Transcript Without Product of B2B Training Slide How to - Me Solution

1
Pradeep Sharma
Email -: [email protected]
12 September 2015
- Signage Setup
- USB Cloning
- Password Change
- Tile Mode
- Fail Over
- ISM Method - Image Sticking Minimization
- Server
-Lock Mode
-DPM Commercial Tv
2
Commercial Monitor
Pradeep Sharma
Email -: [email protected]
Hotel Tv or Commercial Light
12 September 2015
There are two types in the settings menu of the LG Commercial Tv
1. Customer settings Menu
2. Signage menu or Hotel Menu ( Engineer Installation Menu )
How to Enter Signage setup or installation menu
Enter of the Signage setup or installation menu to press 10 seconds setting key .
Then Enter to the password.
0000 or 1105 then press ok key
3
Pradeep Sharma
Email -: [email protected]
12 September 2015
How to download the software from ?
Please visit of LG Commercial web site
http://www.lgecommercial.com
Then click Digital Signage
Then looking the Customer Support option
Then click Download option
Then click Super Sign SW
Then select your Software types
HTNG – Hotel TV Next Generation
HCEC - Hotel Customer Electronics Control
4
Pradeep Sharma
Email -: [email protected]
12 September 2015
Note -: Firstly go to my computer properties and check system information
then Install Software .
5
Pradeep Sharma
Email -: [email protected]
12 September 2015
6
Pradeep Sharma
Email -: [email protected]
12 September 2015
Password Change Menu
You can change your password in the Installation menu.
You can change your password for security purposes. Enter a new 4-digit password. Enter the same
password again in Confirm Password for confirmation
Server Menu
Set Automatically
The monitor settings will be set automatically so that the Super Sign server can search it.
Server IP
This is a menu where you can set an IP address for the Super Sign server.
Server Status
Server Status displays the status of the connection between your monitor and the Super Sign
server.
7
Pradeep Sharma
Email -: [email protected]
12 September 2015
•Not connected - indicates that your monitor is not connected to the Super Sign server.
•Waiting for approval - indicates that your monitor is connected to the Super Sign server
but not yet approved.
•Rejected - indicates that your monitor is connected to the Super Sign server but has been
rejected.
Connected - indicates that your monitor is connected to the Super Sign server and has been
approved.
8
Pradeep Sharma
Email -: [email protected]
12 September 2015
Tile Mode Menu
You can configure the integrated screen in the same way as each screen is configured.
To use this function
•Must be used with multiple monitors.
•Must be operated after connecting the monitors using DP Cable and distributor.
•Tile mode: row x column (r = 1 to 15, c = 1 to 15)
• 15 x 15 available
Row (1-15)
•Set the number of Tile rows.
Column (1-15)
•Set the number of Tile columns.
Tile ID (1-225)
•Set an ID for the Tile.
•The ID you selected will be displayed on the screen.
9
Pradeep Sharma
Email -: [email protected]
12 September 2015
Natural
•For more natural display, the image is partly omitted to account for the distance between the
screens.
Reset
•Resets the Tile Mode option.
•If you select Tile Reset, all Tile settings are reset and the screen returns to the Full Screen
Mode.
10
Pradeep Sharma
Email -: [email protected]
12 September 2015
IP -Internet Protocol
IP address is short for Internet Protocol Internet protocol number which is unique to the
computer in the network is identified .
192.168.1.2
11
Pradeep Sharma
Email -: [email protected]
12 September 2015
Network -: A network is a group of two or more computer systems linked together
Network -Inter Connect
12
Pradeep Sharma
Email -: [email protected]
12 September 2015
Subnet Mask -: Define the network bits and host bits in the subnet mask is
the network
255
255
255
0
255
255
0
0
255
0
0
0
13
Pradeep Sharma
Email -: [email protected]
12 September 2015
Default Gateway
A default gateway is the node on the computer network that the network software uses
when an IP address does not match any other routes in the routing table. In home
computing configurations, an ISP often provides a physical device which both connects local
hardware to the Internet and serves as a gateway.
14
Pradeep Sharma
Email -: [email protected]
12 September 2015
DNS - Domain Name System
Domain Name System name of the function to convert names
to IP and IP to Names .
15
Pradeep Sharma
Email -: [email protected]
12 September 2015
DHCP -Dynamic Host Configuration Protocol
DHCP Automatic IP server gives the client computer in your network .
This process works on D O R A
16
Pradeep Sharma
Email -: [email protected]
12 September 2015
17
Pradeep Sharma
Email -: [email protected]
12 September 2015
18
Pradeep Sharma
Email -: [email protected]
12 September 2015
19
Pradeep Sharma
Email -: [email protected]
12 September 2015
20
Pradeep Sharma Email -:
[email protected]
12 September 2015
21
Pradeep Sharma
IT Master Engineer
Var & Luc Branches
Mo. No- : 09838006133
Website –http://mesolution.weebly.com
12 September 2015