Transcript Middleware for control systems - Indico

European Organization for Nuclear Research
DCS remote control in NA62:
Equipment & Control Integration.
Mathias Dutour
NA62 Collaboration
9th December 2009
Outline.





Using ’Supported’ equipment for DCS
integration.
Use case: HYTEC Tell1 crate and ISEG HV
power supply.
Recommendations for equipment selection.
Supported equipment/protocols catalog
(extract).
Forum.
European Organization for Nuclear Research
What ’Supported equipment’ means for DCS
integration.
Benefits for NA62: Save effort and time !
• Focus on the operation, not integration.
• Get benefit from others CERN users experience. ‘Scale’ effect,
trainings, showcases, guidelines.
• Support and maintenance of control sw. is clear.
• You are sure the functionality you need to control your
device is available.
European Organization for Nuclear Research
Equipment integration scenarios in DCS.
Integration scenarios:
Supported
Device
DCS
Not Supported
Customized
• Full chain of control sw.
guaranteed.
• Minimal effort and maintenance
cost.
• Requires modification of standard
solution and testing.
Device
DCS
Device
Hw./Sw.
DCS
European Organization for Nuclear Research
• Functionality and performance
unclear.
• Specific development and
maintenance.
• Cost !!
Use case: HYTEC crate and ISEG power supply.
Integration scenarios:
Supported
ISEG
High
voltage
DCS
Hytec Tell1
Not Supported
Customized
• Checked with the ISEG that our
std. the control solution is adequate.
• Required minor modification of
DCS panels, configuration and
testing.
• In progress:
DCS
Wiener
Interface
European Organization for Nuclear Research
Checking with Hytec/Wiener that the
Wiener interface solution proposed
is adequate.
Recommendations for equipment
selection.
The equipment capabilities are important, so is the control aspect!
Several situations could be encountered:
• Equipment is in the supported –solutions catalog.
• No particular problem, the situation is clear for performance,
functionality, maintenance and support for the control aspect.
• Equipment has a protocol that is in the supported –solutions catalog.
• Make sure the equipment control sw. matches your operation
expectations (functionality, performance). Preference is indeed given to
supported equipment.
• Clarify support/maintenance/licensing aspects of the sw. control aspect
with the manufacturer.
• Consult EN-ICE to verify that easy integration is possible in the
control system.
• Equipment/protocol not in catalog.
• Clarify the availability/possibilities of the remote control solution.
• Evaluate effort for custom-designed integration solution in the control
system.
• Consult EN-ICE to get support to design an efficient integration
solution for your control system. (E.g. NA62 L.A.V.)
European Organization for Nuclear Research
EN-ICE -Supported equipment/protocols
catalog. VME, High and Low voltage PS.
WIENER:
VME crates (CAN or TCP/IP)
PL508 power supplies (CAN, including
those with Digital Output registers)
PL512 power supplies (TCP/IP)
Remote Control Module (TCP/IP)
ISEG:
Equipment, covering the
following hardware series:
EHQ, EHS, EDS High
Voltage modules and ECH
crates.
European Organization for Nuclear Research
CAEN:
The standard CAEN high voltage and low
voltage power supplies for the SY1527
mainframe
The CAEN Easy system, including modules
for high voltage, low voltage, ADC and DAC
The old family of crates (i.e. SY127, SY403,
SY527)
Forum.
Thank you for your attention.
[email protected]
European Organization for Nuclear Research