Transcript orion stepper motor drive - Stepper Motor Drive, Microstepping Drive

automation technology within reach
Welcome to the world of
innovative, appropriate and economic
Machine automation solutions
Using Stepper Motors
The choice….
Stepper Motors
are the system designer’s choice for
economic and reliable open loop systems
ORION drives is their choice for
getting exactly what they need
Stepper Motors
are unique in these features




Instant start / stop up to at least 60 RPM.
Instant reversal up to at least 60 RPM.
No effect of voltage fluctuation on speed.
Can provide holding torque in stopped
condition.
ORION drives further accentuate
the advantages






Speeds up to 2000 RPM (or more) possible
within specific framework of application.
Current chopping techniques.
State of the art devices.
Power efficient design.
Versatile interface to suit different
controllers.
Various models to suit your need
THE NAME
ORION ELECTRONICS
IS SYNONYMOUS WITH
Rugged design
Excellent workmanship
Application support
Service back up
State of art technology
Co-creation for systems
Let’s first have
a close look
at the
different models,
we offer….
Integral Motor-Drive, IMD-2A
Expected NEW arrival





Drive mounted on the back of motor
Configurable for single or dual power
supply
Space saving arrangement
Currents up to 2 Amps
Sourcing or sinking signals from controller
MODEL NO BPD-3A3-S
Compact size : 140 X 80 X 50 mm
Option of Dinrail mountable drive
Configurable for single or dual power supply
(24 V single OR 36 V & 12 V dual)
Can be interfaced with sourcing OR sinking signals
from controller
Current settable up to 3.3 Amp / phase
50% automatic current reduction in
stand by mode
BPD-3A3-S+
Mounted on 140 X 80 open chassis
 Application specific useful functional
add-on capability (Like analog input
for speed, limit switches, home
position etc.)
 Ideal for machine panels

STEPPER MOTOR DRIVE
Model No BPD-3A3-C OR BPD-3A3-E

Size : 192 X 96 X 200 mm

Works on 230 VAC mains
INTERNAL mode for testing OR
manual operation (in BPD-3A3-C only)

Can be interfaced with
Sourcing or sinking signals from controller


Current settable up to 3.3 Amp / phase
Model No. BPD-3A3+
Customized fixed add-on functions
with limited variations
 Desired sensor logics, delays, outputs
 Size same as BPD-3A3-C
 Extremely useful for economic SPM’s

TUBE ORIENTATION DRIVE







Model No. OD-3A3
Start by sensor (NPN or PNP)
Stop by sensor (NPN or PNP)
Relay or solid state output on every stop
Alternative stop in case of stop sensor failure
Motor current up to 3.3 Amp
Size : 192 X 96 X 200 mm
Microstepping Drives
Model No MSD-3A-64 (08, 16, 32, 64)
 1600 to 12,800 steps per revolution,
i.e. 0.225 to 0.028 degrees / step
 Current settable up to 3 Amp
 Extremely useful in precise applications
 No resonance problem, smooth motion
 Size : 192 X 96 X 300 mm
Ministepping Drives
Model No MSD-3A-08
 1600 steps per revolution,
i.e. 0.225 degrees / step
 Current settable up to 3 Amp
 Extremely useful in precise applications
 No resonance problem, smooth motion
 Size : 192 X 96 X 200 mm
Model No BPD-6A-S
Size : 290 X 150 X 115
Cooling fan on top of the drive box
170 X 130 X 125 mm
for transformer box
Works on 230 VAC mains
Current settable up to 6.5 Amp / phase
Can be interfaced with
sourcing OR sinking signals from controller
Model No BPD-6A+
Accepts digital signals from controller
Start (Run), Direction & Slow down
generates clock internally
 Provides clock-out pulses to controller
 Three or more externally controlled
Speeds possible on request
 Most useful in PLC controlled panels
 Housing same as model no. BPD-6A-S

BPD-9A-S
Size : 300 X 177 X 135 mm
For drive box
170 X 130 X 125 mm
for transformer box
Drives high torque motors at high speed
Works on 230 VAC mains
Current settable up to 10 Amp / phase
Can be interfaced with sourcing OR sinking
signals from controller
Provision for sensing fault condition
Model No BPD-9A+
Accepts digital signals from controller
Start (Run), Direction & Slow down
generates clock internally
 Provides clock-out pulses to controller
 Three or more externally controlled
Speeds possible on request
 Most useful in PLC controlled panels
 Housing same as model no. BPD-9A-S

But….
Good drives are of little use
if not supported by proper controllers
Think of an application….
And there we are, with a solution.
Applications








Plastic Bag Making Machine
Tube Filling and Sealing Machines
Linear OR Rotary Indexing Tables
Label Making Machines
Label Applicators
2 or 3 axes Engraving Machines
Wire Cutting / Stripping Machines
Machine tools
And the list is ever increasing…
Cut-to-Length Controller
(Bag making, Label making, indexing etc.)
On site programming of machine parameters
18 keys membrane keypad
Two sensor inputs
Three relay outputs
20 X 4 LCD display
Error alarm
Batch setting
Choose combination of these
functional variations for your
customized solution….






Sensor start, Sensor stop
Sensor Start, Slow / Stop on traverse
Speed control by analog input
Homing, Limit switch reversal or stoppage
Sequence of different traverses
Two or 3 Axes interpolation
Go Ahead,
Choose a model
and
make your application, a
SUCCESS
Your Application
If you have an application and need a
solution, kindly explain the functional
sequence in detail.
And there we are to give you a solution.
Details Right click and open hyperlink
Partial user list
Godrej
 Glaxo
 Gabriel
 Colgate
 B.A.R.C.
 I.I.T.
 T.I.F.R.
And many more….

Contact us



Visit www.orionele.com
E-mail : [email protected], [email protected]
Visit our customer interaction center at
4041, Bhandup Industrial Estate,
L.B.S.Marg, Bhandup (West)
MUMBAI : 400 078

Tel : 022 – 2596 1671 (Telefax), 022 – 2596 3478

Tel : (Works) : 0253 – 238 7989