File - YEAR 11 EBSS PHYSICS DETAILED STUDIES
Download
Report
Transcript File - YEAR 11 EBSS PHYSICS DETAILED STUDIES
Unit 1 Physics
Detailed Study 3.2
Chapter 11: Astrophysics
Detailed Study 3.2
11 Astrophysics
Key Knowledge and Skills
Section 11.1
The stars – how far, how bright?
Astrophysics
What is the universe?
How and why did the conditions for life to evolve
occur?
Galileo realised that the Earth circled the Sun
By Newton’s time it was realised that the stars must be
other suns
Newton calculate that the stars must be millions of
times further away than our Sun.
Section 11.1
The stars – how far, how bright?
Far far away
The distance to the stars can be measured by the
parallax movement that they show as a result of the
Earth’s revolution around the sun.
Even the largest parallax found is less than 1 arcsec.
(James Bradley, 1729)
Telescope technology became
an important factor
William Struve, 1835 - Vega
Some stars are out of range.
Section 11.1
The stars – how far, how bright?
Far far away
Section 11.1
The stars – how far, how bright?
Measurements:
Arcmin – arc minutes
Degrees are broken up into 60 minutes
Arcsec – Arc seconds
Arc minutes are further divided by 60 arc seconds
1 arc second is 1/3600 of a degree (60*60=3600)
AU – radius of the Earths orbit around the Sun
Parsec – (pc) - parallax angle
caused by the radius of the Earth to the distance of the star
1 parsec is the distance to a star that would show 1 arcsec of
parallax. (206 265 AU)
Light-year – (l.y.)
Distance that light travels in 1 year
Section 11.1
The stars – how far, how bright?
Measurements
Section 11.1
The stars – how far, how bright?
Starlight – how bright?
Astronomers measure the apparent brightness of stars
similar to an ancient scale created by Hipparchus 2nd Century
BC.
First-magnitude (+1) stars were the brightest stars he could
see, second-magnitude (+2) was around half as bright, and so
on all the way to sixth-magnitude (+6) which were barely
visible to the naked eye.
This scale worked well… until astronomers sailed south and
discovered stars brighter then first-magnitude… slightly
problematic.
Section 11.1
The stars – how far, how bright?
Starlight – how bright?
The discovery of stars brighter then first-magnitude
extended the apparent magnitude scale upwards to 0 and
then -1 and so on.
The invention and development of telescopes allowed
for the discovery of stars dimmer then +6, so the scale
was extended downwards, +7 and so on.
In the 19th century astronomers were able to more
accurately quantify the apparent magnitude of a star.
It was determined that each level of magnitude
represents a change in brightness of 2.5 times rather than
Hipparchus double.
Section 11.1
The stars – how far, how bright?
Starlight – how bright?
Section 11.1
The stars – how far, how bright?
Brightness and luminosity
The actual brightness, or Intrinsic brightness measures
the total radiated power of a star, this is measured in
Watts and is know as Luminosity (L).
The apparent brightness (b) of a star can be determined
by calculating the amount of received radiation, this is
measured in Watts per square meter.
Luminosity L=b × 4πR2
Where L is the luminosity in Watts
b is the apparent brightness in W m-2
R is the distance to the star in m
Section 11.1
The stars – how far, how bright?
Stars come in many colours…
When you look up the night sky, you probably just see a
bunch of white dots. However a closer look (like with a timelapse using an SLR) will reveal a variety of different coloured
stars.
Just as the colour of a flame tells you how hot it is, the colour
of a star allows astrophysicists to determine the surface
temperature of a star.
Section 11.1
The stars – how far, how bright?
Stars come in many colours…
By looking at the apparent brightness of three different
spectra, Ultraviolet (U), Violet-Blue (B) and Visible (V) we can
determine the surface temperature of a star.
This can be done by taking a ratio of the brightness in V (bV)
to the brightness in B (bB).
A hot star will radiate mostly in the B spectra compared to
the V, so we would expect to have a small bV/bB ratio.