Transcript acoolcsrs9devilred.pps

PGS Introduction
"Value Series" : Best VALUE gaming cases with the
highest C/P Ratio (Cost to Performance ratio).
"Professional Series – Red label" : Super tower or Super
mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases
targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming
cases targeting at the extreme gamers. This Series offers
gamers with most functions, expandability and Extreme
cooling.
"Compact – Blue Label" : Small form factor case series
including cube cases, mini-ITX and Mini-Tower
(Micro-ATX).
Red
Rs-9 Devil Red is one of the best “Mid-Tower” case in the
market today. This case is not only elegantly designed and
solidly constructed; it also delivers high performance,
expandability, protection and cooling. The "ALL BLACK"
chassis (both internal and external) with Black/Red screwless clips, fans and PCI-cover give this chassis a GREAT
look.
The Rs-9 Devil Red is designed with “User-Friendly” concept
in mind and it gives gamers great expandability and
protection for their Hard Drives. Its “Screw-less” chassis and
Pre-drilled holes on the motherboard plate for cable routing
make this chassis an easy install. This chassis also offers
great expansion capabilities. It can support 9 x 5 1/4”
devices, 3 x 3.5" HDDs (internal) and 1 x 3.5" external
device such as a Floppy drive or a Card Reader. Your Hard
Drives are well protected from shock with the “anti-vibration”
rubbers.
The Rs-9 Devil Red case also delivers optimal air flow and
supports Longer High-End VGA cards up to 295mm. Your
system will be cooled by 6 x 12/14cm fans (1 x12cm fan in
front, 1 x 12cm fan in the rear, 2 x 12/14cm fans on top and
2 x 12cm fans on the side panel). These fans can be
controlled by a "3-Mode" LED fan controller (Low speed,
Medium Speed and High Speed).
Design Concept
Aerocool is proud to announce our first Mid-Tower case
(Model : Rs-9 Devil Red) under the PGS-R series
(Professional Series – Red Label).
Gallery
Front
Back
Top
Photos are for exterior
reference only. Not all fans
are inclusive.
Please see specification
page.
Side
- Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese Steel
and beautifully finished ALL BLACK interior
- High-end Graphic card Support - Supports longer high-end VGA cards up to
295mm
- High Expandability - Supports 9 x 5 1/4" bays, 3 x 3.5" HDDs (internal) and 1 x
3.5" external devices such as Floppy or a Card Reader.
- HDD Protection - Includes anti-vibration rubbers to protect your HDDs from
shock.
- Ease of Installation – New "Easy-install" screw-less kits are included for the
5 1/4" devices.
- Easy Access Top I/O ports - 2 x USBs, Audio/Mic and E-Sata ports
- Smart Cable Management – Cable routing is pre-drilled on the MB so users can
hide cables behind the MB tray.
- Dust Protection - Includes front, bottom and top "Dust Filter" to prevent dust
entering your computer
- Mesh PCI cover - Includes Red metal mesh PCI covers for better ventilation
- RED LED fan controller - 3 "Mode" (Low, Medium and High) RED LED fan
controller is included to control up to 20 Watts of power.
- Bottom PSU position - the bottom PSU location enables PSUs to suck in cold
air and provides better air flow for your system.
- Water-cooling Support - water-cooling holes are pre-drilled to support
water-cooling systems!!
Features
- High performance "Mid-Tower" for gamers and enthusiast
Chassis Dimensions
Material
Motherboards
5.25" bay (External)
3.25" bay (External)
3 x 3.5” HDDs
Expansion Slots
Max length space available for PCI slots
I / O Ports
:
:
:
:
:
:
:
:
:
Cooling System
Fan
Rated voltage
Starting voltage
Power consumption
Rated current
Speed
Air Flow (CFM)
Air pressure
Noise (dBA)
Bearing
:
:
:
:
:
:
:
:
:
:
443(H) x 200(W) x 476(D)
SECC 0.6mm
ATX / Micro ATX
9 x 5.25" (External)
1 x 3.5" (Convert from 5.25”)
3 x 3.5” HDDs (Internal)(w/adaptors)
7 Slots
295 mm
2 x USB2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
Front
Rear
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.64W
0.22A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.64W
0.22A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
Specifications
Spec
Superb Airflow - install up to
2. Back - 1 x 12cm fan (1 x 12cm RED LED fan included)
6 x 12/14 cm fans !!!
3. Side - 2 x 12/14cm fans (optional)
4. Top - 2 x 12/14cm fans (optional)
Air Flow
1. Front - 1 x 12cm fan (1 x 12cm RED LED fan included)
Inside
5.25” > 3.5” adaptor for FDD
Dual fans on top panel
to extract heat from chassis
295mm
Pre-drill pipe holes for
water cooling w/meshed PCI slot
Tool-free for 5.25” bay
Cables are neatly tugged
behind the chassis
Provide easy access to
CPU cooler’s back plate
295mm
Filter included to prevent
dust from entering PSU
Sufficient depth of chassis for
installing long cards
Adaptors are equipped
with anti-vibration rings
HDDs can be mounted with
adaptors provided
Close Up
Reset
Low – 50% of max
speed
Medium – 80% of max
speed
High – full speed
Fan Control
Power