Transcript 投影片 1 - Aerocool

"Professional Series – Red label" : Super tower or Super
mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases
targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming
cases targeting at the extreme gamers. This Series offers
gamers with most functions, expandability and Extreme
cooling.
"Compact – Blue Label" : Small form factor case series
including cube cases, mini-ITX and Mini-Tower
(Micro-ATX).
PGS Introduction
"Value Series" : Best VALUE gaming cases with the
highest C/P Ratio (Cost to Performance ratio).
Case – the “Bx-500”
The Bx-500 is what every gamer dreams for. It is a sensational case which eludes
“Class” and “Performance”. The chassis is solidly constructed with 0.8mm SECC
Japanese Steel. The front panel is made by top quality aluminum and metal mesh. It
features “Breakthrough” features which are second to none.
What makes this case such a “Stand out” from its competitors is its performance, ease
of use and expandability. The Bx-500 supports E-ATX platform allowing for more
compatibility with high-end components such as Longer High-end VGA cards. Its airflow
is “un-rivaled”. It maximized airflow with 10 fans including front in-take 12cm LED fan
(included), back exhaust 12cm LED fan (included), dual top exhaust 14cm LED fans
(included) and bottom and side fans (option to install up to 5 x 12cm/14cm fans). There
is an additional option to install a 8cmfan on the right side panel to help cool your CPU.
The chassis is completely “Screw-less” which makes installation an ease. Smart
cable clips are also pre-installed inside the chassis to eliminate cable mess and
improve the system air flow. Both Power Supply and Hard Drive are well
protected from shock with anti-vibration rubbers.
What else can you ask for from this case?? Nothing!! It is an Ultimate gaming Case
which satisfied gamers and Enthusiasts around the world.
Design Concept
Aerocool, true to its gaming prow ace, proudly announced the Ultimate Gaming
Gallery
Front
Top
Back
Photos are for exterior
reference only. Not all fans
are inclusive.
Please see specification
page.
Side
Features
- High performance "Super Mid-Tower" case for gamers and enthusiast –
supports all High-End MB including Extended-ATX.
- Solidly constructed chassis – 0.8mm SECC Japanese Steel
- Beautifully finished front panel – the combination of aluminum and metal
mesh eludes “Class” and “Elegance”.
- High-end Graphic card Support - Supports longer high-end VGA cards
up to 380mm
- High Expandability – Supports 5 x 5 1/4” ODD devices, 1 x 3 1/2" device
and 5 x Hard Drives.
- HDD and PSU Protection - Includes anti-vibration rubber to protect your
HDDs and PSU from shock.
- Ease of Installation – Screw-less 5 1/4” bays, 3 1/2” bay, HDD trays and
PCI Slot make this chassis an easy install. The HDD cage is also rotated
90 degrees to help ease Hard Drive installation.
- Easy Access top I/O ports - 4 x USBs, Audio/Mic, 1394 and E-Sata ports
are located on the top panel for easy access.
- Smart Cable Management – “cable management clips” are pre-installed
inside the chassis to minimize your cable mess and improve the system
airflow.
- Smart Fan Management – As this chassis can support 10 fans, Aerocool
pre-installed 2 units of “fan adaptor PCB boards” inside the chassis to help
you
tidy your fan connections.
-Dust Protection - Includes front "Dust Filter" and bottom “Dust Filter” to
prevent dust entering your computer
- Un-rival Airflow - install up to 10 fans !!!
Chassis Dimensions
Material
Motherboards
5.25" bay (External)
3.25" bay (External)
Expansion Slots
Max length space available for PCI slots
I / O Ports
:
:
:
:
:
:
:
:
Cooling System
Fan
Rated voltage
Starting voltage
Power consumption
Rated current
Speed
Air Flow (CFM)
Air pressure
Noise (dBA)
Bearing
:
:
:
:
:
:
:
:
:
:
480(H) x 215(W) x 568(D)
SECC 0.8mm
Up to EEB
5
1(convert from 5.25" bay)
7 Slots
380 mm
4 x USB2.0 / 1394 / E-SATA / Mic & headphone (AC97 & HD audio) /
Reset button
Front
Rear
Top x 2
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.76W
0.23A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.76W
0.23A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
140 x 140 x 25mm
12V
≤ 9V(Power ON/OFF)
3.36W
0.28A
1500 RPM +- 10%
86.0 CFM (Max)
1.54mm H2O
23.13 dB-A
Sleeve
Specifications
Spec
3. Top – 2 x 14cm fan Orange LED fans (included)
4. Side (left panel) - 4 x 12cm or 14cm fans (optional)
1. Front - 1 x 12cm Orange LED fan (included)
5. Side (right panel) – 1 x 8cm fan to help cool your CPU (optional)
2. Back - 1 x 12cm Orange LED fan (included)
6.Bottom – 1 x 12cm or 14cm fan (optional)
Air Flow
Superb airflow - install up to 10 fans !!
Inside-1
Can install 1x80mm
(15mm thickness)to
cool CPU
Tool-free for 5.25” bay
Tool-Free for PCI slots
Exposed listing of screws
are easy to find
Added PCB provide extra fan
Connection and reduce cable mess
Added PCB provide extra fan
Connection and reduce cable mess
Squeeze and pull HDD
rack
Inside-2
Dual fans on top panel
to extract heat from
chassis
Cable clip to reduce
mess inside the chassis
Pre-drill pipe holes for
water cooling
Can install 1x14 fan
with fan filter
PSU anti-vibration pad
Sufficient depth of chasis
for installing long cards
Design Concept
Storage compartment
2x14cm fans extracts heat trapped
inside the chassis
Installing up to 4 fans for
unbeatable cooling performance
I/O port with lid
Constructed with aluminum rods and metal
meshed front bezel allows large air intake