Transcript Document

Front view
LED’s pushed into
place
Buzzer bolted on
Fuse holder
bolted on
Fitting it together
Here is a front and side view
showing how the parts fix into
place
FRONT
SIDE VIEW
Wiring it up
1. Connect the black wire from the buzzer to the tag
and the red wire to the fuseholder
2. Connect the red wire from the battery clip to the other
end of the fuseholder and the black wire to the tag.
3. Connect the wires to the LED’s as shown. They
have to be linked together – in series.
4. Add the resistor and connect it from the spare leg of
the LED to the fuseholder connection – the one with the
red buzzer lead attached.
All you need to do now is
add a battery and test
your fuse tester!