Transcript Settings - Gigaset

Gigaset DE380 IP R
© Siemens, May 2006
Christian Eiting, Bocholt, 08.09.2008
Corded VoIP phone with outstanding speech quality
Product Highlights:
• CODECs: G.711u/a, G.729A/B, iLBC, G.722
• Wideband codec support (G.722) HDSP
• Handsfree
• 128 x 35 dots matrix Display
• Downloadable configuration file support
• 29 keys, 7 LEDs
• Phonebook with 200 entries
• 2 x Ethernet 10 / 100 Mbps (IEEE 802.3), WAN / LAN
DSL Modem
or Router
© SHC C.Eiting
© Siemens, May 2006
DSL Access
Features
• Configuration via Web interface or via menu
• Firmware updatable
• Compatible with all major SIP providers (Registration necessary)
• Preconfigured SIP provider settings
• Security: SRTP, TLS
• Caller Display (CLIP)*
• 5 configurable keys
• Headset-plug 2 x 3,5 mm (Micro, Headset)
• Three-party conference
• Call hold / consultation / toggle (HOLD)
• Call forwarding (CF)
• Call transfer
© SHC C.Eiting
© Siemens, May 2006
* country, network and provider-dependent
Packing
• 1 x Gigaset D380 IP phone
• 1 x handset
• 1 x handset cable
• 1 x mains adapter
• 1 x LAN cable
© SHC C.Eiting
© Siemens, May 2006
• 1 x CD
First steps
Connect the phone with Internet-Router as
you can see in the picture!
Optional:
© SHC C.Eiting
© Siemens, May 2006
You can connect the phone to a computer as
you can see in the left picture. The phone
has an integrated 2-port switch.
Configure the Router via Selfinstaller Tool
With the Selfinstaller Tool is a Software Tool with this you can set up the phone in a few steps. It
is a easy way to configure the phone.
Step 2: Start den Installation wizard or you
can choose between User guide and
Product page online.
© SHC C.Eiting
© Siemens, May 2006
Step 1: Choose a language
Step 3: Check the package contents
Step 5: Connect the telephone to router
Step 4: Connect the handset to telephone
base unit
Step 6: Optional connection to computer
© SHC C.Eiting
© Siemens, May 2006
Selfinstaller
Selfinstaller
Step 7: Connect telephone to mains
power supply
© SHC C.Eiting
© Siemens, May 2006
Step 8: Enter the IP address which you can
seeon the display of the phone.
Selfinstaller
© SHC C.Eiting
© Siemens, May 2006
Step 9: The WebUI starts and you have to
logion. The standard password is „admin“.
Configuration Wizard
The configuration wizard can help you to adjust network settings and enter the
details of your SIP providers quickly and easily. You can configure in a few steps the
following settings:
1.
Network Connection Mode – set IP mode for your device.
2.
Network Configuration – set detail network parameters.
3.
Profile Download – Automatic download of most configurations
4.
SIP Configuration – set account and server information
© SHC C.Eiting
© Siemens, May 2006
Step 3 und 4 you can also find in the area „Settings“ !
Settings – Network Settings
The DE380 IP R has an integrated 2-port Hub, therefore you have the possibility to connect a DSL
modem directly or connect the phone to a router. If you use a router, the must switch to „Bridge Mode“
and if you use a modem, then you have to setup the „Router Mode“.
© SHC C.Eiting
© Siemens, May 2006
As well you can set up your PPPoE Connection, the IP Range or the DNS Server.
Settings – VoIP Settings
! If you enalble this
function, your
telephone number
will not be displayed!
Account Settings: You need to set up a VoIP
provider for each number. Enter the the
configuration data that is neccesary for
accessing your VoIP provider‘s SIP service.
You will receive this data from the VoIP
provider.
© SHC C.Eiting
© Siemens, May 2006
Advanced Settings: You can change ports
and some other values like timeouts, egg. .
Please note any information from your
provider!
Settings – VoIP Settings
Server Settings: You have to setup the SIPserver of your VoIP provider.
© SHC C.Eiting
© Siemens, May 2006
Voice Settings: You can set various
parameters for voice transmission, e.g. the
comprehension method (codec) to be used.
These parameters should only need adjusting
if so required by the SIP gateway or SIP
proxy you are using.
Settings – VoIP Settings
Security: The Secure Real-Time Prtocol (SRTP)
allows you to encrypt voice data transmitted
using the Real-Time Protocol (RTP).
© SHC C.Eiting
© Siemens, May 2006
NAT Traversal: If your phone is connected to
a router with NAT and / or a firewall, you must
select some settings in this area so that your
phone can be reached from the internet.
Settings – Phone Settings
Call Forwarding: You can autimatically
forward incoming calls t oanother
number.
General:
• Adjust Volume of the ringers / handset /
loudspeaker / etc.
• Select the language
• Melody Upload ( max. 22kb / µ-law encodet)
Programm Keys: Assign functions to the
programmable keys on the right-hand
side of your phone.
© SHC C.Eiting
© Siemens, May 2006
• Set the ringer
Settings – Phone Settings
Alarm: You can program up three alarm
settings. For each setting you can define
whether the alarm should go off on a
specific daily.
Phone Book: You can save up to 200 phone
numbers (32 digits max.) and corresponding
names (18 digits max.) in the phonebook.
Additionaly you can dial out from your list or
import / export CSV files.
© SHC C.Eiting
© Siemens, May 2006
DND (Do not Disturb): You are not
available to incoming calls from these
numbers.
Settings – Phone Settings
© SHC C.Eiting
© Siemens, May 2006
Call list: Missed / Dialed / Received Calls
Settings – Management
Administration:
• Remote Administration – Only programmed IP
addresses have access permition
• Administration Accounts – You can craete „admin“ or
„user“ accounts.
© SHC C.Eiting
© Siemens, May 2006
System Log Settings: You can log system events
such as messages, warnings and errors together
with priority and type of event on a syslog server.
Settings – Management
Date and Time: Define wheater you want to obtain
data and time information automatically from a time
server or enter the date and time manually.
Ping Test: You can ping an IP
address to check wheater another
device is available in your
network.
© SHC C.Eiting
© Siemens, May 2006
Reboot: You may have to
reboot your phone in certain
operational situations.
Settings – Management
Firmware Update: Firmware updates are available
from the Customer Care website to always keep your
phone up to date. You can update automatically or
manually.
© SHC C.Eiting
© Siemens, May 2006
Device Configuration: You can save or restore
your phone‘s configuration or reset it to the
default settings.
Information Tab
© SHC C.Eiting
© Siemens, May 2006
You will see an overview of important settings for your phone.
© SHC C.Eiting
© Siemens, May 2006
Brief overview Gigaset DE380 IP R
© SHC C.Eiting
© Siemens, May 2006
Connecting the headset
© SHC C.Eiting
© Siemens, May 2006
THX