Transcript CCNA 1 Module 11 TCP/IP Transport and Application Layers

CCNA 2 v3.1 Module 6
Routing and Routing Protocols
© 2004, Cisco Systems, Inc. All rights reserved.
1
Purpose of This PowerPoint
• This PowerPoint primarily consists of the Target
Indicators (TIs) of this module in CCNA version
3.1.
• It was created to give instructors a PowerPoint to
take and modify as their own.
• This PowerPoint is:
NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
• Please report any mistakes you find in this
PowerPoint by using the Academy Connection
Help link.
© 2004, Cisco Systems, Inc. All rights reserved.
2
To Locate Instructional Resource
Materials on Academy Connection:
• Go to the Community FTP Center to locate
materials created by the instructor community
• Go to the Tools section
• Go to the Alpha Preview section
• Go to the Community link under Resources
• See the resources available on the Class home
page for classes you are offering
• Search http://www.cisco.com
• Contact your parent academy!
© 2004, Cisco Systems, Inc. All rights reserved.
3
Objectives
© 2004, Cisco Systems, Inc. All rights reserved.
4
Route Types
© 2004, Cisco Systems, Inc. All rights reserved.
5
Specifying Outgoing Interface
© 2004, Cisco Systems, Inc. All rights reserved.
6
Specifying the Next-hop IP Address
© 2004, Cisco Systems, Inc. All rights reserved.
7
Configuring Static Routes
© 2004, Cisco Systems, Inc. All rights reserved.
8
Non-directly Connected Networks
© 2004, Cisco Systems, Inc. All rights reserved.
9
Verifying Static Route Configuration
• The command show running-config is
used to view the active configuration in
RAM to verify that the static route was
entered correctly.
• The show ip route command is used to
make sure that the static route is present
in the routing table
© 2004, Cisco Systems, Inc. All rights reserved.
10
The show ip route Command Output
© 2004, Cisco Systems, Inc. All rights reserved.
11
Troubleshooting Static Route
Configuration
• The show interfaces command
• The ping command
• The traceroute command
© 2004, Cisco Systems, Inc. All rights reserved.
12
The ping and traceroute
Commands
© 2004, Cisco Systems, Inc. All rights reserved.
13
Routed Versus Routing Protocol
© 2004, Cisco Systems, Inc. All rights reserved.
14
Autonomous Systems
© 2004, Cisco Systems, Inc. All rights reserved.
15
Dynamic Routing Operations
© 2004, Cisco Systems, Inc. All rights reserved.
16
Classes of Routing Protocols
© 2004, Cisco Systems, Inc. All rights reserved.
17
Distance Vector Concepts
© 2004, Cisco Systems, Inc. All rights reserved.
18
Distance Vector Network Discovery
© 2004, Cisco Systems, Inc. All rights reserved.
19
Routing Metric Components
© 2004, Cisco Systems, Inc. All rights reserved.
20
Link-State Concepts
© 2004, Cisco Systems, Inc. All rights reserved.
21
Link-State Network Discovery
© 2004, Cisco Systems, Inc. All rights reserved.
22
Link-State Topology Changes
© 2004, Cisco Systems, Inc. All rights reserved.
23
Link-State Concerns
© 2004, Cisco Systems, Inc. All rights reserved.
24
Path Determination
© 2004, Cisco Systems, Inc. All rights reserved.
25
Routing with Network Addressing
© 2004, Cisco Systems, Inc. All rights reserved.
26
IP Routing Configuration Tasks
© 2004, Cisco Systems, Inc. All rights reserved.
27
Using the router and network
Commands
© 2004, Cisco Systems, Inc. All rights reserved.
28
Routing Protocols
© 2004, Cisco Systems, Inc. All rights reserved.
29
Interior/Exterior Routing Protocols
© 2004, Cisco Systems, Inc. All rights reserved.
30
Summary
© 2004, Cisco Systems, Inc. All rights reserved.
31