Transcript Nokia 30/31 technical specification

Nokia 30 technical specification
1
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• Introduction:
• Nokia 30 GSM is the Nokia GSM
Connectivity Terminal over GSM
900/GSM 1800 networks.
• They includes:
• GSM transceiver with built-in data
capabilities
• SIM card reader
• An internal antenna
• An external antenna connector
• An M2M system connector
• D9 connector is available with an
additional data adapter
2
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• Introduction:
• The terminal functionality is controlled by the
customer application (server or remote) using
SMS, AT commands or Corba messages.
• The terminal can be plugged into remote
customer application with the 50-pin M2M
system connector or with 9-pin D connector by
using RS232 adapter (accessory).
3
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• User control mode:
• User control mode enables simple applications
to be controlled by mobile handsets with text
messages (SMS). The control is through
general purpose inputs and outputs of the
terminal.
• There are three inputs and five outputs on the
M2M system connector. The inputs can be used
in either digital or analog mode. The outputs
can be used in digital mode only.
• Control devices
• Switch devices on or off.
• Monitor devices
• Receive alarm calls if a device has been
switched on or off
4
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• AT command mode:
• In AT command mode the terminal acts as a
normal cellular modem using AT commands. It
can be connected to the PC or a compatible
device.
• The AT commands are availabe with RS232
adapter or M2M system connector.
• The terminal works with standard modem
drivers or with terminal modem driver.
• Normal communication applications can be
used:
• For example: E-mail, Fax, WWW
5
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• M2M system mode:
• The M2M System Mode offers an effective
serial interface for controlling the Nokia 30
terminal. The objective is to provide networktransparent programming through a vendor,
operating system and language-independent
CORBA architecture.
• M2M system mode offers an effective and
reliable protocol, namely the M2M system
protocol, for controlling the terminal via M2M
System Connector.
• The connection between the Nokia 30 GSM
Connectivity Terminal and the customer
application is checked periodically.
6
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
Features:
Nokia 30
GSM network:
GPRS multi-slot class:
GPRS mobile station class:
CSD:
Messaging services:
Supplementary services:
Remote I/O control:
Realibility & access control:
HSCSD multi-slot class:
7
© NOKIA
FILENAMs.PPT/ DATE / NN
EGSM 900 / GSM 1800 MHz
Class 6 (3+1, 2+2, 2+1,1+1)
Class B
Up to 14,4 kbps
SMS, USSD
GSM Phase 2/2+ supported
Server/User controlled I/O,
3 digital/analogue inputs, 5 digital outputs
GSM encryption, GSM security codes, AutoPIN, Platform authentication, System
monitoring
Class 6 (3+1, 2+2, 2+1,1+1)
Nokia 30 technical specification
• DATA CONNECTIONS:
• Nokia 30 supports HSCSD, GPRS and CSD for
wireless data connections.
• Nokia 30 supports wireless bearer selection that
enables changing between bearers (GPRS, CSD,
HSCSD, SMS and USSD) dynamically.
8
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
DC Characteristics:
Supply voltage :
Power consumption:
9
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
Rf Characteristics:
10
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• Mechanical specifications:
•
•
11
© NOKIA
FILENAMs.PPT/ DATE / NN
Dimensions: 84 x 53 x 26 mm (length x width x
height)
weight: 65 g
Nokia 30 technical specification
• Environmental specifications:
• Temperature range, operation: -10...+55 °C
• Temperature range, storage:
-40...+85 °C
• Humidity range, operation:
20...75 % noncondensing
• Humidity range, storage:
5...95 % noncondensing
• The terminal is not protected against ingress of
water.
12
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• Nokia 30 interfaces:
6
3
5
1
2
4
1
2
3
4
5
6
13
© NOKIA
FILENAMs.PPT/ DATE / NN
SIM card interface
External antenna connector
SIM cover
M2M System Connector (underneath the
terminal)
UI LEDs
Power interface (on the back of the terminal)
Nokia 30 technical specification
• M2M System Connector interface:
• The primary physical interface to the application is
through the 50-pin M2M System Connector. The
M2M system connector offers:
• M2M serial interface
• RS 232 interface
• Power interface
• Remote I/O control
• Audio Interface
2
1
4
3
6
5
8
7
…
…
44
43
46
45
48
47
50
49
• The 50-pin system connector is connected to the
application module with a flat cable connector:
• For example: Samtec FFSD-25-D-X-01, (X =
cable length in inches).
• The flat cable is connected to a pin header connector
on the customer application:
• For example: Samtec FTSH-125-01-L-DV-K-PTR).
14
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• System Connector/Audio Interfaces:
• The Nokia 30 has two alternative audio
interfaces available on the M2M system
connector:
• Digital audio interface (default)
• Analogue audio interface
• System Connector/Power interface:
• The M2M system connector provides regulated
voltage for the application. Alternatively, the
application module can supply the terminal with a
wide voltage range.
• DC input voltage range: 4.75 V – 15.0 V
• The Nokia 30 has a regulated switchable power
output for the low power customer application.
15
© NOKIA
FILENAMs.PPT/ DATE / NN
•
DC output voltage: 3.6 V
•
Maximum DC output current: 300 mA
Nokia 30 technical specification
• Power interface:
• The Nokia 30 has a 3.0 mm DC plug for
Nokia ACW-5 power supply:
•
DC input voltage range: 6.2 V – 14.0 V
•
Positive is connected to the centre
• System Connector/ M2M serial interface
• M2M serial interface provides one asynchronous
channel with simple handshaking capability. This
port uses M2M System Protocol in
communication.
