Transcript Chapter
Section 1
Introduction to Biochemical
Principles
Chapter 1
Biochemistry: An Introduction
Life: It is a Mystery!
Life: It is a Mystery!
Figure 1.1 Diversity of Life
Why study biochemistry?
Foundation upon which
all of the modern life
sciences are built
Biology can’t be done
without biochemistry
Life and its Diversity
Life is Resilient
Section 1.1: What Is Life?
All Life Obeys the Same
Chemical and Physical Laws:
Life is complex and dynamic
Life is organized and selfsustaining
Life is cellular
Life is information-based
Life adapts and evolves
Figure 1.3 Hierarchical Organization
Section 1.2: Biomolecules
Living organisms composed of inorganic and organic
molecules
Water is the matrix of life
Six principal elements: carbon, hydrogen, oxygen,
nitrogen, phosphorous, and sulfur
Trace elements are also important (i.e., Na+, K+, Mg2+,
and Ca2+)
Section 1.2: Biomolecules
Section 1.2: Biomolecules
Major Classes of Small Biomolecules
Many organic molecules are relatively small (less than
1000 Daltons (Da))
Families of small molecules: amino acids, sugars, fatty
acids, and nucleotides
Section 1.3: Is the Living Cell a Chemical Factory?
The properties of even the simplest cells are
remarkable
Autopoiesis has been coined to describe the
remarkable properties of living organisms
Metabolism is defined as:
The acquisition and utilization of energy
Synthesis of molecules needed for cell structure and
function
Growth and development
Removal of waste products
Section 1.3: Is the Living Cell a Chemical Factory?
Biochemical Reactions
Nucleophilic substitution
Elimination
Addition
Isomerization
Oxidation-Reduction
Section 1.3: Is the Living Cell a Chemical Factory?
Energy
Energy is defined as the capacity to do work
Cells generate most of their energy with redox
reactions
The energy captured when electrons are transferred
from an oxidizable molecule to an electron-deficient
molecule is used to drive ATP synthesis
Acquiring energy from the environment happens in
distinct ways:
Autotrophs
Heterotrophs
Section 1.3: Is the Living Cell a Chemical Factory?
Overview of Metabolism
Metabolic pathways come in two types:
anabolic and catabolic
Anabolic: large complex molecules
synthesized from smaller precursors
Catabolic: large complex molecules
degraded into smaller, simpler products
Energy transfer pathways capture energy
and transform it into a usable form
Signal transduction pathways allow cells
to receive and respond to signals
Figure 1.21 A Biochemical
Pathway
Section 1.3: Is the Living Cell a Chemical Factory?
Figure 1.22 Anabolism and Catabolism
Section 1.3: Is the Living Cell a Chemical Factory?
Biological Order
The coherent unity that is observed in all
organisms:
Synthesis of biomolecules
Transport across membranes
Cell movement
Waste removal
Section 1.4: Systems Biology
Systems Biology: Living
Organisms Regarded as
Integrated Systems
Emergence: Interaction of
parts can lead to new
properties
Figure 1.23 Feedback Mechanisms
Section 1.4: Systems Biology
Robustness: Many biological
systems remain stable despite
perturbations
Modularity: Complex systems
are composed of modules
Figure 1.23 Feedback Mechanisms
Chapter 2
Living Cells
Section 2.1: Basic Themes
Figure 2.2 Hydrophobic Interactions Between Water and a Nonpolar Substance
Understanding of the biological context of
biochemical processes is enhanced by examining
six key concepts:
Section 2.1: Basic Themes
Figure 2.2 Hydrophobic Interactions Between Water and a Nonpolar Substance
Water
Unique polar structure
Among its most important properties is interaction
with a wide range of substances
Section 2.1: Basic Themes
Biological Membranes
Thin, flexible, and stable sheet-like structures
Selective physical barrier
Phospholipid bilayer with integral and peripheral
membrane proteins
Figure 2.3 Membrane Structure
Section 2.1: Basic Themes
Self-Assembly
Many biomolecules spontaneously undergo selfassembly into supermolecular structures
Molecular Machines
Many multisubunit complexes involved in cellular
processes function as molecular machines
Figure 2.5
Biological Machines
