Transcript IEM Corporate Presentation Template – Oct 2009

IEM Industrial Electrical Mfg. (Canada) Inc.
IEM Canada is a subsidiary of IEM US who is North America’s
largest independent full-line manufacturer of electrical
distribution and power quality equipment.
Tradition. Technology. Innovation.
TRADITION. TECHNOLOGY. INNOVATION.
IEM began business in a barn on
a family ranch in Fremont, CA.
Original team in 1950
The Barn – Original plant in 1950
2
TRADITION. TECHNOLOGY. INNOVATION.
IEM grew along with Silicon Valley, moving to a 12,000 sq ft facility in 1957,
expanding to 70,000 sq ft in 1980 and to 105,000 sq ft in 2003 with offices on
the East Coast and Western Canada.
3
TRADITION. TECHNOLOGY. INNOVATION.
IEM has been solving power
distribution challenges for HP,
Apple, and dozens of
prominent companies since
they were start-ups.
A dedicated research division
in Canada keeps IEM at the
forefront of electrical
distribution development.
New LV Switchboard installation for AT&T – Hayward, CA
4
TRADITION. TECHNOLOGY. INNOVATION.
IEM pioneered the use of fully integrated CAD and manufacturing
systems, beginning in 1979 with the first CAD/CAM system for
electrical equipment metal fabrication.
5
TRADITION. TECHNOLOGY. INNOVATION.
IEM developed the medium voltage vacuum
breaker in the 1980’s, pioneered the use of
breakers on 21kV systems, and was the first
to design a 3000A free standing breaker
for utilities.
6
TRADITION. TECHNOLOGY. INNOVATION.
At IEM today, tradition and
technology still drive
innovation.
Products like state-of-the-art
paralleling switchgear and
medium voltage fully frontaccessible arc resistant
switchgear are the results of
this process.
7
IEM’s Unique Parallel Manufacturing System
IEM’s unique parallel manufacturing system allows complete flexibility and modification at any
stage of the manufacturing process. This IEM Difference results in shorter manufacturing cycles,
increased flexibility after start of production, and easy integration of special designs.
8
IEM’s Unique Parallel Manufacturing System
•
•
•
•
•
Several manufacturing elements staged simultaneously
All fabrication and finish in one location
Parts produced at any point after design
Redundant operations for powder coat
Results in:
• Shorter manufacturing cycles
• More flexibility after manufacturing starts
• Easy integration of special designs
9
IEM Positioning
10
IEM Electrical Single Line Product Scope
11
IEM Product Scope
• Utility/Unit Substations
• Transformers
• Arc Resistant Switchgear
• Low Voltage Switchgear
• Medium Voltage Switchgear
• Paralleling Switchgear
• PLC based Control Systems
• IEM Generator Controllers
• Panel boards & CDPs
• Custom Walk-in Assemblies
• 12/24VDC Battery Chargers
12
Distribution and Lighting Panelboards
• Flexibility to integrate a wide range of
components including surge suppression
equipment, custom metering, receptacles,
and more
• Up to 84 circuits in one panel
• Vertically mounted main and sub-feed
circuit breakers
• Single phase and three phase
• Complete line of UL Listed interiors with
200% rated neutrals for non-linear loads
13
Switchboards Exceeding Industry Standards
• Devices can be individually (vertically)
or group (panel/horizontally) mounted
• Custom sheet metal and bus flexibility
for busway and transformer
connections
• Rigid frame construction isolating bus
and breaker assemblies from
enclosure
14
Switchboards Exceeding Industry Standards
• Options include automatic
transfer switches, TVSS,
distribution transformers, and
PLC or relay based transfer
schemes
• Voltage ranges 120V to 600V
Ampacity 400A to 6000A
15
Low Voltage Switchgear
• Industry leading power circuit
breakers
• Indoor, outdoor non walk-in and
outdoor walk-in enclosures
• Extensive variety of durable color
finishes, using state-of-the-art
electrostatic powdercoat paint process
• Power circuit breakers can be
mounted in a fixed or draw-out
configuration
• Voltage ranges 240V to 600V;
Ampacity 800A to 6000A
16
New MV Metal-Clad Switchgear
(Front Connected)
•
•
•
•
•
•
•
•
•
IEM VESTA-AR Switchgear
Rated Voltage: 5-15kV
Current: 600-1200A
VM-1 circuit breaker technology –
ABB
Full front accessibility
Smallest footprint on the market
(24” x 96” x 60”)
Monoblock capacity for 2 sets
CT’s on line & load
Arc-resistant option available
UL Listed, Arc Resistance
ANSI/IEEE 37.20.7 and IEC
62271
17
Medium Voltage Switchgear
Available in 5, 15, and 27 kV
18
MV Metal-Clad Switchgear
(Circuit Breaker Assemblies)
