Transcript NOTE

Before start the Installation process , follow the following mandatory steps :
 Sales Department will provide an Order No. for New Installation.
 Pass this Order No. to License Dept. along with following information to get the transaction ID.
 Order No.
 Software Name
(e.g. 1234)
(e.g. cApex10)
 Database Name. (e.g. NSE1011)
 Training By*
(e.g. Mr. Nitin Goel)
* Concerned Person for training should be present and let him/her inform that you are giving his/her name for training.
 For Oracle Based Products:
 Server Machine Configuration :

For Windows

32 bit Operating System







Windows 2003 Server (32 bit).
Oracle9i (Release 9.2 or Above) Server or Oracle10gR2.
Processor Dual-Core Intel(R)Xeon Processor , 2-4GB RAM CPU Recommended.
LAN Card 100/1000 Mbps.
CD ROM.
HDD 160 GB or Above 30-40GB Free space on C-Drive.
64 Bit Operating System






Windows 2003 Server(64bit).*
Oracle10g R2(64bit).
Processor Dual-Core Intel(R)Xeon Processor, 2-4GB RAM CPU Recommended.
LAN Card 100/1000 Mbps.
CD ROM.
HDD 160 GB or Above 30-40GB Free space on C-Drive.
Note:
A Internet connection will be required on the system (in network) for regular product updating and activation
Please make sure that Oracle/Operating System must be of Similar Bit Size.

Our Desktop Application Will not be deployed on Windows(64 bit).
Installation process is divided into two parts:
 Part 1: Oracle Installation.
 Part2: Shilpi Product’s Installation (capex10, commex10. Fxfuture, Spotxl, Dgcommex, DPORA,
CDSL, Arbitrage, Real Time Risk Monitoring, Span, Live Trade, NBFC and MF-Office).
Note: * Install Oracle before installing any product.
* Do not install oracle on drive “C”.
1. Double click on it to run
oracle setup
Follow the following steps to install
oracle9i:
 There should be oracle database
dump at which system you are
installing software and be sure it
will be higher than 8i.
 Path oracle_dump\Oracle-9.2
Stage1\install\win32\setup.exe.
 Run Oracle Setup.
 Oracle Universal Installer :
Welcome window will open.
 Click on next.
2.Click on next.
Enter or select
the drive where
you want to
install oracle and
make sure it will
be except
“C “ Drive.
3.Click on next.
*There must be at least 40-50 GB space in drive where oracle is being installed
4.Select Oracle9i
Database 9.2.0.1.0 if you
are installing oracle on
database server.
5. Click on next.
6. Select Enterprise
Edition.
7.. Click on next.
8. Select General
Propose.
9. Click on next.
10. Click on next.
11. Enter database name
you want to create (for
example : NSE1011).
12. Click on next.
13. Click on next.
14. Click on next.
15. Click on Install.
 There are three
stage of oracle to
be installed .
 First stage is
installing here.
16. Write stage 2 (as
shown ) and click on
OK.
17. Write stage 3 (as
shown ) and click on
OK.
18. After completing
third stage, Next option
enabled. Click on Next.
19. It will create clone
database, wait for
completion.
20. Wait for completion of
database creation.
21. Enter same
password in each field
(e.g. s). It is
mandatory.
22. Click on Exit .
23. Installation is completed
& Quit from this Oracle
Universal Installer.
24. Click on yes
 Step1 : Download Oracle Product Setup File named “oracle_products_setup_file.zip” in any drive
(for example E:\) from www.shilpisoft.com under Download Option.
Downloads
oracle_products_setup_file.zip
 Step 2: Extract downloaded file(oracle_products_setup_file.zip).
 Step 3: Run setup (setup.exe) in E Drive. Following window will open.
1.Click on next.
This path
displays by
default
2.Click on
Change to
change the path
e.g. E:\capex10
3. Default path.
4.Enter the path of product
folder & click on OK.
5.Click on Next.
6. Click on Install
7.Wait until the
process complete &
click on Next.
8.Click on finish.
Note: A folder is created with the same name that you have entered above (e.g. : e:\capex10).
 Created folder Capex10 contains deploy10.exe, Dllsetup.exe, licclient.exe, PKUNZIP.EXE , PKZIP.EXE,
sql.ini and xsal2ttp.dll files as shown in the given screen.
 Double Click on deploy10.exe.
 Following window will open:
1.Click on Next.
2.Click on I Accept.
3.Click on Next.
4.Uncheck
these Options.
5. Click on Next.
6.Change Directory name.
7. Directory name must
be same as in step:4 in
product setup.
8.Click on Next
* Change the directory path to where your program folder is. e.g. e:\capex10 as shown in slide
Showing the installation process of Deploy10
9. Click on Finish


