No Slide Title
Download
Report
Transcript No Slide Title
Water Quality
Monroe L. Weber-Shirk
School of Civil and
Environmental Engineering
Water Quality
History
of our understanding of waterborne
disease
Brief history of water treatment
Drinking Water Standards: how do we
decide what is allowed in the water we
drink?
Germ theory
Pasteur (1822-1895)
Lister (1827-1912)
Proved that microorganisms cause fermentation and
disease
Founder of antiseptic medicine and a pioneer in
preventive medicine
Koch (1843-1910)
One of the founders of the science of bacteriology
Discovered the tubercle bacillus (1882) and the cholera
bacillus (1883)
The Flush Toilet’s Connection to
Disease
In
the early 1800s new flush toilets and
sewers carried the waste directly into rivers
and streams
London drained its raw sewage into and
withdrew its drinking water from the
Thames River, both without any treatment.
Several of the drinking water intakes were
below sewage outfalls!
Drinking Water Treatment and
Germ Theory
1829: First sand filter used to treat some of
London's drinking water
1850: John Snow established the link between
drinking water (from a contaminated well) and
Cholera
1872: Poughkeepsie, NY installs first filter in US
1885: Sand filters are shown to remove bacteria
1892: Cholera outbreak in Hamburg, Germany
1892 Cholera outbreak in
Hamburg Germany
Altona's water
intake and
filter beds
Altona
Hamburg
Hamburg's sewer outfalls
Hamburg's water intake
Elbe River
Large outbreak of Cholera in Hamburg
17,000 cases; 8,600 deaths
Very few cases in neighborhoods served by Altona's
filtered water supply
Hamburg's sewers were upstream from Altona's intake!
Disease Definitions
Pathogen:
an agent that causes infection in a
living host. It acts as a parasite within the
host or host cells and disrupts normal
physiological activities
Infection: growth of a disease-producing
organism within the host
Virulence: ability of the pathogen to inflict
damage on the host
Epidemic
An
occurrence of disease that is temporarily
of high prevalence
An epidemic occurring over a wide
geographical area is called a pandemic
Epidemics require
an infected host
_________________________
a number of non-infected potential hosts
__________________________
a mechanism of pathogen transfer
__________________________
Waterborne Threats to Human
Health
Infectious diseases
caused by viruses, bacteria, protozoa (pathogens)
Noninfectious diseases
_____:
acute caused by short term exposure to harmful
chemicals
_______:
chronic caused by long term exposure to harmful
chemicals
low levels of exposure to certain chemicals over a long period
of time may cause cancer, liver and kidney damage, or central
nervous system damage
Pathogens: Protozoa
Organism
Disease
Information
Giardia lamblia
Giardiasis
FDA
Entamoeba histolytica Amebiasis
FDA
Cryptosporidium parvum cryptosporidiosis
FDA
Cyclospora cayetanensis
FDA
Pathogens: Bacteria
Organism
Vibrio cholerae
Shigella spp.
Salmonella typhi
Disease Information
Cholera
FDA
Shigellosis
FDA
Typhoid
FDA
Enterotoxigenic Escherichia coli Gastroenteritis FDA
Pathogens: Viruses
Organism
Disease
Information
Hepatitis A virus
Hepatitis
FDA
Hepatitis E virus
Hepatitis E
FDA
Norwalk virus viral gastroenteritis FDA
Propose a Drinking Water
Standard
You have been granted the authority to regulate
drinking water quality. Create a standard for the
concentrations of disease-causing organisms in
drinking water.
In the absence of technological/economic
constraints,
Which pathogens would you regulate?
What concentration would you choose?
Given technological and economic constraints
how might you change your regulation?
Setting the standards
Legislation
U.S.
