Transcript SEABAS/T3MAPS Software Update

SEABAS/T3MAPS Update
ABHIJEET SOHNI
UNIVERSITY OF WASHINGTON
1
Progress Update
• Breakout Card –
• Received the breakout card from the FAB.
• Soldered the connectors and tested the leads
• Ready to use
• Level Shifter –
• Developed the vector card to level shift
• Tested the regulator function and it outputs 1.5V
• Need to test the level shift function. Will be done this week.
• Software –
• Still figuring out Basil code and how the libraries can be modified to communicate with SEABAS
using TCP
2
Progress Update (break out cards…)
3
Progress Update (level shifter…)
4
Next Steps
• Read through SAM’s python code and Basil code. Understand Basil structure
• Test the Level shifter
5
Project Risk Status
Deliverable
ETA
Status
Risk
Status
Comments
Fully functional SEABAS
Adapter Card/Breakout
board
Original:
10/10/2014
Revised:
11/07/2014
Original Low
:Missed
Revised
:Green
Breakout card and Level shifter done.
Fully functional SEABAS
Software
Original:
10/10/2014
Revised:
11/30/2014
Original Low
:Missed
Revised
:Green
Python code is working on Atlys.
Understand SAM’s code as it uses USB
Pix and communicates using BASILe.
Need to check if TCP can be
implemented easily to leverage existing
Berkeley code.
Fully functional SEABAS
Firmware
Original:
10/31/2014
Revised:
11/30/2014
Original Low
:Missed
Revised
:Green
Max to provide update
6