The Virtual Bouquet

Download Report

Transcript The Virtual Bouquet

Anne Kelly & Company ™
Imagine ~ Dream ~ enjoy
Step-by-Step Design
Oversized Pomanders
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 1
• Locate two wire basket forms…hanging
baskets for plants are perfect and are
available in various sizes.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 2
• Cut Styrofoam pieces to fit inside and fill
the basket forms. Oasis or other foam can
also be used.
*estimate about one sheet of Styrofoam per form.
*if using soaked oasis the form will be very heavy.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 3
Once filled, wire or tape the baskets together to
secure. Locate pins and moss (or anyother material
you choose) to cover the form.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 4
Begin placing and pinning
needed.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
moss into place where
Step 5
• Sheet moss works great here as it can be wrapped around the wire
basket and very little pinning is required.
• Large leaves would also be a fun
medium used to cover the wire form.
*One box of sheet moss will cover approximately 2 large
18” or 3 medium 12” forms.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 6
• To add pops of fresh, trim stem to fit inside a
pointed end water tube.
If using Oasis…simply push the floral stems directly into form.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 7
• Push water tube into Styrofoam form.
Sometimes it is easiest to place the water
tube first, then add the fresh stem.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Step 8
• Continue adding fresh until desired look and
fullness is achieved.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
• 12” forms can easily hold anywhere from 15 to 20 stems of
Gerberas, Roses or other floral, while larger 18” forms can
hold 30 or more stems.
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Oversized pomanders can be made
in all sizes and utilized in many ways
such as entrance or aisle décor…
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
…Then re-invented for
reception décor!
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
…or used to create
phenomenal focal points
of an event space…
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
…hang a few from the ceiling
as another layer of the overall
theme!
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009
Good Stuff to Know ~
• Time estimation of one completed pomander is
anywhere from 30 minutes for fairly simple floral up
to one hour for more detailed designs.
• Cost of base materials is about $30 with retail cost
of floral ranging from $30 for 15 stems of
Gerberas on up.
• Floral will last in water tubes for approximately 5
hours for flowers such as hydrangea to well over 5
hours for roses and gerberas, and all day for most
Orchids
All product, software & ideas included in this presentation Patent Pending;
All rights reserved, copyright Anne Kelly & Company, LLC 2009