Transcript LRS-102_v3.44

LRS-102
General Availability
Version 3.44
LRS-102 Ver. 3.44– 2012 Slide 1
Agenda
•
•
•
•
•
•
•
•
Introduction
Product Overview
Applications
Feature Comparison
Product/Portfolio Value Proposition
Sales Tools On-Line
Ordering information
Summary
LRS-102 Ver. 3.44– 2012 Slide 2
AXCESS+ for Carriers
LRS-102 Ver. 3.44– 2012 Slide 3
Market Segments
Service
Providers
Transportation
& Utilities
Enterprise
City carrier,
alternative and
Incumbent carriers,
cellular, ISP
Highway, Railways,
Airports, Motorway,
Marine, Energy,
Oil/Gas, pipleline,
water
Insurance & Banks,
public safety,
Government,
university and
Military
Multi services
extension over
copper, multipoint
connectivity
Multi services
extension over
copper, multipoint,
daisy chain , ring
connectivity
Multi services
extension over
copper, multipoint
connectivity
LRS-102 Ver. 3.44– 2012 Slide 4
First Mile – Product Portfolio
SHDSL/SHDSL.bis CPE
Modems
• ASMi-52/52L
Transparent
SHDSL/SHDSL.bis Rack
• LRS -102 - Up to 96 E1’s & 24 ETH
Repeaters
• SHDSL/SHDSL.bis repeaters
• ASMi-54/ASMi-54L/54LRT
ports over HDSL/SHDSL.bis lines
• Indoor/outdoor units
• E1,ETH,Serial port
or 112 E1’s over fiber
• 2W/4W
(V35,X.21,RS-530)
• 2W,4W,8W
• LRS -16, up to 16 E1 to SHDSL
lines
LRS-102 Ver. 3.44– 2012 Slide 5
LRS-102 Introduction
• Central transparent rack solution for E1 and ETH
connectivity over fiber and copper
• Single box solution for TDM and IP networks, reduce Opex
& Capex
• RADview SNMP management for convenient and low-cost
maintenance on PC or Unix (HPOV) platforms
LRS-102 Ver. 3.44– 2012 Slide 6
General Application
Remote Site
Metro
Ethernet
SHDSL.bis
ASMi-54/
ASMi-54L
Site 1
Router
4 x ETH
PBX
ETH
Optimux-106/
Optimux-108
PBX
E1
E1/T1
POP
ETH
LRS-102
Fiber (Up to 120 km)
n x E1/T1
&
n x ETH
Backup Link
SHDSL
Remote Sites
Site n
ASMi-52
Router
ETH
Optimux-106/
Optimux-108
NMS
Router
Optimux-34/
Optimux-25
PBX
E1/T1
ETH
16 x E1
PBX
• Solution over copper - Up to 96 E1’s over copper (SHDSL/SHDSL.bis)
together with 24 ETH ports
• Solution over fiber - Up to 196 E1’s over fiber together with 24 ETH ports
LRS-102 Ver. 3.44– 2012 Slide 7
Major Customers
City Carrier, Cellular, ISP,
Alternative Carrier, Incumbent
Carrier
Insurance & Banks
Public Safety
Government
University
Military
Highway, Railways, Airports,
Motorway, Marine
Energy, Oil/Gas, Pipeline
Water, Mine
LRS-102 Ver. 3.44– 2012 Slide 8
LRS-102 Introduction
• Central transparent rack solution for E1 and ETH connectivity
over fiber and copper
• Single box solution for TDM and IP networks, reduce Opex &
Capex
• RADview SNMP management for convenient and low-cost
maintenance on PC or Unix (HPOV) platforms
LRS-102 Ver. 3.44– 2012 Slide 9
LRS-102
Physical View
PS Slots
System redundancy & Flexibility:
• Dual AC or DC (48V) hot-swappable
power supplies (Optional)
System redundancy:
• Dual common logic supported
(Optional)
4 U high
19” wide
12 I/O Slots
96 ASMi Modules
24 Optimux Modules
LRS-102 Ver. 3.44– 2012 Slide 10
Main Features
Features
Description
Customer Benefits
Single IP address
• Enhances management by providing a single point
of contact, using a single IP address, for the
management of ASMi-54L/LRT remote units
connected to LRS-102
• Only one IP address is required to manage all remote
ASMi-54L/LRT units connected to LRS-102 (rather than
tens of IP addresses required by a central solution without
single IP support)
RADview-EMS management
• Unified management system for the entire
solution, including central and remote devices
• Single management platform lowers CapEx. Easy
provisioning, detection and fixing of network faults
reduces service downtime and lowers OpEx
Fiber and copper infrastructure
support
• Single-box solution for both fiber and copper
aggregation or termination
• Reduced number of units at the central site lowers OpEx
and CapEx
Complete solution for TDM and
Ethernet over fiber and copper
• The chassis accommodates up to 12 I/O modules
supporting up to 24 Ethernet and up to 96 E1/T1
ports
• Grooming of underutilized lines optimizes bandwidth
consumption and lowers CapEx by reducing the
number of units at the central site
• Smooth migration path between legacy and next
generation networks
Carrier grade redundancy and
resilient links
• Redundant power supplies
• Minimizing service downtime reduces OpEx
• Hot-swappable, redundant uplinks
LRS-102 Ver. 3.44– 2012 Slide 11
LRS-102 – Current Supported
Cards