Section 2.1: Basic Themes
Figure 2.6
Volume Exclusion
Macromolecular Crowding
The interior space within cells is dense and crowded
The excluded volume may be between 20% and 40%
Signal Transduction
Reception, transduction, and response
Section 2.2: Structure of Prokaryotic Cells
Figure 2.7 Typical
Bacterial Cell
Prokaryotes include bacteria and archaea
They have common features: cell wall, plasma membranes,
circular DNA, and no membrane-bound organelles
Section 2.2: Structure of Prokaryotic Cells
Figure 2.8
Bacterial Cell
Section 2.2: Structure of Prokaryotic Cells
Cell Wall
The prokaryotic cell
wall is a complex semirigid structure
primarily for support
and protection
The cell wall is
primarily composed of
peptidoglycan
Figure 2.8 Bacterial Cell
Section 2.2: Structure of Prokaryotic Cells
Figure 2.9 Bacterial
Plasma Membrane
Plasma Membrane
Directly inside the cell wall is the plasma membrane,
a phospholipid bilayer
A selectively permeable membrane that may be
involved in photosynthesis or respiration
Section 2.2: Structure of Prokaryotic Cells
Cytoplasm
Prokaryotic cells do have
functional compartments
Nucleoid, which is centrally
located and contains the circular
chromosome
Also contains small DNA
plasmids
Inclusion bodies are large
granules that contain organic or
inorganic compounds
Figure 2.10 Bacterial Cytoplasm
Section 2.2: Structure of Prokaryotic Cells
Figure 2.7 Typical
Bacterial Cell
Pili and Flagella
Many bacteria have external appendages
Pili (pilus) are for attachment and sex
Flagella (flagellum) are used for locomotion
Section 2.3: Structure of Eukaryotic Cells
Eukaryotic cells are structurally complex
Membrane-bound organelles and the endomembrane
system increase surface area for chemical reactions
Figure 2.11 Animal Cell
Section 2.3: Structure of Eukaryotic Cells
Important structures: plasma membrane,
endoplasmic reticulum, Golgi apparatus, nucleus,
lysosomes, mitochondria, chloroplasts, ribosomes,
and the cytoskeleton
Figure 2.12 Plant Cell
Section 2.3: Structure of Eukaryotic Cells
Figure 2.13
Plasma Membrane
Plasma Membrane
Isolates the cell and is selectively permeable
Outside the plasma membrane are the glycocalyx and
the extracellular matrix
Section 2.3: Structure of Eukaryotic Cells
Endoplasmic Reticulum
The endoplasmic
reticulum (ER) is a series
of membranous tubules,
vesicles, and flattened
sacks
The internal space is
the ER lumen
Figure 2.15
Endoplasmic Reticulum
Section 2.3: Structure of Eukaryotic Cells
Two types:
Rough ER functions
include protein synthesis,
folding, and glycosylation
Smooth ER functions
include lipid biosynthesis
and Ca2+ storage
Figure 2.15
Endoplasmic Reticulum
Section 2.3: Structure of Eukaryotic Cells
Golgi Apparatus
The Golgi apparatus is
formed of large, flattened,
sac-like membranous
vesicles
Processes, packages, and
distributes cell products
Has a cis and a trans
face (cisternae)
Figure 2.16 The Golgi Apparatus
Section 2.3: Structure of Eukaryotic Cells
Cisternal maturation model
vesicles are recycled back to
the cis Golgi from the trans
Golgi
Secretory products
concentrated at the trans
Golgi into secretory vesicles
Involved in exocytosis
Figure 2.17 Exocytosis
Section 2.3: Structure of Eukaryotic Cells
Nucleus
The nucleus is the most
prominent organelle
Contains the hereditary
information
Site of transcription
Nuclear components:
Nucleoplasm
Chromatin (genome)
Nuclear matrix
Nucleolus
Nuclear envelope
Figure 2.18 Eukaryotic Nucleus
Section 2.3: Structure of Eukaryotic Cells
The nuclear envelope
surrounds the nucleoplasm
The nuclear envelope has
nuclear pores referred to as
nuclear pore complexes
Structures through which
pass most of the molecules
that enter and leave the
nucleus
Figure 2.19 The Nuclear
Pore Complex
Section 2.3: Structure of Eukaryotic Cells
Vesicular Organelles
The eukaryotic cell has
vesicles
Vesicles originate in the ER,
Golgi and/or via endocytosis
Figure 2.20 Receptor-Mediated Endocytosis
Section 2.3: Structure of Eukaryotic Cells
Phagocytosis
Receptor-mediated
endocytosis
Endocytic cycle is used for
recycling and remodeling of
membranes
