Transcript KX-TDE100/200 System

KX-TDE100/200
System
(Version 1.0)
Chapter 9
Other Functions (2)
Panasonic Communications Co., Ltd.
Office Network Company
Edition 1.3 4th July, 2007
Confidential
1
Chapter 9
Other Functions (2)
1. Enhanced Walking Extension
2. CTI Information
3. Multi-Site PC Programming Tool
4. TDA -> TDE Conversion
Confidential
2
1. Enhanced Walking Extension (1/2)
In addition to swapping the settings between extensions (Walking Extension), you can change the
status of your extension to "Service-in" or "Service-out" (Enhanced Walking Extension).
Click
Here1
Service-in : An extension is in use (normal status).
Service-out : Extension Dial Lock and Do Not Disturb (DND) are activated on an
extension, and the extension user cannot make unauthorized outside
calls nor receive calls.
Click
Here2
Confidential
3
1. Enhanced Walking Extension (2/2)
Distributed Support
Desk
Employee ‘Hot-Desks’
Ext
321
Ext
301
Ext
331
Ext
322
Ext
332
Ext
302
Ext
303
Ext
333
Ext
321
Ext
322
Remote Worker/Office
Worker
Confidential
Ext
334
4
2. CTI Information (1/2)
NO USB port for 3rd party CTI server
3rd Party
CTI server
USB
CTI Information with TDE100/200
1. The TDE100/200 does not have USB port for connection to a 3rd Party CTI server.
2. PC Phone and PC Console are supported on TDE100/200.
3. SIP extension can only be monitored by through CTI (It is not possible to control).
4. TSP Version is v3.0 (To be released shortly).
Type
API/Protocol
First Party Call Control
- TAPI 2.1
Third Party Call Control
- ECMA CSTA Phase 3
- TAPI 2.1
Confidential
5
2. CTI Information (2/2)
(Programming)
TDE programming
tool
Menu Item 1-1Physical SlotIPCMPR-Card
Property-Port
Number
The CTI connection
uses the IP address of
the IPCMPR card to
accept incoming
connections. Both the
maintenance port
number and the CTI
port number are
configurable
Confidential
6
3. Multi-Site PC Programming Tool (1/2)
1.
2.
3.
Confidential
You can make Multi-site programming shortcuts
Up to 4 PBX may be programmed at the same time
Download system data, edit it and then paste it to the
other sites easily
7
3. Multi-Site PC Programming Tool (2/2)
The current implementation of Multi-site Programming is a temporary version.
Full Multi-site Programming will be supported in a future version of the TDE
PCMC.
IP Network
Confidential
RS232C, Modem, and
T76USB connections are
not available for this
feature.
8
4. TDA -> TDE Conversion (1/3)
Step.1 Save TDA100/200 System Data
System Data
KX-TDA100/200
MPR-V3.xx
TDA System
Data File
Condition
To use an existing TDA
configuration you must
first convert the DSys file
to MPR v3.xx
PCMC For TDA100/200
Step.2 Install TDE100/200 PCMC
Install
PCMC Tool
For TDE100/200
Confidential
WARNING!
During DSys conversion certain
portions of data will be erased.
MPR_Conversion_Guide.pdf details
all affected data in section 2.2.
9
4. TDA -> TDE Conversion (2/3)
Step.3 Converting the TDA data file to a TDE100/200 data file using TDE100/200 PC Programming Tool
PC
Programming
For TDE100/200
TDA System
Data File
TDE System
Data File
Use PCMC menu option ‘Tool –
System Data Convert’ to
perform the conversion.
Step.4 Remove the TDA100/200 MPR card and Install the TDE100/200 IPCMPR card
Remove
TDA MPR Card
DSP
Install
Confidential
TDE MPR
Card
1.
2.
3.
4.
5.
6.
Power Off PBX
Remove TDA MPR card
Insert TDE SD card and fit
DSP16/64 card onto TDE100/200
IPCMPR card
Install IPCMPR into TDA MPR slot
Power On
Initialize the PBX
10
4. TDA -> TDE Conversion (3/3)
Step.5 Connect PC Programming
Quick Setup
TDE System
Data File
System Data
KX-TDE100/200
IPCMPR Card
1.
1.
2.
3.
4.
5.
6.
PC Programming
For TDE100/200
Connect to PBX on default IP address (192.168.0.101) using TDE PCMC
or connect to PBX by RS232C
Quick setup starts
Load initial data for the required country
Skip ‘Quick Wizard’ prompts
Upload converted TDE data file
System reset
Program in same way as TDA100/200
Confidential
11
Chapter 9
Other Functions (2)
Thank you very much !
Confidential
12