#### Transcript forcibly push - Cloudfront.net

```Lectures for Conceptual Physics, 8th Ed.
1
Electromagnetic Induction
p436
1820 Hans Oersted showed that current affected a magnet.
1831 Michael Faraday and Joseph Henry made electricity
from magnets. Made it possible to light up cities at night
and ruined the sleep habits of the new era.
It was simple…just rotate (move) a loop of wire in a
magnetic field and electricity was produced.
OR
AND
2
Here is a critical concept!
Magnet being moved.
Coil of insulated wire
The magnet
resists being
moved!
Resistor
The resistor is converting electric power into heat (work).
The source of that power is the person. She has to forcibly
push the magnet into the coil.
The power she puts into making current comes out as heat (work).
The electricity just connects her work
(input) to the work done (output).
3
More on Lenz’s Law:
Moving the magnet to the
right increases the magnetic
field lines in the loop.
The induced current creates a
magnetic field which opposes
this increase.
The repelling magnetic fields explain why you have to push.
That’s it! Tricky but true.
Picture from Serway, vol 2 p990
4
By the way, when you push current goes one way.
Then, when you pull, current goes the other way.
Generators and Alternating Current
Starting and stopping is hard.
p439
It’s easier to make something
rotate…the loop. (fig 24-5)
Rotating the loop induces current
in the loop. This is the input.
The heat and light from the
bulb is the output.
5
+
0
Maximum current
in one direction.
Maximum current in
the other direction.
Nikola Tesla, the scientist, along with George
Westinghouse, the astute business person,
provided the world with abundant electrical
power.
6
Turbogenerator Power
Power in.
p441
Fig 24-9
Power out.
This is the “turbo” part.
This is the generator part.
7
Transformers
p442
Transform voltage from low to high or high to low.
A galvanometer (voltmeter)
Putting an
iron core
through the
coils focuses
the magnetic
field lines.
8
More on Transformers
On the left side (the
primary side) a 1 VAC
input is operating.
It is critical that the input
voltage is alternating, changing
directions.
The magnetic field produced by the primary coil causes an
opposing magnetic field in the secondary coil. (Lenz’s Law)
The fluctuating secondary magnetic field creates
an alternating current in the secondary coil.
Primary voltage
Secondary voltage
=
Number of primary turns
Number of secondary turns
9
The answers are on p 445.
Study the answers…hint, hint!
10
Self-Induction p445
Imagine a large coil with a current running through it. Things are
normal. The current is steady and creating a large magnetic field.
Did I mention that this is
called an electromagnet?
Then you suddenly open the
switch. (Cut off the current.)
The magnetic field with all its energy
collapses quickly producing a giant
current in the other direction which
zaps across the switch.
This phenomenon is also called “back emf”, or
“back electromotive force”.
11
Power Transmission
p446
Large currents in wire create heat and loss of power.
So “electricity” is sent long distances at high voltage and
small currents.
I
V=I
Transformers “step-up” the
voltage at the production
plant.
V
And, transformers “stepdown” the voltage at the
customer end.
12
```