Transcript Chapter 13

Chapter 13
POLYFUNCTIONAL ACIDS
DESCRIBING POLYFUNCTIONAL BASES
FINDING THE pH OF SOLUTIONS OF AMPHIPROTIC SALTS
CONSTRUCTING TITRATION CURVES FOR POLYFUNCTIONAL ACIDS
DRAWING TITRATION CURVES FOR POLYFUNCTIONAL BASES
THE COMPOSITION OF POLYPROTIC ACID SOLUTIONS AS A FUNCTION OF pH
POLYFUNCTIONAL ACIDS
This chapter, we describe methods for computing the necessary data to litration curves for acids and bases that have two or more acidic or
basic functional groups. Solutions of amphiprotic salts and the composition polyprotic acid solutions as a function of pH are also discussed
DESCRIBING POLYFUNCTIONAL BASES
Polyfunctional bases such as sodium carbonate, are also common. Carbonate conjugate- base of the hydrogen carbonate
ion, is involved in the stepwise equilibria
When two adjacent stepwise equilibria are added, the equilibrium constant for the resulting overall reaction is the product of the two
constants. Thus,. for the first two dissociation equilibria for H3PO4.
Where Kal and Ka2 are the first and second dissociation constants for carbonic acid and Kb1 and Kb2 are the first and second
dissociation constants of base CO32- . In some cases, we must also consider a third equilibrium namely.
H2CO3
CO2(aq) + H2O.
Because of the limited solubility of CO2, this last reaction can limit the concentration of H2CO3 in solution. For our pup however,
we will neglect this reaction. The overall basic dissociation reaction of sodium carbonate is described the equations
The pH of polyfunctional systems, such as phosphoric acid or sodium carbonate, can be computed rigorously through use of the
systematic approach! multiequilibrium problems. Solving the several simulitaneous equations that are involved can be difficult and
time consuming, pan lady if a computer is not handy.
FINDING THE pH OF SOLUTIONS OF AMPHIPROTIC SALTS
So far it has not discussed how to calculate the pH of solutions of salts that have both acidic and basic properties, that is, salts that
are amphiprotic. Such salts are formed during neutralization titration of polyfunctional acids and bases. When 1 mol of NaOH is
added to a solution containing if 1 mol of the acid H2A, 1 mol of NaHA is formed. The pH of this solution is determined by two
equilibria established between HA- and water. The solution could be a basic becasue
Whether a solution of NaHA is acidic or basic depends on the relative magnitude constants for these processes
where Ka2 and Kb2 are the acid dissociation constants for H2A and Kb2 is the basic otherwise acidic ion constant for
HA-. If Kb2 is greater than Ka2, the solution is basic or otherwise acidic.
A solution of the amphiprotic salt NaHA contains five species H3O+, OH-, H2A, HA- and A2". Thus, five independent equations are
needed to compute hydronium ion concentration rigorously. As we can see in picture above, the solution equations yields an
approximate value of [H3O+] that is given by the equation
CNaHA is the molar concentration of the salt NaHA. This equation should be used when NaHA is the only species that contributes
significantly to the pH of a solution. This is true of every dilute solutions of NaHA or for systems in Ka2 or Kw / Ka2 is relatively large.
We first write a mass-balance expression. That is,
The charge-balance equation takes the form
Since the sodium ion concentration is equal to the molar analytical concentration of
the salt, the last equation can be rewritten as
We now have four algebraic equations and need one additional to solve for the four
knowns. The ion-product constant for water serves this purpose:
The rigorous computation of the hydronium ion concentration from these four
equations is difficult. A reasonable approximation, applicable to solutions of most salts,
however, can be obtained as follows.
Steps
1.We first subtract the mass-balance equation from the charge-balance equation.
2. We then rearrange the acid-dissociation constant expressions for H2A to obtain
and for HA to give.
3. Substituting these expressions and the expression for Kw into equation.
These examples are self explanatory, they are straight out of the text, they work in unison with the aforementioned
equations an on finding the pH of solution.