Public Health Service set the first
standards for microbiological quality of
drinking water (1914)
Safe
Drinking Water Act (1974)
National
Primary Drinking Water
Standards
A series of amendments
Safe Drinking Water Act (1974)
Specific standards for drinking water
primary (__________)
mandatory
secondary (__________
suggested upper limits for non-health
related parameters)
Applicable to all water supplies serving more than
25 people or having 15 or more service
connections
Enforced by U.S. Environmental Protection
Agency
SDWA Amendment (1986)
Compulsory revisions to Drinking Water Regulations in a
timely fashion for new contaminants
Definition of a treatment technique for each contaminant
regulated
Requirement of treatment technique when not feasible to
measure the concentration of a contaminant
Disinfection required for all water supplies
Prohibition of use of lead products to convey water
Required protection for all groundwater sources
Primary Standards: (Health)
Inorganic chemicals (units of mg/L)
Contaminant
Antimony
Arsenic
Asbestos (fiber >10 micrometers)
Barium
Beryllium
Cadmium
Chromium (total)
Copper
Cyanide (as free cyanide)
Fluoride
Lead
Inorganic Mercury
Nitrate (measured as Nitrogen)
Nitrite (measured as Nitrogen)
Selenium
Thallium
U.S. EPA
0.006
0.05
7 MFL
2
0.004
0.005
0.1
Action Level=1.3; TT8
0.2
4.0
Action Level=0.015; TT8
0.002
10
1
0.05
0.002
A Few Organic Chemicals
(units of mg/L) see the complete list!
Contaminant
MCLG
MCL
Acrylamide
Alachlor
Atrazine
Benzene
1-1-Dichloroethylene
Dioxin (2,3,7,8-TCDD)
zero
zero
0.003
zero
0.007
zero
TT7
0.002
0.003
0.005
0.007
0.00000003
Epichlorohydrin
Ethylbenzene
Ethelyne dibromide
Lindane
Polychlorinated biphenyls (PCBs)
Tetrachloroethylene
Toluene
Total Trihalomethanes (TTHMs)
Trichloroethylene
Vinyl chloride
Xylenes (total)
zero
0.7
zero
0.0002
zero
zero
1
none5
zero
zero
10
TT7
0.7
0.00005
0.0002
0.0005
0.005
1
0.10
0.005
0.002
10
How do they determine MCLGs?
Determine NOAEL (No Observed Adverse
Effect Level) by experimental data on humans or
animals
Divide NOAEL by uncertainty factor (UF)
UF = 10 when good data on humans available
UF = 100 when good data on animals available
UF = 1000 when no good data available
To get reference dose
Determine drinking water equivalent level
Setting the Standards (NonCarcinogens)
For chemicals that can cause adverse non-cancer
health effects, the MCLG is based on the reference
dose.
A reference dose (RFD) is an estimate of the
amount of a chemical that a person can be exposed
to on a daily basis that is not anticipated to cause
adverse health effects over a person's ________.
lifetime
In RFD calculations, sensitive subgroups are
included, and uncertainty may span an order of
magnitude.
MCLG Calculations
reference dose
adult body weight
(70 kg)
daily water consumption
(2 liters)
RFD
M
Q
Drinking Water
Equivalent Level
DWEL
Maximum Contaminant
Level Goal
MCLG
mg O
L
M
Nkg day P
Q
kg
L O
L
M
day P
N
Q
RFD M
mg O
L
DWEL
M
P
Q
NL Q
RFD M
mg O
L
MCLG 0.2
M
P
Q
NL Q
Example MCLG: Lindane
50
mg/lifetime (exposure over 70 years)
mg O
L
RFD = ________
30x10-6
M
P
kg
day
N Q
Estimate the MCLG
RFD M
MCLG 0.2
Q
mg
30 10
70kg
kg day
MCLG 0.2
L
2
day
mg
MCLG=______
0.0002 L
6
L
O
M
NP
Q
Primary Standards : (Health)
Related to Microorganisms
Contaminant
MCLG MCL
Giardia lamblia
zero
TT3
Legionella
zero
TT3 Cause disease
Viruses (enteric)
zero
TT3
Heterotrophic plate count N/A
TT3
Indicators
4
Total Coliforms
zero
5.0%
Turbidity
N/A
TT3 Interferes with
disinfection
What about Cryptosporidium?
Microbial Contaminants
For microbial contaminants that may present
public health risk, the MCLG is set at zero
because ingesting one protozoa, virus, or
bacterium may cause adverse health effects.
EPA is conducting studies to determine whether
there is a safe level above zero for some microbial
contaminants.
The MCL is set as close to the MCLG as feasible,
(the level that may be achieved with the use of the
best available technology, treatment techniques,
and other means which EPA finds are available),
taking cost into consideration.
