PowerPoint 簡報
Download
Report
Transcript PowerPoint 簡報
The Smartest LineInteractive UPS with
Pure Sine Wave Output
in High Frequency
Technology
Features
Microprocessor controlling
High Frequency Design with High Power Density
Boost and Buck voltage regulation
Pure Sine Wave Output
Selectable output voltage via front panel
Selectable operating mode via front panel
Provide Overload, Short-Circuit, Overheat and Fan
fail Protection.
Available to connect external battery cabinet to
extend the backup time
Hot-Swappable / User replaceable battery design
Features
Available for various installation environment with
individual UPS & EBM case
Output THD<5% with PFC load under Battery Mode
Intelligent Slot for SNMP monitoring
Available for 19” rack installation above 1.5Kva
Green Power function to save battery energy with no
load
Smart RS232 and USB communication port
Available to switch on UPS without battery
EPO switch for operation safety
Models
R750/500: Slim Type with 1U High
1000: Mini-Tower Type
Models
1500/2000VA: 19” Tower-Rack 2-in-1. UPS
and EBM is in different chassis. 2U High.
Models
3000VA: 19” Tower-Rack 2-in-1. 2U High.
Specification
Specification
Rear Panel - 750/1Kva
Input Power Cord
Outlets
RS232
USB
RJ11/RJ45 connector
R750
T1000
Rear Panel – 1.5/2Kva
UPS
EBM
Inlet
External Outlets
SNMP Slot
RS232
USB
External Battery Connector
EPO Connector
RJ11/RJ45
Rear Panel – 3Kva
Inlet
Outlets
SNMP Slot
RS232
USB
Output NFB
External Battery Connector
EPO Connector
RJ11/RJ45
LED Panel
ON/OFF Switch
Self-Test/Silence
Configuration Key
Enter Key
Load Level
Battery Level
Fault LED
Bad Battery LED
OPV Indicator
Operating mode indicator
Line Mode LED
Battery Mode LED
Selectable Output Voltage
The JPX provides the configuration key to let the
user select the suitable output voltage by himself for
220Vac or 230Vac or 240Vac.
Selectable Operating Mode
The JPX also provides the function to let the user to setup
the acceptable operating mode for its application.
Normal: Acceptable AC input voltage for +/-20%.
Generator: No change to voltage window. However, the low frequency
transfer point is changed to 40Hz and there is no limitation for high
frequency transfer point.
Wide Range: The acceptable AC input voltage will be changed to
-30% ~ +20%. But the AVR transfer point would be not changed.
Comparison Table
Item
JPX
SGP APC Smart
Intelligent Charging System
V
V
V
Auto-Restart when Power
Return
Automatic self-test
V
V
V
V
V
V
AVR Function
Cold-Start
V
V
V
V
V
V
Flexible management Card
Audible Alarm
LED indicators
Remote Management
V
V
V
V
V
V
V
V
V
V
V
V
Comparison Table
Item
JPX
SGP APC Smart
RS232/USB Ports
V
RS232
V
Hot-swappable Battery
V
V
V
Failure Notification
V
V
V
1.5Kva
V
X
X
2.2Kva
V
V
V
1.5Kva
X
X
X
V
V
XL models
EPO
Adjustable voltage-transfer
points
Adjustable voltage sensitivity
Adjustable output voltage
External battery connector