Transcript LET’S GET UPDATING

LET’S GET UPDATING
FUN….FUN….FUN
How to Update Your Web Site
Presented by:
Leonora Fimbres
&
Marci Haight
February 13, 2002
Insert More Pictures
• Put cursor where you
want image to be
• Click image button
• Click browse button
• Find your file
• Click open, apply and
ok
Inserting Links
• Find the link you want to use. Copy it
(control + c) or write down the address.
• Decide where on your page you want the
link and set your cursor there.
• In composer, click on the link button on
the menu bar.
• Enter words to describe link in the top box.
(Example: Crayola Web Page for Kids)
• Enter link address in second box by pasting
(control + v) if you copied or typing in the
address. (Example:
http://www.crayola.com)
• Click APPLY
Adding Pages
• In Netscape composer click on new
• Design your page
• Save it (don’t forget to name it something you
can remember)
• Go back to your main page in composer and
make the link. (See inserting Links)
– Click link button
– Type in what you want seen on your page
– Click browse and find your new page
Adding Pages Continued
– Click open and apply
– Click preview and test out your link!!
Changing or Deleting a Link
• In composer, find the
link and right click on it.
Find remove link and
click on it to remove the
link.
• After right clicking on
the link, choose link
properties to change the
path of the link. Make
necessary changes then
click Apply and OK.
Saving to Disk or Hard Drive
• Save in two places. Usually C or F (shared) drive
along with Floppy or A drive.
• Whenever updating, always save to the same
file, and click yes when asked if you want to
overwrite the file. This will ensure all changes
are saved.
• You DO NOT need to use a new disk every time
you update or make changes to your website.
• Always, ALWAYS save regardless of the size of
the change. Use the main (C) drive or (F) drive
as your main source, and use your disk (A) as a
backup and for Mrs. Cox
Now For the Important
Part: Updating to the
• Right click Start button
Server!
• Click Explore
•
•
•
•
•
•
•
•
Bring up your website folder on the right side.
Click + in front of Network Neighborhood
Click + in front of Hava
Click + in front of HAVA
Click + in front of Web
Click + in front of Web Server Web
Click in front of Public
Click in front of Oro Grande
Updating to Server Continued
• Your name should come up. This is the folder you will
move your updated file into. Left click your updated
material in the right side of your screen (just once!) and
drag it over, placing it into your name folder on the left
hand side.
• A screen will come up asking if you want to replace the
old file with the new. Click yes to all. You should see the
file transfer taking place.
• Now, go to the internet and check your website. You
will probably have to hit refresh to see the changes.
Problem Solving Tips for Updating
• Make sure your image has
been dragged to your name
file if it is a new image.
Otherwise your image will not
show up on the page.
• If you have tried everything,
ASK FOR HELP! It usually
only takes a few minutes to
figure out the problem.
Some Reminders
• Remember to change
your “updated on”
date each time you
make a change
• Check any new links
to make sure they
work.
• Mrs. Cox needs to
see your disk each
time you update,
before it is
republished.