Transcript 슬라이드 1 - ApexCCTV

QUICK GUIDE MANUAL
GV-DVR1042
1. System Organization
1. System Organization
2. Specification
Video input
Video output
Video
Audio
Main composite1(BNC), Spot out composite1, VGA(option)
Display resolution
720x480
Record resolution
704x480, 704x240, 352x240
Display Split
Full screen, 4screen
Audio in/out
4 input / 1 output
Compression Format
Modified MPEG4
Recording device
Live deisplay speed
Recording/Playback
4ch(BNC)
HDD(No limitation)
480frame/sec
120frame/sec：352x240
Recording speed
60frame/sec：704x240
30frame/sec：704x480
Recording mode
Pre/post alarm
Network
Backup
Interface
Ethernet
Remote operation
Backup device
Up to 5 sec/ 5min
10/100 base-T
Live monitoring, live recording, search, setup, backup
USB device
File format
AVI,JPG,BMP
Alarm input
4 input
Alarm output
1 relay out
Serial port
RS-485
USB port
1 port
Operation devices
Etc.
Continuous mode, sensor recording, motion recording
Weight
Front panel, remote controller
7kg
Dimension
360x70x360(WxHxD)
Regulatory
CE, FCC, Rohs
2. Installation
1
3
2
4
6
5
7
11
8
9
10
12
13
1
Video In : BNC Port for Connection of DVR & Camera. (4 Camera Connectable)
2
Loop Back : Output DVR Camera Video to Loop Back Port. (4 BNC Port)
3
Monitor Out : Output DVR Video to AV Monitor.
4
Spot Out : Output Spot-out Video to AV Monitor.
5
NTSC/PAL : Select NTSC or PAL Type.
6
VGA OUT : Output Video to a Computer Monitor by Connected VGA
7
SVHS : Video Output.
8
Audio Out : Output Audio Data.
9
Audio In : Audio Input Terminal Related with #1~4 Camera.
10
Ethernet (TCP/IP) : Port for Cross cable
11
Alarm/Relay/RS-485 : Connect Port for Sensor, Relay, & PTZ.
12
RS-232C : Connect Port for Program Debug.
13
DC Power Input : Power Supply by DC 12V Adaptor, supplied.
3. Description
1
CD-RW : CD-RW Device for Backup.
2
Remote Controller Sensor Input.
3
Channel Selection Button : Select Channel or Input Password.
4
Led Indicator : Indicate Present System Status Information.
( POWER: System On/Off , RECORD: Record On/Off ,
NETWORK: Client Network Connection Status, ALARM: Alarm Sensor Detection Status )
5
Search Controller : Searching Recorded Data or Control Menu & PTZ/FOCUS.
6
HOLD : Hold Jog dial.
7
JOG dial: Use for search speed control at search menu.
8
Eject : Eject CD
9
USB Port: USB port for use the USB memory stick and USB HDD Backup
10
SCR MODE : Select Screen Division Mode or Rotation Mode.
11
SEARCH : Go to Search Mode for Searching Data.
12
MENU : Go to System Menu.
13
PTZ/FOCUS : Go to Camera PTZ/FOCUS Control.
14
RETURN : Cancel Setup or Return to Previous Mode.
15
ENTER : Apply Changing Setup.
4. Operation(Server)
4-1. DVR Operation
⊙ Turn on the DVR
1. Press Power Button to Start the System
2. After Checking Hard Disk, Need input Password to Operation
3. Initial Screen View Mode is 4CH Display Mode.
4. Initial Password is 1234.
⊙ Go to Menu
1. Press SETUP Button
2. Ask Password
3. Input Password Using by Channel Select Button.
(Initial Password is 1234)
4. After Input Password, Press Enter to See the Menu
⊙ Go to System setup
1. Choose the “system setup”
2. All installation function can be controlled at this menu.
4. Operation(Server)
⊙ Go to Record Menu
• Schedule Mode: Choose the DAILY or WEEKLY.
• Pre-Event Recording Time : Setup Pre-Event recording Time.
(1~5 sec)
• Post-Event Recording Time: Setup Post-Event recording Time.
(1~180 sec)
Continuous/Motion Record Schedule
1. Parameter
- Size, FPS, quality, audio control
• Move to lower side, press
Enter button twice.
• On yellow frame status, select area
to setup by direction key.
• Setup size, FPS, quality, audio of
each channel.
• Setup each day on weekly mode.
1
1
2-2. Schedule
- Setup continuous/motion record schedule
MOTION
• Selection menu of
NONE/TIMER/MOTION appears.
• Among them, select one for
setup.
• Setup result is displayed as above.
- NONE : Not record
- TIMER : Continuous record(blue)
- MOTION : Motion record（black dot）
• Setup each day on weekly mode.
* Alarm recording setup is almost same with how to continuous recording.
⊙ Go to Archiving
1. All recording function can be controlled at this menu. If CD-RW and USB stick are connected, they will be
detected automatically.
4. Operation(Client)
4-2 Remote S/W Operation
③
④
⑤
⑥
⑦
⑧
①
⑨
⑩
⑪
⑫
⑬
②
⑭
⑮
① Main Screen Image : Showing Present Surveillance Camera Image
② Camera Selection Button : Indicate Connected Camera No. & Select Image to Click Camera No.
③ Hidden/Exit : Hide DVR Client Window or Exit Program
④ Time Output : Showing Present Time & Date
⑤ DVR setup
⑥ Local setup: Setup to connect the DVR
⑦ Search: Search the backup data.
⑧ DVR Selection : Select I/D to Connect Server
⑨ Connect& Disconnect: Connect and Disconnect DVR
⑩ Screen Division Selection : Change Screen Division Mode ⑪ PTZ Control Button : Control
Camera PTZ & Focus
⑪ Event viewer : Showing Present Event in Server & Find Image
⑫ PTZ Control Button : Control Camera PTZ & Focus
⑬ Audio Button and Alarm : Control Two Way Audio & Mute and Alarm On/Off
⑭ Connection Status: Showing the connected DVR.
⑮ Quit : Exit DVR Client
4. Operation(Client)
4-3. How to connect
①
②
③
④
⑤
②
①
③
Group list
DVR Information
Camera Position : Set camera position
Option Check
Add, modify, delete group
④
⑤
1. Click the Setup icon.
2. Click the mouse right button from “Site” icon.
Then see the “add group” icon.
3. Click the “add group” icon and see the below display.
4. Input the name and see the below display.
Input the name, IP, Port and etc.
Press the “add” button. Then it will be
added at the list.
4. Operation(Client)
Choose the group from
And click the
Click the “ Close” button and see the
display mode.
4. Operation(Client)
4-4. How to Setup
Click the
After select the DVR, click the “Select” button.
After input the password and click “ok”, see
below display.
All setup function can be controlled.