Transcript File

CPLD (Complex Programmable Logic
Device)
• Need of CPLD :

Due to limitations of SPLDs(PLA and PAL).
 It is Collection of PLDs and interconnection on same die.
 Logic gates upto 10000 gates.
 Vendors: Altera, Atmel, Cypress, Philips etc.
Structural Block Diagram of CPLD

Programmablen I/O blocks
PLD
PLD
PLD
Programmable
Interconnect
PLD
PLD
PLD
Detail Architecture of CPLD
Functional Block
Macrocell
Macrocell:
 Consists:
 AND-OR configuration(5-20 AND gates, OR gates with




5-20 inputs).
Ex-OR gate(provides inverted or noninverted output of
ORgate).
D-Flip-Flop.
Multiplexer.
Buffer.
Advantages of CPLD?
• Ease of Design:
With use of HDL & CPLD development tools
• Reduced Board Area:
As uses VLSI & available in tiny sizes.
• Cost of Ownership:
Due to less maintenance.
• Lower Development Costs
• More product revenue:
Development cycles are very short & get into market
quicker, generates revenue sooner.
• Reliability
Field-Programmable Gate Arrays
 Introduced in 1985 by XILINX Company.
 Since then many different companies developed it: Actel, Altera, Algotronix,
Quick Logic, AMD, Cross Point Solutions etc.
 PLAs: 100s of gate equivalents
 FPGAs: 1000-few hundred 1000s gates
 Logic blocks(CLB)
 Implement combinational
and sequential logic
 Interconnect
 Wires to connect inputs and
outputs to logic blocks
 I/O blocks
 Special logic blocks at
periphery of device for
external connections
CLB(Configurable Logic Blocks)
 Number of ways defining CLB that it varies from simple
AND gate to very complex structure consisting MUX or
LUT & so many PLA kind structure.
FPGA LOGIC BLOCK
 4-input look up table
(LUT)
 Implements
combinational logic
functions
 Register
 Optionally stores output
of LUT
 I/O pads configured as
inputs
 Selectable 2.5 V or 3.3 V
threshold levels
 Optional pull-up resistor
 I/O pads configured as
outputs
 Ability to drive LVTTL
and LVCMOS levels
Xilinx 4000 Interconnect
APPLICATIONS OF FPGA
□Prototyping
-Ensemble of gate arrays used to emulate a circuit to be manufactured
-Get more/better/faster debugging done than with simulation
□ Reconfigurable hardware
-One hardware block used to implement more than one function
□ Special-purpose computation engines
-Hardware dedicated to solving one problem (or class of problems)
-Accelerators attached to general-purpose computers (e.g., in a cell
phone!)
SEQUENTIAL PLD
Output Logic Macrocell (OLM)
combinational config
product term
invert output?
registered config
D F/F
16
Difference between CPLD & FPGA
Sr.
No.
CPLD
1.
Complex
Device
2.
It is collection PLDs.
It is collection of CLBs.
2.
Gate density up to 10000 gates
1000-few hundred 1000s gates
4.
Programmable
FPGA
Logic Field Programmable Gate Array
Interconnection wise it is Programmable at field or site so called
complex so called as CPLD.
as FPGA.
5.
PAL like blocks used as PLDs.
CLBs used as building blocks.
6.
AND-OR arrays are there in PAL LUTs are there in CLBs.
like blocks.
7.
Configuration context is stored in Configuration context is stored in
ROM.
RAM.
8.
Configuration context is Non- Configuration context is volatile.
volatile.