• RS-232 Interface:
• In the AT Command Mode, the terminal is controlled by
AT commands and RS-232 handshake signals. RS-232
signals are available at both the M2M System
Connector and 9-pin D connector with RS232 adapter.
16
© NOKIA
FILENAMs.PPT/ DATE / NN
• The Nokia 30 supports autobauding (9600-115200).
Nokia 30 technical specification
• System Connector/ RS-232 Interface:
• The RS-232 handshake signals are optionally
available at 3V level using the M2M System
Connector.
• RS-232 handshake signals are available at standard
level using an RS-232 data adapter (available as an
accessory) 9-pin D connector (female). Signal levels
are:
• Minimum:
+/- 3 V
• Maximum:
+/- 15 V
• The terminal functions as DCE (Data Communication
Equipment / Modem) in a PC-environment.
17
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• RS-232 Interface:
Terminal
PC
Signals
(DCE)
(DTE)
D9 Female
18
© NOKIA
FILENAMs.PPT/ DATE / NN
Pin#
Signal
1
D9 Male
D25 Male
Name
Direction
Pin#
Pin#
DCD
Carried Detect
From GSM
1
8
2
RxD
Received Data
From GSM
2
3
3
TxD
Transmit Data
To GSM
3
2
4
DTR
Data Terminal Ready
To GSM
4
20
5
GND
Signal Ground
-
5
7
6
DSR
Data Set Ready
From GSM
6
6
7
RTS
Request To Send
To GSM
7
4
8
CTS
Clear To Send (*)
From GSM
8
5
9
RI
Ring Indicator
From GSM
9
22
Nokia 30 technical specification
• System Connector/ Remote I/O interface:
• There are three general purpose inputs and five
general purposes outputs on the M2M system
connector.
• Three inputs can be used in either digital (on/off) or
analog mode (continuous). The five output pins can
be used in digital mode only (set something on/off).
• The general purposes inputs or outputs can be
controlled with either specified text messages in User
controlled mode or with corba messages using
Server controlled I/O service.
• Antenna interface:
• The Nokia 30 GSM Connectivity Terminal is
equipped with an internal dual-band antenna.
• It is also possible to use an external antenna with a
standard FME connector. Nokia provides a special
adapter cable between the Nokia 30 and FME
connectors (accessory). The Nokia type code of this
adapter cable is XRM-1.
19
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• SIM card interface:
• The Nokia 30 supports small-sized 3 V SIM
cards.
• User interface:
• Three light indicators, light emitting diodes (LEDs)
form the user interface of the Nokia 30:
• LED 1 shows the terminal status while the other
two are reserved for the application module after
start-up.
• During start-up and special operations, all three
light indicators are in terminal use.
• All three LEDs can also be configured so that
they will not show any status and will stay shut
down during any operation.
20
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 technical specification
• User interface:
• Nokia 30 light indicator states during start up:
LED 1
LED 2
-
Green scan
Status LED
-
Green scan
Green scan
-
Red blink
-
-
Red blink
Red blink
Description
Power off / silent mode
Power on, connecting to network
PIN query /new PIN query
PUK query
Intensity of field strength:
21
© NOKIA
FILENAMs.PPT/ DATE / NN
Red blink
-
-
Green Blink
-
-
Green
-
-
Green
Green Blink
-
Green
Green
-
Green
Green
Green Blink
Green
Green
Green
Non-acceptable
< - 105 dBm
- 105 … - 100 dBm
Weak
- 100 … - 95 dBm
- 95 … - 90 dBm
Moderate
- 90 … - 85 dBm
- 85 … - 80 dBm
Good
> - 80 dBm
Nokia 30 technical specification
• User interface:
• Nokia 30 light indicator states during normal
operation:
LED 1
LED 2
Status LED
Description
*
*
Green
In service
*
*
Green blink
Call on
*
*
Green blink
Incoming call
*
*
Green/Red blink Message received / Voice mail in box
*
*
Red blink
Message arriving and memory is full
• Nokia 30 light indicator states in special situations:
LED 1
LED 2
Status LED
Description
Green/Red blink Green/Red blink Green/Red blink Insert SIM card
22
© NOKIA
FILENAMs.PPT/ DATE / NN
Red blink
Red blink
Red blink
Failure, contact service
Yellow
Yellow
Yellow
Initialising
Nokia 30 Basic sales package
• Nokia 30 Basic sales package
with a terminal ready for high-level
integration
• Nokia 30 GSM Connectivity
Terminal (TME-3)
• Nokia 30 product note
23
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 Swap package
• Nokia 30 Swap package with a
terminal ready for high-level
integration
• Nokia 30 GSM Connectivity
Terminal (TME-3)
24
© NOKIA
FILENAMs.PPT/ DATE / NN
Nokia 30 Complete sales package
25
© NOKIA
FILENAMs.PPT/ DATE / NN
•
Nokia 30 GSM
Connectivity
Terminal
•
Power supply unit
ACW-5
•
Data adapter RS232
•
Data cable RS-232
•
Installation screws
•
Nokia 30 product
note
•
Nokia 30 CD-ROM
Nokia 30 accessories
• Data package
• Data adapter RS-232
• Data cable RS-232
• Installation screws
• Nokia 30 CD-ROM, includes Nokia 30
AT command guide, Modem options for
Nokia 30, Nokia 30 Configurator
software and User’s guide for modem
use
• Power Supply Unit ACW-5
• Antenna adapter XRM-1
26
© NOKIA
FILENAMs.PPT/ DATE / NN
• Nokia 30 Configurator Software
• Nokia 30 settings, Windows 95, 98,
2000, NT4 user interface
• Freely downloadable in Forum Nokia
web page: