Transcript Cisco Switch configuration - North Shore Community College

LAN Switch configuration
Telecom II
TEL 202
May 2, 2007
Prof. Scott Stimpson
Scott Robinson
Concetta Sardzinski
Jim Donovan
Real life Introduction
•
•
•
•
•
Large scale LAN example
Single and multi mode fiber
2 Cisco 6500 Routers
1 Cisco 5500 switch
250 users (hosts)
– Remember your subnetting…254 users is 8
host bits
• Cross connects for data and voice
Full LGX Bay
LGX to Comm. room
Fiber to Comm. room
Cisco 6500 Router
Cisco 5500 ATM switch
Switch Redundancy
Fiber Patch
Fiber Feed and Distribution
Loaded 5500 switch
Krone Block
IDF Room
Final Destination
What are our goals?
• To emulate a larger network.
• Demonstrate how a router/switch functions
in the LAN environment.
• Show some basic configuration settings.
• Demonstrate FTP
How did we set it up?
• 1 Cisco CSS 11000 switch
• 1 Laptop set up as a web server and FTP
server
• 3 laptops set up as workstations
Lab Setup
Lab Setup
Network Diagram
Setting up the LAN connection
DHCP is the default
Manually assigning IP addresses
IPconfig…we set it up, why don’t
we see it?
Server VLAN
Configured ports on the switch
Show bridge status
Config t for a new port on switch
IPconfig….now we see it!
Re adding a new port
Adding new VLAN
Show run
Show Int e7
Admin down a port
Admin it back up
commands
Removing a port from the bridge
Now it is gone
FTP config
Ipswitch FTP