CONSTRUCTING TITRATION CURVES FOR POLYFUNCTIONAL ACIDS
Figure in slide 3 shows the titration curve for a diprotic acid H2A with dissociation constants of Ka1 = 1.00 X 103 and Ka2 =
1.00 X 10-7. Because the ratio Kal/Ka2 is significantly greater than 103, we can construct this curve using the techniques
developed in previous chapter for simple monoprotic weak acids. Thus, to maintain the initial pH (point A), we treat the system
as if it contained a single monoprotic acid with a dissociation constant of Kal = 1.00 X 10-3. In region B have the equivalent of a
simple buffer solution consisting of the weak acid Hi and its conjugate base NaHA. First equivalence point, we have a solution
of an acid salt and use equations or one of its simplifications to compute the hydronium ion concentration, we have a second
buffer consisting of a weak acid HA~ anil gate base Na2A, and we calculate the pH employing the second dissociations
constant, Ka2 = 1.00 X 10-7. Just prior to the second equivalence point
Sulfuric acid is unusual in that one of its protons behaves as a strong acid in water and the other as a weak acid
(Ka2 = 1.02 X 10-2). Let us consider how the hydronium ion concentration of sulfuric acid solutions is computed
using a 0.0400M solution as an example.
We will first assume that the dissociation of HSO4 is negligible because of the large excess of H30+ resulting
from the complete dissociation of H2SO4. Therefore,
[H3O+] ≈ [HSO4 ] ≈ 0.0400 M
An estimate of [SO4-] based on this approximation and the expression for Ka2, however, reveals that
0.0400[S04-] = 1.02 X 10-2
0.0400
This result shows that [SO4- ] is not small relative to [HSO4 ], and a more rigorous solution is required.
From stoichiometric considerations, it is necessary that
[H3O+] = 0.0400 + [SO42-]
To be continued
The first term on the right is the concentration of H3O+ from
dissociation of the H2SO4 to HSO4 . The second term is the contribution of the
dissociation of HS04 . Rearrangement yields
[SO4] = [H30+] - 0.0400
Mass-balance considerations require that
CH2SO4, = 0.0400 = [HS04- ] + [SO42-]
Combining the last two equations and rearranging yields
[HSO4] = 0.0800 - [H3O+]
Introduction of these equations for [SO4-] and HSO4 into the
expression for yields
DRAWING TITRATION CURVES FOR POLYFUNCTIONAL BASES
The construction of a titration curve for a polyfunctional base involves no new principles. To illustrate, consider the titration of
a sodium carbonate solution with standard hydrochloric acid. The important equilibrium constants are
Figure Curve for the titration of 25.00 mL of 0.1000 M Na2CO, with 0.1000 M HC1
The molecular structure of glycine. Glycine is one of the so-called nonessential ammo acids; it is nonessential
in the sense that it is synthesized in the bodies of mammals and so is not generally essential in the diet. Because
of its compact structure, glycine acts as a versatile building block in protein synthesis and in the biosynthesis of
hemoglobin. A significant fraction of the collagen, or the fibrous protein constituent of bone, cartilage, tendon,
and other connective tissue, in the human body is made up of glycine. Glycine is also an inhibitory neurotransmitter and, as a result has been suggested as a possible therapeutic agent in diseases of the central nervous
system such as multiple sclerosis and epilepsy. The calming effects of glycine are currently being investigated
to assess its utility in the treatment of schizophrenia.
•
The zwitterion of an amino acid, containing as it does a positive and a negative charge, has no tendency to migrate in an electric
field, whereas the singly charged anionic and cationic species are attracted to electrodes of opposite charge.
•
No net migration of the amino acid occurs in an electric field when the pH of the solvent is such that the concentration of the anionic
and cationic forms are identical.
•
The pH at which no net migration occurs is called the isoelectric point; this point is an important physical constant for characterizing
amino acids. The isoelectric point is readily related to the ionization constants for the species. Thus, for glycine,
A titration curve for the zwitterion of alanine was presented in another chapter illustrate the determination of pK
values. For simple amino acids, Ka and Kb are generally so small that their quantitative determination by
neutralization titrations is impossible. Amino acids that contain more than one carboxyl or amine group can
sometimes be determined. If the Ka values are different enough (104 or more), stepwise end points can be
obtained just like other polyfunctional acids or bases as long as the Ka values
THE COMPOSITION OF POLYPROTIC ACID SOLUTIONS AS A FUNCTION OF pH
I has now been shown how alpha values are useful in visualizing the changes in the concentration of various
species that occur in a titration of a simple weak acid. Alpha values can also be calculated for polyfunctional
acids and bases. For example, if we let ct be the sum of the molar concentrations of the maleate-containing
species in the solution throughout the titration described in Example 13-4, the alpha value for the free acid au
is defined as
The alpha values for HM- and M2- are given by similar equations:
The sum of the alpha values for a system must equal unity:
The alpha values for the maleic acid system are readily expressed in terms of [H3O+], Ka1, and Kb1. We follow the
method used to obtain equations