. Choose network connection type.
Modem => Phone No.
TCP/IP => IP Address
C. Enter ID & Password for the site.
D. Click “Insert” to add up the remote site list .
“Delete” for delete delete the site from the remote site list
“Replace” to edit the site information
E. E Remote site list : Select your desired site among the list.
F. Connect : Connect to the selected site
30
CLIENT
A
B
E
F
G
C
D
A . Camera Number/recording state
(
: Camera No. /
: Recording /
: Motion /
: Sensor )
B . Display present images
C. Select a screen division among 1/4/6/7/8/9/10/13/16Ch.
D. Select camera No.
E. System Info :
a. client mode ( O/S )
b. Network connection state
a
CLIENT (Win XP)
b
c
SYSTEM : No network connection
TCP / IP : TCP / IP or Modem
c. Present Program Version
d. Capacity of HDD
d
F. Click SAVE to record displaying images of client site at client HDD.
G . TIME : Display current time.
31
CLIENT
H
I
J
K
H. PAN/TILT On/OFF (Refer 6~8 page)
I. Go to ‘ SETUP ’ Mode.
J. Go to ‘ SEARCH ’ Mode
1. Remote Search :
Search images from sever PC.
2. Local Search :
1
2
Search images directly from Client PC.
K. Power
When you click the Power button, DVR system will be shut down
Local Search :
Client PC can record only present display images among images from
Server PC.
(For example, if you select one channel on display mode, only present
Image is recorded on PC.)
32
SETUP Mode
go to “SETUP” mode
I
1
2
3
4
5
6
7
8
9
10
1. Camera Number
2. Connect : Hidden camera function.
‘None’ selected camera does not show images on the screen while recording
so that people can not notice it is recording.
3. Camera name : Click the left button of mouse where you want and enter the camera
name as you want.
4. You can set different recording type (sensor , motion, schedule, record, no record )
by Mouse click. When block selected, it can be changed by Right Mouse click.
5. Adjust recording how many frames for each channel. Setting number of record
frames for all channel at once by right mouse click after select block.
33
SETUP Mode
6. Pre : Pre- Alarm function. Set record-starting time before event happens. (Second)
7. Post : Post- Alarm function. Set record-ending time after event finishes. (Second)
8. Sensor Type : Select the sensor type Normal Open / Normal Close Type
• : Normal Close type sensor
O : Normal Open type sensor
9.Time : Set running time of alarm control outputs
10. Alarm control
• : Alarm control off
O : Alarm control on
34
SEARCH Mode
J
Go to “SEARCH” mode.
C
D
A
E
B
F
G
A. Search screen
B. Time table
Display recorded data with red line along time
1
2
3
4
5
1
: Select all cameras for searching
2
: Select desired camera No. for searching
(
: Add camera numbers to be selected at same time )
3
:
4
: Move the Blue line for desired time for searching.
5
:
Capacity of HDD
Speed delay : Control Display Speed
35
SEARCH Mode
C. ZOOM IN/OUT : Select one channel to Zoom In/Out .
Zoom Out
Default
Zoom In
D. Calendar
Display the date with recorded data with
.
Click desired date, hour & minute for searching
E. Search the recorded data with below buttons
Stop
Playback
Play
X
Playback each frame
Play each frame
36
SEARCH Mode
F.
: BACKUP
Back up the desired data to FDD
: for one frame image back up
: PRINT
Printing image
1. Select a desired image
2. Enter Title & Event.
3. Send a image via Email.
: EXIT - Go to Display Mode
G. TIME : Display current time at client site.
37