• Voltage 2400V to 27kV
• Ampacity 600A to 3000A
• Available vacuum circuit
breakers with optional choice
of manufacturers
• Rear access for load and
incoming connections
• Compartmentalized
construction with breaker
compartment for each device
• Unit substation primaries
• Indoor or outdoor non walk-in
and outdoor walk-in
enclosures
19
MV Metal-Enclosed Switchgear
(Fusible Load Interrupters)
• Voltage 2400V to 27kV
• Ampacity 600A to 3000A
• Rear access for load and
incoming connections
• Compartmentalized construction
• Unit substation primaries
• Indoor or outdoor non walk-in
and outdoor walk-in enclosures
20
Unit Substations
• Converts distribution voltages to
utilization voltages in any
configuration up to 27kV
• Maximum flexibility with wide range
of components and ratings
• Indoor or outdoor
assemblies/construction
• Primary disconnect switch or circuit
breaker up to 27kV
• Configures to any transformer
manufacturer available
21
Paralleling Switchgear
• Integrates protection, metering,
control and switching
• Allows maximum flexibility
resulting in reduced energy
costs, operational reliability,
and uninterruptible maintenance
• Unlimited Design Options
and Features
• Load priority control
• Generator priority control
• Custom Operator Interface
screens
• Remote communications
• Utility paralleling
22
Custom Assemblies
Custom Distribution Centers
enable the integration of
components or products
tailored to address a variety
of unique system needs
• Walk in enclosures
• Shore Power Switchgear
• Emergency Fused
Coordination Panels
• Generator Cable
Tap Boxes
23
Switchgear Technical Specifications
IEM equipment passes stringent earthquake survival testing by the
Southwest Research Institute and is fully qualified to worst-case
response spectrum
• Meets or exceeds ANSI, IEEE, NEMA standards
• Listed to appropriate UL and CSA standards
• Tested to short time rating for 30 cycles (0.5secs)
• Tested to short circuit rating for 4 cycles (0.67secs)
• High density fully rated bus
24
All IEM Equipment Is Seismic Qualified
IEM Low Voltage Switchgear,
PIU Panels, and PIE Panels
passed stringent earthquake
survival testing by the
Southwest Research Institute
25
Fully Rated Bus
Superior Bussing
• Fully rated based on density not
temp rating
• 1000A/in2 for copper
• 750A/in2 for aluminum
• In-house forming, bending and
punching
26
Superior Enclosures
• Each designed for a specific
application
• Rigid and square enclosure,
limits distortion
• Dimension flexibility
• Aluminum, stainless,
galvanized steel
• Custom powder coating
paint finish
27
Metal Finishing Process Extends Product Life
• State of the art powder coat finishing system
• 5-Stage washer improves salt spray
resistance to 3000hrs; exceeds industry
requirement
• System is self-contained with no discharge
of waste water
28
IEM Canada Specializes in Paralleling
Switchgear and Control System Design
IEM Canada was formed in 2007 as the new
Canadian Sales, Service/Parts and local
Manufacturing Center for IEM US.
As an extension of the parent company, IEM
Canada specializes in the design engineering
and development of paralleling switchgear,
protection and controls while offering all of
IEM’s proven products and services.
IEM Switchgear was recently installed at
Canada Place, Vancouver , Eagle Ridge
Hospital in Port Moody, B.C. and other cities
across Canada
29
IEM Receives ISO 9001:2008 Certification for
its Quality Management System
30
IEM Canada 24/7 Emergency Service
To access IEM Canada 24/7 Emergency Services
• Please call (778) 373-9601
• To Email [email protected]
31
Committed to Green
• IEM is committed to maximize the use and
minimize waste of our precious natural
resources. Conditioning and distributing
electrical energy efficiently while minimizing
loss.
• Energy savings, waste reduction, recycling,
water conservation, pollution prevention – all
of these factors along with our unique ability
to deliver innovative power solutions to an
energy hungry world – enable IEM to make a
sustainable difference.
32
The IEM Difference
• Proven track record, responsive,
experienced staff
• Flexible, comprehensive
solutions
• Leading-edge CAD software and
tech support
• Components sourced from
leading manufacturers
• Testing that exceeds industry
standards
33
IEM Delivers
For over 50 years, IEM has
been delivering best-in-class
electrical distribution systems
for industries across the U.S.
and Canada.
We’d like to apply this
expertise to your power
distribution challenge.
34