Figure 2.20 Receptor-Mediated Endocytosis
Section 2.3: Structure of Eukaryotic Cells
Vesicular Organelles Continued
Lysosomes are vesicles that
contain digestive enzymes
Enzymes are acid hydrolases
Degrade debris in cells and
involved in autophagy
Figure 2.21 Lysosomes
Section 2.3: Structure of Eukaryotic Cells
Mitochondria
Figure 2.23 The Mitochondrion
The mitochondria
(mitochondrion) are
recognized as the site of
aerobic metabolism
Mitochondria are the
principle source of cellular
energy
Have inner and outer
membrane surrounding the
matrix
Have DNA and ribosomes
Section 2.3: Structure of Eukaryotic Cells
Peroxisomes
The peroxisome is a small organelle containing
oxidative enzymes
Detoxifies peroxides (e.g., H2O2)
Section 2.3: Structure of Eukaryotic Cells
Plastids
Figure 2.25 Chloroplast
Plastids are organelles found
only in plants, algae, and some
protists
Two types: leucoplasts and
chromoplasts
Chloroplasts are
chromoplasts specialized for
photosynthesis
Section 2.3: Structure of Eukaryotic Cells
Cytoskeleton
The cytoskeleton is an intricate supportive network
of fibers, filaments, and associated proteins
Three main components:
Microtubules
Microfilaments
Intermediate filaments
Main functions includE cell shape and structure,
large- and small-scale cell movement, solid-state
biochemistry, and signal transduction
Section 2.3: Structure of Eukaryotic Cells
Figure 2.26 The Cytoskeleton
Section 2.3: Structure of Eukaryotic Cells
Cytoskeleton
Cilia and flagella, whip-like appendages encased in
plasma membrane, are highly specialized for their
roles in propulsion
Bending occurs via ATP-driven structural
changes in dynein molecules
Section 2.3: Structure of Eukaryotic Cells
Figure 2.27 Cilia and
Flagella
Chapter 3
Water: The Matrix of Life
Section 3.1: Molecular Structure of Water
Water is essential for life
Water’s important properties include:
Chemical stability
Remarkable solvent properties
Role as a biochemical reactant
Hydration
Section 3.1: Molecular Structure of Water
Water has a tetrahedral
geometry
Oxygen is more electronegative
than hydrogen
Figure 3.2 Tetrahedral
Structure of Water
Section 3.1: Molecular Structure of Water
Larger oxygen atom has partial negative charge
(d-) and hydrogen atoms have partial positive
charges (d+)
Figure 3.3 Charges on a Water Molecule
Figure 3.4 Water Molecule
Section 3.1: Molecular Structure of Water
Bond between oxygen and hydrogen is polar
Water is a dipole because the positive and
negative charges are separate
Figure 3.5 Molecular
Dipoles in an Electric
Field
Section 3.1: Molecular Structure of Water
An electron-deficient hydrogen
of one water is attracted to the
unshared electrons of water
forming a hydrogen bond
Can occur with oxygen,
nitrogen, and fluorine
Has electrostatic (i.e., opposite
charges) and covalent (i.e.,
electron sharing) characteristics
Figure 3.6 Hydrogen Bond
Section 3.2: Noncovalent Bonding
Noncovalent interactions are electrostatic
Weak individually, but play vital role in biomolecules
because of cumulative effects
Section 3.2: Noncovalent Bonding
Three most important noncoavalent bonds:
Ionic interactions
Van der Waals forces
Hydrogen bonds
Section 3.2: Noncovalent Bonding
Ionic Interactions
Oppositely charged ions attract one another
Ionized amino acid side chains can form salt bridges
with one another
Biochemistry primarily investigates the interaction
of charged groups on molecules, which differs from
ionic interactions like those of ionic compounds (e.g.,
NaCl)
Section 3.2: Noncovalent Bonding
Hydrogen Bonds
Electron-deficient hydrogen is
weakly attracted to unshared
electrons of another oxygen or
nitrogen
Large numbers of hydrogen
bonds lead to extended network
Figure 3.7 Tetrahedral
Aggregate of Water
Molecules
Section 3.2: Noncovalent Bonding
Van der Waals Forces
Occur between neutral,
permanent, and/or induced
dipoles
Three types:
Dipole-dipole interactions
Dipole-induced dipole
interactions
Induced dipole-induced
dipole interactions
Figure 3.8 Dipolar Interactions
Section 3.3: Thermal Properties of Water
Water’s melting and boiling points are