Treatment Technique (TT)
When there isn’t an economical and technically
feasible method to measure a contaminant, a
Treatment Technique is set rather than an MCL.
A treatment technique is an enforceable procedure
or level of technological performance which
public water systems must follow to ensure
control of a contaminant.
Surface Water Treatment Rule (disinfection and
filtration)
Lead and Copper Rule (optimized corrosion control).
Indicator Organisms
Impractical
to detect, differentiate, or
enumerate all of the pathogenic organisms
that may be present in water
Pathogenic organisms share a common fecal
origin
therefore
limit fecal contamination of water
need a measure of fecal contamination
Ideal Indicator Organism
Be
present when pathogens are
Not reproduce in the environment
Survive at similar rate to pathogens
Correlate quantitatively with pathogens
Be present in greater numbers than
pathogens
Be easily, accurately and quickly detected
Fecal Contamination Indicator:
Coliform Bacteria
Normally
are not pathogenic
Always present in the intestinal tract of
humans and excreted in very large numbers
with human waste
Easier to test for the presence of coliforms
rather than for specific types of pathogens
Are used as indicator organisms for
measuring the biological quality of water
Indicator Organism Failure
Relative
viability of pathogens and indicator
organisms
Some pathogens survive for a longer time in the
environment (raw water concentrations are different)
Effect of treatment processes
Some pathogens are resistant to chlorine
Testing for Coliform Bacteria:
Presence/Absence Tests
Colisure allows testing for coliform bacteria
and/or E. coli in 24 - 28 hours.
The detection limit of ColiSure is 1 colony
forming unit (CFU) of coliform bacteria or E.
coli per 100 mL of medium.
If coliform bacteria are present, the medium
changes color from yellow to a distinct red or
magenta.
If E. coli are present, the medium will emit a
bright blue fluorescence when subjected to a
long wave (366 nm) ultraviolet (UV) light.
Testing for Coliform Bacteria:
Membrane Filtration
Membrane
filter
0.45
μm pores
47 mm in diameter
Filter
100 mL of
water to be tested
through the
membrane filter
Membrane Filtration
Petri dish with
sterile absorbent
nutrient pad
Add 2 mL of mendo broth
(selective
media)
Place membrane
filter in the petri
dish on top of
the nutrient pad
Membrane Filtration:
Incubation and Results
Incubate for 24 hours at
35°C
Coliform bacteria grow
into colonies with a
green metallic sheen
Non-coliform bacteria
may grow into red
colonies
Coliform concentration
is __________________
8 coliform/100 mL
2
1
5
3
7
4
6
8
Turbidity
A measure of the scattering of light by particles in
a suspension
A turbid water sample appears cloudy or “dirty”
High turbidity is the result of lots of light
scattering caused by the particles in suspension
Measured in NTU (Nephelometric Turbidity
Units)
cloud
Turbidity Measurements
lens
90° detector
lamp
0° detector
sample cell
10° detector
LED
Turbidity Sensors
(approximate turbidity measurement)
sample cell
Coagulant Dose
How
will you determine coagulant dose for
your water treatment plant?
What will you monitor to decide if
coagulant dose should be increased or
decreased?
Why is it hard to use feedback (data from a
sensor) to set the coagulant dose?
Secondary Standards:
Aesthetics
Contaminant
Aluminum
Chloride
Color
Copper
Corrosivity
Fluoride
Foaming agents
Iron
Manganese
Odor (Threshold Odor Number)
pH
Silver
Sulfate
Total dissolved solids
Zinc
U.S. EPA, 1993
0.5-0.2 mg/L
250 mg/L
15 color units
1.0 mg/L
Noncorrosive
2.0 mg/L
0.5 mg/L
0.3 mg/L
0.05 mg/L
3 TON
6.5-8.5
0.1 mg/L
250 mg/L
500 mg/L
5.0 mg/L
WHO, 1984
0.2 mg/L
250 mg/L
15 color units
1.0 mg/L
0.3 mg/L
0.1 mg/L
6.5-8.5
400 mg/L
1000 mg/L
5.0 mg/L
Summary
The
causes of waterborne disease have been
identified
Indicator organisms are used to measure the
extent of fecal contamination
Standards for microbiological and chemical
contaminants have been set by US EPA
Waterborne disease continues to be a
significant public health concern