Transcript Netflow Technology

Practical use of Netflow technology
Ivan Ivanovic, RCUB/AMRES
Géant3, Skopje, September 2011.
connect • communicate • collaborate
Content
Netflow technology
Configuration of netflow
Data duplication
Timers
Data aggregation
How to solve L2 problem
Netflow probes
Future of netflow
Case study
connect • communicate • collaborate
Netflow Technology – Terminology
What is flow?
Src/dst IP
Src/dst ports
Protocol
QoS
Total bytes, packets, fllows
BGP src/dst AS
Exporter ip
In/out ports
Timestamp
….
….
Router
(Exporter)
connect • communicate • collaborate
Netflow Technology – Overview
•
•
•
•
•
•
•
•
•
Developed by Cisco
IETF standardization – IPFIX.
Netflow V5 and V9 are commonly used.
By default provide us information on the higher levels (L3-L4).
IPFIX (netflow V9) – Also called flexible netflow.
Netflow V9 has support for mpls, mac and IPV6…
In AMRES netflow is only protocol used for IPV6 monitoring.
Other vendors also support netflow protocol (netstream, jflow…).
Less than 1% of total traffic in network
connect • communicate • collaborate
How to start NetFlow data collection?
Most of the routers that are forwarding packets “in software” support NetFlow
protocol.
Some of the switches support NetFlow protocol (Require specialized hardware)
Two groups of dvices regarding NetFlow configuration
– Global control (older devices, in direction is commonly used)
– Per interface control (newer devices, in or out direction can be used)
Globaly controlled allows statistic collecton only on all interfaces in one
direction (commonly in/ingress)
Per interface control allows statistic collecton on the interface in in/ingress or
out/egress direction.
connect • communicate • collaborate
NetFlow data duplication - Ingrees
direction
Host A
NetFlow Collector
connect • communicate • collaborate
NetFlow data duplication - Ingrees
direction
Host A
connect • communicate • collaborate
Netflow data duplication - Ingrees
direction
Gi0/3
Gi0/2
Gi0/1
Gi0/1
Host A
connect • communicate • collaborate
Netflow data duplication - Ingrees
direction
connect • communicate • collaborate
Netflow data duplication - Solution
Problem can be solved if device can control collection of netflow statistic
per interface.
Using Ingress/Egress commands we can control collection of netflow
statistic.
Some of the applications that collect netflow statistic have capabilities to
automatically detect duplicated netflow statistic using combination of
exported fields (src ip, dst ip , src port, dst port, protocol, QoS).
Applications (collectors) that support filtering based on static netflow fields
provide very good solution against data duplication.
ICmyNet.Flow - http://netflow.rcub.bg.ac.rs
connect • communicate • collaborate
Netflow data duplication - Solution
Don’t use netflow statistic that has exporter ip address of device R2 and
ingress interface Gi0/1 of device R2!
Ignore this statistic
Use this statistic
Gi0/1
Gi0/1
Host A
Host B
connect • communicate • collaborate
Netflow data duplication - Solution
Don’t use netlfow statistic that has exporter ip address of device R1 and in
interface Gi0/1 of device R1!
Ignore this statistic
Use this statistic
Gi0/1
Gi0/1
Host A
Host B
connect • communicate • collaborate
Netflow Timers and Aggregation Timestamp problem
connect • communicate • collaborate
Netflow Timers and Aggregation
Most people don't use them.
Some of the applications for netflow collection doesn't use timestamp fields
in exported statistic.
Reasons for that are large amount of netflow data, solution is data
aggregation.
Benefits of using aggregation are small databases and fast applications.
Shortcomings of using aggregation is lack of detail information.
What are netflow timers (aging)?
E.g. Cisco
Normal
Long
Fast (threshold ~100packets)
connect • communicate • collaborate
Netflow Timers – Long aging
Receiving application is using 5 minute aggregation
connect • communicate • collaborate
Netflow Timers – Fast aging
(If your application can detect attack!)
connect • communicate • collaborate
Netflow timers
Exporter is collecting netflow statistic in local memory.
When memory table gets overloaded exporter ages out all flows in the
memory. Then exporter sends all information to the collector and clears
local memory
Special situation can cause memory overload:
Ping sweep
DNS lookups
Exporter can easily detect end of flows that use connection oriented
protocol.
Exporter can only assume when flow, that use connectionless protocol,
ended.
Memory overloading can have influence to the exporter behavior.
Using timers is the only way to age out some flows!
connect • communicate • collaborate
Netflow Probes
Very useful tool!
Lot of useful information can be found on the web page of the Swiss
academic network
http://www.switch.ch/network/projects/completed/TFNGN/floma/software.html
What is netflow probe?
How to use it?
Where to use it?
What do I get?
What do I lose?
connect • communicate • collaborate
Netflow Probe - L2 segment of the
network!
L2 switches usually do not
support netflow protocol.
L2 switches usually support port
mirroring (SPAN)!
E.g. softflowd
http://www.mindrot.org/projec
ts/softflowd/
http://code.google.com/p/softf
lowd/
connect • communicate • collaborate
Netflow Probe – Port mirroring
Extra server (desktop pc).
eth1
eth0
Two Nic cards.
Two ports on the switch.
connect • communicate • collaborate
Netflow Probe – Port mirroring
Institutions on the L2 segment.
connect • communicate • collaborate
Netflow Probe – Virtualization
Tested on Citrix XenServer
Older version of VmWare (3.5) support netflow protocol.
eth0
eth0
eth0
eth0
connect • communicate • collaborate
AMRES configuration
connect • communicate • collaborate
Future of netflow
More and more netflow fields are becoming popular
Cisco is already using netflow to gather statistic about media traffic
(Medianet)
Information’s like jitter, packet delay, packet loss could be also exported via
netflow.
connect • communicate • collaborate
Problem analysis – example I
connect • communicate • collaborate
Problem analysis – example I
connect • communicate • collaborate
Problem analysis – example II
connect • communicate • collaborate
Problem analysis – example II
connect • communicate • collaborate
Problem analysis – example II
connect • communicate • collaborate
END
connect • communicate • collaborate