Transcript QoS Scheduling with Efficient MAC Layer Multiplexing

Lab #3
MANET routing protocol experiment
(AODV)
CS492
Fall 2006
Prof. Sue Moon
Dooyoung Lee
Haewoon Kwak
Hyunwoo Chun
Objectives
•
Configure multi-hop wireless ad-hoc network &
connection test using Iperf
2
2015-07-20
Step 1:
• Learn how to install AODV device driver
3
2015-07-20
How to install AODV
• Download AODV for Windows from
http://www.dsg.cs.tcd.ie/dynamic/?category_id=
379
• Configure wireless adapter to be in ad-hoc mode
– Set the SSID : ex) team_1, team_2, etc
– Set the fixed channel : use channel 6
– Do not configure WEP
• Configure IP address for the interface
– Allocation static IP address & mask : 192.168.143.xxx ,
255.255.0.0
– Do not configure a default gateway
4
2015-07-20
Cont’d
• Enable the “IpEnableRouter” value to 1
• Install the AODV driver
• In the network properties dialog box, click install,
service, have-disk and choose “netfs.inf” file
• Restart your laptop
5
2015-07-20
Step 2 :
• AODV connection test in the
classroom
– How many node are identified
on the route table?
• in the prompt window, input
“route print” and then enter
(if you delete route entry,
“iproute –d IP_address”)
• You can see routes for any
other aodv nodes in range
– Using the Iperf, send/receive
some data under the ad-hoc
network
<IP routing table>
6
2015-07-20
Step 3 :
• AODV routing testing
B’s Route table
A
B
A’s Route table
B
C
A
C
7
C’s Route table
A
2015-07-20
Cont’d
• UDP/TCP test using Iperf
– Group #1 : team#1 to #3
– Group #2 : team#4 to #6
– Group #3 : team#7 to #9
8
2015-07-20
Step 4:
• Describe the mechanisms how can AODV
protocol work in wireless ad-hoc network
• Return your results after testing
– Location of each group’s node
– Throughput
9
2015-07-20