Transcript Slide 1
EMIT SIM
Rev: 2012-01
Made in
United States of America
DescoEMIT.com
EMIT SIM
What is EMIT SIM?
EMIT SIM (Smart Ionization & Monitoring) is software designed to monitor and record the
activity of EMIT’s line of Smart Products
This list of products includes:
Zero Volt Ionizer
Zero Volt Monitor
Zero Volt Monitor Solo
Dual Programmable Monitor
Ultra Low Voltage Monitor
(Bench Top and Overhead)
(Dual Operator and Workstation)
(Single Operator and Workstation)
EMIT SIM uses serial number tracking to manage re-calibration schedules for each device
All monitoring is done via a 2 wire serial RS-485 daisy-chained bus. Total cable length of
each loop must be less than 1,200 meters (~4,000 feet).
Supported Operating Systems: Windows XP, Windows Vista, Windows 7
(32-bit and 64-bit)
Made in
United States of America
DescoEMIT.com
EMIT SIM
Why EMIT SIM?
Unsupervised Reliability
Ionizers and monitors sometimes have alarms which may go unnoticed by the line of
workers
EMIT SIM will record and display failures to notify supervisors or engineers when a device
needs attention
Eliminates the need to rely on people to physically check the devices every day
Quickly Identify Failure Types
All alarms and exceptions are automatically recorded
Use the logs stored in EMIT SIM to identify any exceptional events that occurred during the
assembly of a failed product
Manage Calibration and Maintenance Schedules
Customize your maintenance schedule to automatically display notification when
any one group of devices need calibration or maintenance
“Compliance verification records shall be established and maintained to provide evidence of conformity to
the technical requirements.” (ANSI/ESD S20.20-2007 section 7.3)
Made in
United States of America
DescoEMIT.com
EMIT SIM
Poll and Record Device Activity
EMIT SIM polls and
records the status
of all EMIT smart
devices via RS-485
technology
Use the “Current
Fault” filter to
display when
failures occur at a
workstation
Track the device
type, its operator
and location, type
of failure, date,
time and duration
Made in
United States of America
DescoEMIT.com
EMIT SIM
Click the device buttons to
see device-specific poll
data
Device poll screens display
the current status of the
selected device type
(PASS, FAIL, NOT
CONNECTED)
Made in
United States of America
DescoEMIT.com
EMIT SIM
Report Generator
Generate reports that list device details and their pass / fail activity
Filter reports by device type, date range and ‘fault only’ data
Reports display event duration, allowing users to quickly identify and address problem areas
Reports can be output in Excel, Word, and PDF formats
Made in
United States of America
DescoEMIT.com
EMIT SIM
Data Archive
Manually or automatically archive data
Auto Archive your data by date or file size
Schedule archives daily, weekly or monthly
Made in
United States of America
DescoEMIT.com
EMIT SIM
Calibration Schedule Management
Use the Calibration Log to manage device serial numbers and their calibration dates
EMIT SIM periodically checks all calibration dates to determine if the device is due for re-calibration
Set calibration frequency settings for each device type (1 -12 months)
EMIT SIM will send an e-mail and display an alert when a device is due for calibration
Made in
United States of America
DescoEMIT.com
EMIT SIM
Calibration E-mail Alerts
EMIT SIM contains an E-mail
Alert feature tied into its
calibration tracking module
Automated e-mail alerts are
sent to a predefined list of
supervisors when a device is
due for calibration
Made in
United States of America
DescoEMIT.com
EMIT SIM
Hardware Setup – ZVM Solos Only
Made in
United States of America
DescoEMIT.com
EMIT SIM
Hardware Setup – Ionizers Only
Made in
United States of America
DescoEMIT.com
EMIT SIM
Hardware Setup – Monitors and Ionizers
Made in
United States of America
DescoEMIT.com
EMIT SIM
Need More Information?
For a demonstration contact EMIT
for your local sales representative
DescoEMIT.com or 909-664-9980
Made in
United States of America
DescoEMIT.com