Mitsubishi Motors Cebu Corporation Threaded Case Study
Download
Report
Transcript Mitsubishi Motors Cebu Corporation Threaded Case Study
Mitsubishi
Motors Cebu
Corporation
Threaded Case
Study-Local Area
Network
User Requirements:
Topology
Star topology
User Requirements:
Operating
System
Windows 2000
Server
Linux
Windows 98
(host)
User Requirements:
Device
Connected
Switch
Hub
PC
Printer
Router
NIC(10/100)
Cables(CAT5-UTP)
User Requirements:
PC(Server,Host),
Hub, Switch UTP
Cable,OS, NIC,
Topology, MDF
Network Address
(Class C)
4 Departments (less
than 10 Host per
Department)
ISP (Bayan Tel)
Data Traffic
Possible Collision
occurs when two
host transmit data
at same time
because they use
only one switch
with four hubs.
Layer 1 Device:
CAT 5-UTP Cable
Hub
Patch Panel
RJ 45 Connector
DB9 Connector
Transceiver
Layer 2 Device:
NIC (Network
Interface Card)
Switch
Layer 3 Device:
Router
Type of Cable
Straight
Through
Roll-Over
Cross-Over
Bandwidth
10 Mbps
100 Mbps
Advantages
Speed
Less
Congestion
Firewall
(Security)
Disadvantages
Expensive
If central node
fails all
connected
nodes will be
affected
Mitsubishi
Motors Cebu
Corporation
Threaded Case
Study-Wide Area
Network
User requirements:
Topology: Star topology
Star topology connects all
cables to a central point of
concentration.
Legend:
Switch Workstation Server Printer
User requirements:
Network:
PC (server, host)
Operating System
Hub
Switch
Router
Modem
Network Interface Card
(NIC)
UTP Cables
Network Address
(Class C)
Five Department
Internet Service Provider
(ISP) - Bayan Tel
Globe
Main Distribution Facility
(MDF)
Patch panel
Cat 5 – UTP cable
RJ-45 connector
Transceiver (AUI port)
DB9 connector
Protocol
- IP
Operating System (OS)
Windows 2000 server
(server)
Built in NT
Windows 98 (host)
Second edition
Windows XP (host)
Linux (security server)
Application Software:
Microsoft Office 97/2000
Visual Basic
Jabber
Photoshop
Voice Over-IP
Accounting software
Layer 1 device:
Hub
- 3Com Baseline Dual speed
Hub (12/24 ports)
Patch panel
UTP cable – Cat5
RJ-45 connector
DB9 connector
Transceiver (AUI port)
Layer 2 devices:
Switch
3Com SuperStack300
100BaseTX/10Base T (12 ports)
NIC (Network Interface
Card)
3Com Ethernet Card
- Lynksys Ethernet 10/100 Mbps
Layer 3 devices:
Router
3Com Office Connect (US
Robotics Broadband Router)
Type of cable:
Straight through
Roll-over
Cross-over
Bandwidth:
10 Mbps
100 Mbps
Data Traffic:
Possible collision occurs
when two host transmit data at
the same because they only use
one switch and four hubs.
WAN advantage:
To eliminate redundant
data.
To reduce communication
cost.
To implement financial
system.
Easier access by the
administrator
WAN disadvantages:
Implementing WAN is
expensive
GROUP 2
RODRIGO E. SOLATORIO
MARK E.YBAÑES
DARWYN E.ANDRIN
PEPITO M. BALBERO
KIM TAHIMIK