Transcript Hardware Options, Specs and Features

Available Hardware
•
•
•
•
•
•
•
•
•
•
•
•
1
Qube 50
Qube 300
Qtanium 100
Qtanium 200
Qtanium 350
Qtanium 400
TM 470
TM 470R
MDT 860
MNav 950
Garmin 670
Garmin Nuvi 2539
•
•
•
•
•
•
•
Dallas Key (Key Fob)
Con-Ex
Satellite
CDMA
TAT – Trailer Asset Tracking
PTO
Jbus & OBDII
Qube 50
Self-Install option for Track and Trace Customers
• The Qube 50 is a fully-featured GPS tracking device that interfaces with
and is powered by the vehicle's OBDII port.
• Installation is as simple as inserting the device into the OBDII connector.
Features:
•
•
•
•
•
•
•
2
Has internal GPS and Cellular Antenna
3-axis accelerometer collects data on:
o GPS location
o Vehicle speed
o Harsh braking, cornering and acceleration
Designed for light duty vehicles
Basic driving behavior information
Up to 25 Active Sites with up to 50 vertices per Site
Tow Away alert
Internal Battery provides last gasp tamper event if the
device is unplugged
Qube 300
On-Road Tracking Device
• Designed for on road use. Basic track and trace with the ability to do some
safety metrics via accelerometer.
Features:
• Supports MNav 800 & 950 and Iridium Satellite modems
• Supports up to 8 conex’s - 4 digital inputs, 2 digital outputs and 2 multi I/O
• Supports 1 – wire for temperature monitoring
• 600 active sites
• Accelerometer
• Back-up battery
• Tamper cover
• Includes power harness
3
TM 470
On-Road Tracking Device
• Designed for on road use. Basic track and trace with the ability to do some safety
metrics via accelerometer.
Features:
• The TM470 contains a GPS receiver and
cellular modem
• Supports 2 digital inputs and 2 digital
outputs
• Version 8 variants of the TM470 contain
a Pic processor which can be used to
directly interface with vehicle J-Bus
systems in order to collect information
about vehicle behaviour and
performance from its on-board computer.
TRAILER AND ASSET
TRACKING
5 TELETRAC NAVMAN, INTERNAL 2016
Qtanium 100
Non-powered Asset Tracking Device
• Self-powered tracker designed for unpowered assets and trailers with basic
location only settings at set time intervals throughout a day.
Features:
•
Self powered
•
Store up to 10 active sites
•
Replaceable Lithium ion battery
•
Updates location only at set time intervals
•
IP 67 Rated
•
Installation is easy – bolt or magnet mounted
•
Device sends an alert when the battery is low
•
Sends location update information periodically
•
Once a day – 7 year battery life
•
Every 2 hours – 3 year batter life
•
Every 4 hours – 18 month batter life
Qtanium 200
Powered Asset Tracking Device
• The Qtanium 200 will be Teletrac Navman’s latest asset tracking device based
on CalAmp’s TTU 2830. The QT200 has a broad range of usage from trailer to
asset tracking for Resources, Mining and Construction markets.
• Specifically designed to locate, manage and recover
company equipment.
• In-motion visibility of trailer and asset positioning with
updates times that are configurable.
• The ability to set up Active Site alerts and notifications
to automate status reporting. Director notifies users
when a trailer unit has arrived at a customer site.
• Powerful charge power. When the product is hooked
to a tractor unit, its internal battery starts charging—
meaning the next time the tractor is un-hooked, it
continues reporting its position without the need for
external power.
Qtanium 200
Features:
• Waterproof
• 3-axis precision accelerometer for motion detection
• 4 power states for battery conservation (Hibernate, Asleep, Low Power
and Fully Active)
• 6 month with single message cycle per day on fully charged battery
• 2 inputs / 2 Outputs
• 20,000 buffered messages
• 100 built-in Active Sites (and 5400 vertices for polygon zones)
• Over-the-air configuration and firmware updates
• GPRS, CDMA 1xRTT and HSPA
Choosing the Correct Equipment
Use the table below to determine the best asset tracking
option for your customers
Application/Equipment Power Connection Preferred
Type
Unit Type
48 /53 foot Standard Box/
7 way Power
QT200
Dry Van Trailer
connection
48/53 Standard
7 way Power
QT200
Reefer/Refrigerated
connection or
trailers
Reefer battery
48/53 Standard Flatbed/
7 way Power
QT200
Lowboy Trailers
connection
Gooseneck Trailer
5 Way Power
QT100
connection
Small Utility Box Trailers
5 Way Power
QT100
connection
Application
Pulled by a Semi Truck rarely sits at one location for more
than 10 days at a time
Pulled by a Semi Truck rarely sits at one location for more
than 10 days at a time
Pulled by a Semi Truck rarely sits at one location for more
than 10 days at a time
Usually used to pull equipment can sit for more than 10
day up to weeks at a time, pulled by a pickup truck
Usually used to pull equipment can sit for more than 10
day up to weeks at a time, pulled by a pickup truck
HEAVY EQUIPMENT
PRISM UNITS
11 TELETRAC NAVMAN, INTERNAL 2016
Qtanium 350
Off-Road Tracking Device
•
Designed for all makes and models of off road equipment. Basic track and trace.
Features:
• Supports MNav 800 & 950 and
Iridium Satellite modems
• Supports up to 8 conex’s - 6 digital
inputs and 2 multi I/O
• 600 active sites
• Back-up battery
• IP 67 Rated
• Shock testing to 30G and vibration
testing to 9G
• Includes power harness
Qtanium 400
Off-Road Tracking Device
•
Designed for all makes and models of off road equipment. Next Generation OffRoad Tracking device. Replacing Qtanium 350.
Qtanium 400
Off-Road Tracking Device
Features:
•
Supports MNav 800 & 950
•
Supports up to 8 conex’s - 4 digital inputs, 2 digital outputs and 2 “multi” – digital
in/out/analogue inputs
•
3 Communication variants: Base (cellular), Base + (internal) Wi-Fi, Base +
Satellite (internal)
•
2 Network Variant: HSPA & CDMA
•
Built in Isolating Power Supply, isolation between chassis and the negative supply
terminal
•
600 active sites
•
Up to 3 months operation from internal battery
•
IP 67 rated and exceeds SAE J1455 shock and vibration standard
•
Shock testing to 30G and vibration testing to 9G
TM470R
Off-Road Tracking Device
•
Designed for all makes and models of off road equipment. Basic track and trace.
Features:
• Supports up to 6 conex’s – 2
Analog inputs, 1 analog output, 118 micro, 1-DB-9 RS232 Serial Port
and 1-DB15 1708/21939 J-Bus
• 32 active sites
• IP 66 Rated
MDT 860
Communication Device
• Used to streamline and automate a variety of tasks currently accomplished
through manual means. Can be used on on/off road vehicles and equipment.
Features:
• 2 way communication (no navigation)
• Send status updates
• Virtual time clock “punching in and out”
• Dispatch vehicles
• Track in vehicle inventory
• Track fuel use/take-in
• User can set preset messages/forms
• Driver pin
MNav 950
Navigation Device
• Navigator with the addition of Navman Wireless Drive that provides messaging, forms,
EMS and Driver ID. Optimized for heavy transport operation and to route large vehicles
or those with hazardous cargo. Can be used with on/off road vehicles.
MNav 950
Navigation Device
Features:
• Affordable two-way messaging
• Status or free text messaging
• Customer-selected preset replies
• PC-based message dispatch software
• Driver pin
• 6” Touchscreen
• Reliable and easy installation
• Efficient communication with one or all fleet members at once
• Signature capture
• Bluetooth capability
Garmin 670
Navigation Device
• Navigator with the addition of Teletrac Driver’s app that provides messaging, forms and
HOS. Optimized for heavy transport operation and to route large vehicles or those with
hazardous cargo. Can be used with on/off road vehicles.
Garmin 670
Navigation Device
Features:
• Affordable two-way messaging
• Status or free text messaging
• Customer-selected preset replies
• PC-based message dispatch software
• 6” Touchscreen
• Reliable and easy installation
• Efficient communication with one or all fleet members at once
• Bluetooth capability
Garmin Nuvi 2539
Navigation Device
• Navigator with the addition of Teletrac Driver’s app that provides messaging and
navigation. Optimized for heavy transport operation and to route large vehicles or those
with hazardous cargo. Can be used with on/off road vehicles.
Garmin Nuvi 2539
Navigation Device
Features:
• Messaging and navigation
• Affordable two-way messaging
• Status or free text messaging
• Customer-selected preset replies
• PC-based message dispatch software
• 5” Touchscreen
• Reliable and easy installation
• Removable
• Efficient communication with one or all fleet members at once
Dallas Key (Key Fob)
Driver ID Device
• Simple magnetic tap device used to identify driver/operator to on/off road
vehicle/equipment.
Features:
• Driver ID device
• RFID
Conex
Sensor Device
• Used to connect to 3rd party sensors for activity tracking. Such as, door
open/closed, oil pressure switches or any sensor with an electrical output.
Features:
• Supports inputs and outputs for on
road vehicles and RS 232 inputs
• Used to measure Power Take Off
(PTO)
Power Take Off (PTO)
Features:
• Power Takeoff (PTO) is a device that transfers power from the engine to
another hydraulic accessory.
• Any device on a vehicle that can be turned on or off, such as a hydraulic
cylinder on a tow truck, garbage truck, lift gate, hydraulic pump, bucket on a
back hoe, etc.
Satellite
Satellite Device
• Designed primarily for construction, foresting, mining and oil & gas industries in
remote areas. Can be used with either Qube or Qtanium.
Features:
• Used in remote areas with
little to no cell coverage
• Switches automatically to
satellite when no cell coverage
detected
• Uninterrupted real-time
tracking
• Can be configured to limit satellite transmissions to priority events (such as
panic messages, rollover alerts, engine overheating, speed or geofence
violations) until cellular coverage is restored.
Vehicle Diagnostics
Jbus & OBDII
• Provides essential vehicle health, fuel consumption and emissions data even
before the driver knows what’s going on through the vehicle’s ECM (Electronic
Control Module) via a J-Bus or OBDII cable.
Features:
• Allows fleet managers to safeguard the safety
and longevity of their vehicles.
• Produces diagnostic reports enabling proactive
maintenance, increasing company productivity,
efficiency and performance.
• Over the road vehicles, semi-trucks or big rig
vehicles will require a J-bus connection.
J-Bus
OBD II
Edition
Hardware Software Platform
Essential
Professional
Qube 50
TM470
Director
Director
Professional
Qube 300
Director
Professional + Driver ID
Qube 300
Director
Professional + Diagnostics
TM470
Director
Professional + HOS
TM470
Fleet Director
Professional + HEV
Professional + Trailer
Professional + Trailer
Professional + LEV
QT 350
QT 100
QT 200
QT 200
Director
Director
Director
Director
28 TELETRAC NAVMAN, INTERNAL 2016
VLU Type
Hardware Compatibility
Peripheral Type and Extras
CTO5
Samsung w/ TT Drive App
TM470
Garmin 670 w/ TT Drive App
Garmin Nuvi 2539
TM470R
Qube 300
Qtanium 350
Qtanium 400
29 TELETRAC NAVMAN, INTERNAL 2016
N/A
MNAV 800 w/ HOS
MNAV 950 w/o HOS
MDT 860
Dallas Key (Key fob)
Satellite
VPOD
MNAV 800 w/ HOS
MNAV 950 w/o HOS
MDT 860
Dallas Key (Key fob)
Satellite
VPOD
MNAV 800 w/ HOS
MNAV 950 w/o HOS
MDT 860
Dallas Key (Key fob)
Satellite
VPOD
QUESTIONS?
If you have any questions in regards to the new
software or features, please contact .Ops Training.
30 PRESENTATION NOTE, IF NECESSARY
Qube 300 Specs
Physical
• Weight: 320 g
• Packed Weight (Gift Box): 600 g
• Case Material: Bayer KU2 1514
• ABS/Polycarbonate blend
• Tamper Cover: Polycarbonate
Current Consumption at 13.8 V (27.6 V)
• Sleep State: <3 mA @ 12 V DC
• Awake, modem ON: 70 mA (35 mA)
• Awake, average transmit event once
• every one minute: 120 mA (60 mA)
• Peak transmit current: 250 mA (130 mA)
• Battery charging: additional 150 mA (80mA)
Power Supply
• Nominal operating voltage: 12 or 24 V
vehicle supplies
• Minimum operating voltage: 8 V DC
• Maximum operating voltage: 30 V DC
Digital Output
• Maximum sink current 250 mA (over current
protection/shut-off)
Temperature Monitoring
• Maximum of six Navman Wireless digital
temperature probes
• Maximum 30 m cable length per installation
Digital Inputs
• Input Voltage LOW: <1.0 V (Active High mode)
• Input Voltage HIGH: >5.0 V (Active High mode)
• Input Voltage LOW: <0.2 V (Active Low mode)
• Input Voltage HIGH: >0.5 V or not connected (Active Low
mode)
• Absolute Maximum Voltage: 33 V (Independent of supply)
Analogue Input
• Voltage Range: 0-33 V DC
• ADC Resolution: 12 bit
• Absolute Maximum Voltage: 40 V DC
Serial Interface
• RS232 x 3
Environmental
• Storage Temperature: -40 to +85°C (-40to +185°F)
• Operational Temperature: -20 to +70C(-4 to +158°F)
• IP Rating: IP4X
• Humidity: SAE J1455
• Vibration: SAE J1455
• Shock: 20G 10mS
Ignition Input
• Absolute Maximum Voltage: 33 V (independent of supply)
Qtanium 350 Specs
Physical
- Weight: 3.26 lbs (1.48 kg)
- Packed weight (Box): 4.18 lbs (1.90 kg)
- Case material: Extruded aluminium
- End caps: Die cast aluminium
Power Supply
- Nominal operating voltage: 12 or 24 V asset supplies
- Minimum operating voltage: 9 V
- Maximum operating voltage: 30 V
Current Consumption at 13.8 V (27.6 V)
- Sleep State: <1 mA (<3 mA)
- Awake, modem ON: 50 mA (25 mA)
- Awake, average transmit event once every minute:
100 mA (50 mA)
- Peak transmit current: 200 mA (100 mA)
- Battery charging: additional 170 mA (90 mA)
Digital Inputs
- Input voltage LOW: <1.0 V when configured Active
High
- Input voltage LOW: <0.2 V or Grounded when
configured Active Low
- Input voltage HIGH: >5.0 V when configured Active
High
- Input voltage HIGH: >0.5 V or not connected when
configured Active Low
- Absolute maximum voltage: 30 V (independent of
supply)
Digital Output
- Maximum sink current 250 mA (over current
protection / shut-off)
Analogue Input
- Voltage range: 0 to 33 V DC
- ADC resolution: 12 bit
- Absolute Maximum Voltage: 40 V (independent of
supply)
I/O
- 4 x digital Inputs
- 2 x Digital Outputs
- 2 x Multi I/O (can be configured as Digital Inputs,
Digital Output, or Analogue Input)
- 3 x serial ports
- 1 x 1-wire port
EMC Compliance
- EN 301 489-7 V1.3.1 (2002-08)
- EN 301489-19 V1.2.1 2002
- AS/NZS CISPR 22.2006
- AS/ANZ 60950. 1:2003 Amdt 1:2006 Amdt 2:2008
Amdt 3:2008
- ISO 7637-3:1995, ISO 7637-2:2004,
ISO11452:2004, ISO 11452-4:2005
- FCC: Part 15 class A & B
Environmental
- Storage Temperature: -40 to +185°F (-40 to +85°C)
- Operational Temperature: -4 to +158°F (-20 to
+70°C). Note battery charging limited to 0 to +45°C
- IP Rating: IP-67
- Humidity: SAE J1455
- Vibration: SAE J1455
- Shock: 20G 11mS
Ignition Input
- Absolute Maximum Voltage: 30 V (independent of
supply)
MNav 950 Specs
Garmin 670 Specs
TM470R Specs
Qtanium 200 and TAT Specs