Transcript Slides_on_Portstar_Plusx

Reach Stacker
Sizes used – 18.00-25, 18.00-33, 21.00-35 ( 42-45 Tonne)
All 6 Tires (4 Front & 2 Back) use the same tire size
Front tires are the drive wheels and hence Lug pattern
is preferred in front (re-treading of these tires is common)
Rear tire is the steer tire and hence wear is faster
Higher tread gauge and smooth IND-5S / IND-4S tires are
hence preferred by some operators
Rear tires invariably fail due to lug cracks
which propagate across the carcass which is an
Additional reason for customers preference for smooth
rear patterns
Decision based on application requirement
18.00-25*
18.00-33*
18.00R25*
GALAXY
HARBOUR KING
AL 610
Radial
GALAXY
PORTMAX
18.00-25
GALAXY
PORTSTAR PLUS
AL 315
18.00-33
GALAXY
HM 450E
18.00-25
GALAXY
HM 400S
•18.00-25 is the most popular size used for RS of 40 -45 tonne capacity
•18.00-33 is used for RS of 40-45 tonne capacity having extended capacities denoted by X in their nomenclature
•14.00-24 is used in the less popular RS of 10 tonne capacity (HM 300E /AL 309)
* Limited release for testing
Bias
Types of Reach Stacker
• Reach Stacker
• Characterized by top spreader mechanism for lifting
with high lifting capacity
• Classified based on tonnage (40-45 Tonnes)
• Reach Stacker (Empty Container)
• Characterized by top spreader mechanism for lifting &
limited lifting capacity (14.00-24 fitment)
• Can stacker up to three consecutive rows of Empty
containers
• Classified on tonnage (10 Tonnes)
40
40
40
40
• Laden Container Handler (LCH)
• (Not a Reach Stacker – Similar application equipment)
• Characterized by top spreader mechanism for lifting
(18.00-25, 18.00-33 Fitment)
• Can stacker single rows of empty containers
• Classified based on tonnage (40-45 Tonnes)
Galaxy Port Star Plus / Alliance 315
Features-
TRA
Heavy Duty Construction:
• Specially Constructed Casing: Resists separations
between plies as well as between the tread and the
casing to enable working under high stress conditions
• Reinforced Bead Bundle: High turn up around bead
results in less flexing in bead area, which protects the
bead and minimize the chances of bead failure
• High Lug to Void ratio: Wide flat tread with high
ground contact for even wear & long life
Click for Selection
of Sizes
IND-4 (4.5)
Key
Construction High NSD
feature
Special
Compound
Heat & Abrasion
Resistant Compound
Fabric /
Textile
Construction
Application
Hard & Improved
Surface (Port service)
Why Port Star Plus?
Designed for continues operation of a reach stacker on hard
improved surfaces. The wide profile, greater ground contact area
& maximum NSD makes this tire provide the lowest cost per
hr demanded by equipment contractors
Click on the Home Button to go back to
Positioning
Thank You