After running Deploy10, run DLL setup
Following window will open
DLL setup
1. Click on Next
2. Select custom
3.Click on Next
This path
displays by
default.
4.Click on Change
to change the path
5.Enter path of your
product folder.
6.Click on OK.
7.Click on Next.
8. Click on Install.
Wait until the process complete & click on Next
9. Click on Finish
Note: Do not close this window. It will be closed after processing.
 Open sql.ini from product folder
(e.g..e:\capex10)
Sql.ini
Do entry in sql.ini file under oragtwy
block.
e.g.remotedbname=nse1011,@nse1011
(i.e. name should be match with the
name of database which have been
created)
 Run licclient.exe from e:\capex10
 Test i-Net connection and message should reflect test connection was successful.
 If Connection was not successful then tell the Client to open the port 8089.
1.Click on it to Check
Internet Connection.
Following message
must display
2.Click on OK.
 Go to download option and select product id and tick on QRP, Sqltalk , Application Files, Blank Database
and Print Files.
 Click on Download Now. All files will be downloaded.
NOTE: 2100 and1467 Port should be open to download these Files
 Extract/Unzip the blank data file in
program folder.
Extracted file
Downloaded file
 Run licclient.exe and click on tuned database.
Enter password
(Password must be
same as of Oracle
database creation while
installing oracle )
Select Oracle Version
Enter Database Name
Browse blank data file
i.e. CAPDAT.dat from
capex10 folder.
Click on this button.
Note: Make sure that database must be created before tuning and importing database
 Do not close this window because data is importing here.
 After importing database file there will be a text document pop up and check the status of database which
have been imported,.
Message
 Open notepad & save as cofile.dll in the program folder (capex10) and in which put entry with the
database name and the company name/financial year as shown in the given window:
(For e.g.: nse1011 company name/fin. Year.)
 Note: Make cofile.dll in all the oracle base product except commex10, Fxfuture & SpotXl.
 Run licclient.exe from product folder. (e.g. e:\cApex10)
 Click on Test –I Net Connection , then message must be reflect connection was successful.
3.Click on
Production
Activation
1.Click here to
Check internet
connection .
2. Click on
OK
 Click on Product Activation .Following window will open:
Select New installation
Select Product Type
Enter database name
(which is created at the
time of oracle installation)
Enter Installation Id given
by license department
Click on Get Activation .
Following message will
display
 Go to software folder (for e.g.: capex10)
 Now extract the capex10.zip.
 Make a shortcut on desktop of the
capex10.exe.
 Follow the following steps to make
program shortcut:
 Go to software folder and find
capex10.exe.
 Right click on it.
 Click on Send to>>Desktop
(create shortcut).
 A shortcut will be created on the
desktop.
 Double click on icon of
capex10.exe.
 Following window will open.
 Select the Database to Login
into the software.
 login window will prompt up.
 Click on Default to login into
the software (e.g. cApec10).
 Select utility menu.
 Select Backup of database.
 Following window will open:
1. Select drive & enter file name
as database name with current
date (e.g. NSE1001_03MAR11)
where backup of database will
stored.
2.Click on start to take backup
 Do not close this window because backup is exporting here.
 After exporting backup , there will be a text document pop up and check the status of database you have
been exported.
When you close this window
following message will display
Message
 In Case of other Software’s Installation Database Name should be as following
Software Name
Database Name
Commex10
Comdata
CDSL10
Cdsl1011
NSDL
DP1011
FxFuture
Fxdata
MF10
MF1011
NBFC
NBFC101
Spot
Spotdata