exceptionally high due to hydrogen bonding
Each water molecule can form four hydrogen bonds
with other water molecules
Extended network of hydrogen bonds
Section 3.3: Thermal Properties of Water
Figure 3.9 Hydrogen Bonding
Between Water Molecules in Ice
Maximum number of hydrogen bonds form when
water has frozen into ice
Open, less-dense structure
Section 3.3: Thermal Properties of Water
Water has an exceptionally high heat of fusion and
heat of vaporization
Helps to maintain an organism’s internal
temperature
Section 3.4: Solvent Properties of Water
Figure 3.10 Solvation
Spheres
Water is the ideal biological solvent
Hydrophilic Molecules, Cell Water Structuring, and
Sol-Gel Transitions
Water can dissolve ionic and polar substances
Shells of water molecules form around ions forming
solvation spheres
Section 3.4: Solvent Properties of Water
Figure 3.11 Diagrammatic
View of Structured Water
Structured Water
Water is rarely free
flowing
Water is associated
with macromolecules
and other cellular
components
Forms complex threedimensional bridges
between cellular
components
Section 3.4: Solvent Properties of Water
Figure 3.12 Amoeboid
Movement
Sol-Gel Transitions
Cytoplasm has properties of a gel (colloidal
mixture)
Transition from gel to sol important in cell
movement
Amoeboid motion provides an example of
regulated, cellular, sol-gel transitions
Section 3.4: Solvent Properties of Water
Figure 3.13 The
Hydrophobic Effect
Hydrophobic Molecules and the Hydrophobic Effect
Small amounts of nonpolar substances are excluded
from the solvation network forming droplets
This hydrophobic effect results from the solvent
properties of the water and is stabilized by van der
Waals interactions
Section 3.4: Solvent Properties of Water
Amphipathic Molecules
Contain both polar and
nonpolar groups
Amphipathic molecules
form micelles when mixed
with water
Important feature for
the formation of
cellular compartments
Figure 3.14 Formation of Micelles
Section 3.4: Solvent Properties of Water
Figure 3.15 Osmotic
Pressure
Osmotic Pressure
Osmosis is the spontaneous passage of solvent
molecules through a semipermeable membrane
Osmotic pressure is the pressure required to stop
the net flow of water across the membrane
Osmotic pressure depends on solute concentration
Section 3.4: Solvent Properties of Water
Can be measured with an osmometer
or calculated ( =iMRT)
Cells may gain or lose water because
of the environmental solute
concentration
Solute concentration differences
between the cell and the environment
can have important consequences
Isotonic solution
Hypotonic solution
Hypertonic solution
Figure 3.17 Effect of Solute Concentration on Animal Cells
Section 3.4: Solvent Properties of Water
Proteins with ionizable amino acid side chains affect
cellular osmolarity by attracting ions of opposite
charge
There is asymmetry of charge across the membrane
due to ions forming an electrical gradient (membrane
potential)
Unlike animal cells, plant cells use osmotic pressure
to drive growth via turgor pressure
Section 3.5: Ionization of Water
Water can occasionally ionize, forming a hydrogen
ion (H+) and a hydroxide ion (OH-)
In an aqueous solution, a proton combines with a
water molecule to form H3O+ (hydronium ion)
H2O H+ + OH- (reversible)
Section 3.5: Ionization of Water
The ion product of water is referred to as Keq[H2O]
or Kw = [H+][OH-]
Kw at 25°C and 1 atm pressure is 1.0 10-14
Kw is temperature-dependent; therefore, pH is
temperature-dependent as well
Section 3.5: Ionization of Water
Acids, Bases, and pH
An acid is a proton donor
A base is a proton acceptor
Most organic molecules that donate or accept
protons are weak acids or weak bases
A deprotonated product of a dissociation reaction
is a conjugate base
Section 3.5: Ionization of Water
The pH scale can be used to
measure hydrogen ion
concentration
pH=-log[H+]
Figure 3.18 The pH Scale and the pH Values of
Common Fluids
Section 3.5: Ionization of Water
pKa is used to express the
strength of a weak acid
Lower pKa equals a stronger
acid
pKa=-logKa
Ka is the acid dissociation
constant
Figure 3.18 The pH Scale and the pH Values of
Common Fluids
Section 3.5: Ionization of Water
Section 3.5: Ionization of Water
Buffers
Regulation of pH is universal and essential for all
living things
Certain diseases can cause changes in pH that can
be disastrous
Acidosis and Alkalosis
Buffers help maintain a relatively constant
hydrogen ion concentration
Commonly composed of a weak acid and its
conjugate base
Section 3.5: Ionization of Water
Buffers Continued
Establishes an
equilibrium between
buffer’s components
Follows Le Chatelier’s
principle
Equilibrium shifts in
the direction that
relieves the stress
Figure 3.19 Titration of Acetic Acid
with NaOH
Section 3.5: Ionization of Water
Henderson-Hasselbalch Equation
Establishes the relationship between pH and pKa for
selecting a buffer
Buffers are most effective when they are composed of
equal parts weak acid and conjugate base
Best buffering occurs 1 pH unit above and below the
pKa
Henderson-Hasselbalch Equation
pH = pKa + log
[A-]
[HA]
Section 3.5: Ionization of Water
Worked Problem 3.5 (Page 91)
Calculate the pH of a mixture of 0.25 M acetic acid
(CH3COOH) and 0.1 M sodium acetate (NaC2H3O2)
The pKa of acetic acid is 4.76
Solution:
pH = pKa + log
pH = 4.76 + log
[acetate]
[acetic acid]
[0.1]
[0.25]
= 4.76 + 0.398 = 4.36
Section 3.5: Ionization of Water
Figure 3.20 Titration of
Phosphoric Acid with
NaOH
Weak Acids with Multiple Ionizable Groups
Each ionizable group can have its own pKa
Protons are released in a stepwise fashion
Section 3.5: Ionization of Water
Physiological Buffers
Buffers adapted to solve specific physiological
problems within the body
Bicarbonate Buffer
One of the most important buffers in the blood
CO2 + H2O H+ + HCO3- (HCO3- is bicarbonate):
This is a reversible reaction
Carbonic anhydrase is the enzyme responsible
Section 3.5: Ionization of Water
Phosphate Buffer
Consists of H2PO4-/HPO42(weak acid/conjugate base)
H2PO4- H+ + HPO42Important buffer for
intracellular fluids
Protein Buffer
Proteins are a significant
source of buffering capacity
(e.g., hemoglobin)
Figure 3.21 Titration of
H2PO4- by Strong Base
Chapter 4
Energy
Section 4.1: Thermodynamics
Energy is the basic constituent of the universe
Energy is the capacity to do work
In living organisms, work is powered with the
energy provided by ATP
Thermodynamics is the study of energy
transformations that accompany physical and
chemical changes in matter
Bioenergetics is the branch that deals with
living organisms
Section 4.1: Thermodynamics
Bioenergetics is especially important in
understanding biochemical reactions
These reactions are affected by three factors:
Enthalpy—total heat content
Entropy—state of disorder
Free Energy—energy available to do chemical work
Section 4.1: Thermodynamics
Three laws of thermodynamics:
First Law of Thermodynamics—Energy cannot be
created nor destroyed, but can be transformed
Second Law of Thermodynamics—Disorder always
increases
Third Law of Thermodynamics—As the temperature of a
perfect crystalline solid approaches absolute zero,
disorder approaches zero
Section 4.1: Thermodynamics
First two laws are powerful
biochemical tools
Thermodynamic transformations
take place in a universe composed
of a system and its surroundings
Energy exchange between a
system and its surroundings can
happen in two ways: heat (q) or
work (w)
Figure 4.2 A Thermodynamic
Universe
Work is the displacement or
movement of an object by force
Section 4.1: Thermodynamics
First Law of Thermodynamics
Expresses the relationship between internal energy
(E) in a closed system and heat (q) and work (w)
Total energy of a closed system (e.g., our universe)
is constant
DE = q + w
Unlike a human body, which is an open system
Enthalpy (H) is related to internal energy by the
equation: H = E + PV
DH is often equal to DE (DH = DE)
Section 4.1: Thermodynamics
First Law of Thermodynamics Continued
If DH is negative (DH <0) the reaction gives off heat:
exothermic
If is DH positive (DH >0) the reaction takes in heat
from its surroundings: endothermic
In isothermic reactions (DH =0) no heat is
exchanged
Reaction enthalpy can also be calculated:
DHreaction = SDHproducts SDHreactants
Standard enthalpy of formation per mole (25°C,
1 atm) is symbolized by DHf°
Section 4.1: Thermodynamics
Figure 4.3 A Living Cell as a
Thermodynamic System
Second Law of Thermodynamics
Physical or chemical changes resulting in a release
of energy are spontaneous
Nonspontaneous reactions require constant energy
input
Section 4.1: Thermodynamics
As a result of spontaneous
processes, matter and
energy become more
disorganized
Gasoline combustion
The degree of disorder is
measured by the state
function entropy (S)
Figure 4.4 Gasoline Combustion
Section 4.1: Thermodynamics
Second Law of Thermodynamics Continued
Entropy change for the universe is positive for every
spontaneous process
DSuniv = DSsys + DSsurr
Living systems do not increase internal disorder; they
increase the entropy of their surroundings
For example, food consumed by animals to provide
energy and structural materials needed are converted
to disordered waste products (i.e., CO2, H2O and heat)
Organisms with a DSuniv = 0 or equilibrium are dead
Section 4.2: Free Energy
Free energy is the most
definitive way to predict
spontaneity
Gibbs free energy change or DG
Figure 4.5 The Gibbs
Free Energy Equation
Negative DG indicates
spontaneous and exergonic
Positive DG indicates
nonspontaneous and endergonic
When DG is zero, it indicates a
process at equilibrium
Section 4.2: Free Energy
Standard Free Energy Changes
Standard free energy, DG°, is defined for reactions
at 25°C,1 atm, and 1.0 M concentration of solutes
Standard free energy change is related to the
reactions equilibrium constant, Keq
DG° = -RT ln Keq
Allows calculation of DG° if Keq is known
Because most biochemical reactions take place at or
near pH 7.0 ([H+] = 1.0 10-7 M), this exception can be
made in the 1.0 M solute rule in bioenergetics
The free energy change is expressed as DG°′
Section 4.2: Free Energy
Figure 4.6 A Coupled Reaction
Coupled Reactions
Many reactions have a positive DG°′
Free energy values are additive in a reaction
sequence
If a net DG°′ is sufficiently negative, forming the
product(s) is an exergonic process
Section 4.2: Free Energy
The Hydrophobic Effect Revisited
Understanding the spontaneous aggregation of
nonpolar substances is enhanced by understanding
thermodynamic principles
The aggregation decreases the surface area of their
contact with water, increasing its entropy
The free energy of the process is negative; therefore,
it proceeds spontaneously
Spontaneous exclusion of water is important in
membrane formation and protein folding
Section 4.3: The Role of ATP
Figure 4.7 Hydrolysis
of ATP
Adenosine triphosphate is a nucleotide that plays
an extraordinarily important role in living cells
Hydrolysis of ATP ADP + Pi provides free energy
Section 4.3: The Role of ATP
Drives reactions of
several types:
1. Biosynthesis of
biomolecules
2. Active transport
across membranes
3. Mechanical work
such as muscle
contraction
Figure 4.8 The Role of ATP
Section 4.3: The Role of ATP
Structure of ATP is ideally
suited for its role as
universal energy currency
Its two terminal
phosphoryl groups are
linked by
phosphoanhydride bonds
Specific enzymes
facilitate ATP hydrolysis
Figure 4.9 Structure of ATP
Section 4.3: The Role of ATP
Figure 4.10 Transfer of
Phosphoryl Groups
The tendency of ATP to undergo hydrolysis is an
example of its phosphoryl group transfer potential
ATP acts as energy currency, because it can carry
phosphoryl groups from high-energy compounds to
low-energy compounds
Section 4.3: The Role of ATP
Section 4.3: The Role of ATP
Figure 4.11 Contributing Structure of the Resonance Hybrid of Phosphate
Several factors need to be considered to understand
why ATP is so exergonic:
1. At physiological pH, ATP has multiple negative charges
2. Because of resonance stabilization, the products of ATP
hydrolysis are more stable than resonance-restricted ATP
Resonance is when a molecule has two or more
alternative structures that differ only in the position of
their electrons
3. Hydrolysis products of ATP are more easily solvated
4. Increase in disorder with more molecules