• Copper cards
– ASMi-54C/ETH/UTP or SFP
– ASMi-54C/E1/N
• Fiber cards
– Optimux-25/34C
– Optimux-106/108C
LRS-102 Ver. 3.44– 2012 Slide 12
ASMi-54C/E1/ETH/N – New Card
in Phase 3.3
• ASMi-54C/E1/ETH/N/PF
– 8 E1 and 2 ETH configurable ports for 8 pairs SHDSL.bis
– 2 x 10/100BaseT over copper or fiber
– Dual bearer mode for E1 and ETH HDLC
– Full management support
• PF Option
– Optional remote power feeding by dual slot card
– Enable 4 groups of 2W or 4W
– 180Vdc powered over the lines
LRS-102 Ver. 3.44– 2012 Slide 13
TDM & ETH Services over SHDSL.bis
Using ASMi-54C/E1/ETH/N
Headquarters
IP/MPLS
Branches
Switch
GbE
n x ETH
LRS-102
SHDSL.bis
ASMi-52/
ASMi-54/
ASMi-54L
PBX
E1
Router
NMS
PBX
LAN
FE
n x E1
• Simple & cost effective solution for providing TDM & ETH Services
• Single platform for copper and fiber solution with high port density
• Single IP address for managing central device and remote CPEs
• Low power consumption, smaller size
LRS-102 Ver. 3.44– 2012 Slide 14
ASMi-54C/ETH
• High density
– 2 ETH ports over 8 SHDSL/SHDSL.bis lines
– Up to 96 pairs of ETH EFM lines
• High Reliability
– EFM bonding support in case of failure of one of
the DSL line
• Advanced ETH performance
– QOS – queuing based on VLAN priority bit
– Up to 8 user flows (based on VLAN)
• Single NMS platform – low Opex
LRS-102 Ver. 3.44– 2012 Slide 15
ASMi-54C/ETH – Physical View
DB-25 Connector for 8 pairs
• Works opposite:
– 2 x ASMi-54/ASMi-54L – 8W
– 4 x ASMi-54/ASMi-54L – 4W
– 8 x ASMi-54/ASMi-54L – 2W
• With ETH Services
• Dual ports:
– UTP – 10/100BaseT , RJ-45
– Fiber - SFPs
LRS-102 Ver. 3.44– 2012 Slide 16
ASMi-54C/E1/N
• 8 E1 ports over 8 SHDSL/SHDSL.bis lines
– High density, up to 96 E1 in central site, enables cost effective
solution in one platform
– Each module work Opposite SHDSL or SHDSL.bis modem, enable to
offer the “right” price modem as per required modem
performance/rate
• Single management point on the LRS-102
– Simplify and reduced maintenance time and efforts of management
of each modem
– EOC is supported for ASMi-52 remotes enable full management
connectivity and prevent the needs for special IP address at the
remote site
LRS-102 Ver. 3.44– 2012 Slide 17
ASMi-54C/E1/N – Physical view
• SHDSL lines – DB-25 Connector for 8 pairs
• Works opposite:
– 4 x ASMi-54/ASMi-54L/ ASMi-52/ASMi-52L - 4W
– 8 x ASMi-54/ASMi-54L / ASMi-52/ASMi-52L - 2W
• E1 line – DB-44 Connector for 8 E1 port – Individual
clock source, enable setting of different E1 clock
source from different locations
LRS-102 Ver. 3.44– 2012 Slide 18
LRS-102 – Current Supported
Cards
• Copper cards
– ASMi-54C/ETH/UTP or SFP
– ASMi-54C/E1/N
• Fiber cards
– Optimux-25/34C
– Optimux-106/108C
LRS-102 Ver. 3.44– 2012 Slide 19
Supported Cards
LRS-102 Version 3.44
Product
Technology
Working Opposite
Description
OP-108C
Fiber optic
Optimux-108,
Optimux-108L
Dual multiplexer; 4E1 channels, with 100 Mbps Ethernet, fiber optic
link redundancy option
OP-106C
Fiber optic
Optimux-106
Dual multiplexer combining 4T1 channels, with 75 Mbps Ethernet, fiber
optic link redundancy option
OP-34C
Fiber optic,
Copper
Optimux-34
16 E1 and Ethernet multiplexer, up to 16 independent E1 and one Fast
Ethernet channel over a single optical or copper link, fiber optic/copper
link redundancy option
OP-25C
Fiber optic
Optimux-25
16 T1 and Ethernet multiplexer, up to 16 independent T1 streams and
one Fast Ethernet channel over a single optical link, fiber optic link
redundancy option
ASMi-54C
SHDSL.bis
ASMi-54/4ETH (2W,4W,8W)
16-wire, SHDSL.bis modem, two Ethernet 10/100BaseT ports, UTP or
SFP
ASMi-54C/N
SHDSL/
SHDSL.bis
ASMi-54/ASMi-54L/ASMi-52/
ASMi-52L (2W / 4W for ETH
and/or E1 services )
16-wire, SHDSL/SHDSL.bis modem, eight E1 ports and two optional
Ethernet ports
LRS-102 Ver. 3.44– 2012 Slide 20
Typical Applications
• Complete solution over fiber and copper combination
• Service providers – City carrier
LRS-102 Ver. 3.44– 2012 Slide 21
Service Providers – City Carrier
Customer Needs
• Centralized solution with management
• Variety of access technologies and devices
• Same equipment for both fixed and cellular networks
Customer Benefits
• Single management
• Scalable solution
• Unique solution: SHDSL concentrator
with Gigabit Ethernet uplink
BSC
BTS
ASMi-52L
E1
GSM Traffic
GSM Traffic
SHDSL
SHDSL
BTS
ASMi-52L
E1
E1s
Large PoP
BTS
ASMi-52L
E1
PC
STM-1
Megaplex-4100
TDM
Network
E1s
Small PoP
BTS
ASMi-52L
LRS-102
ASMi-54L
E1
PC
ASMi-54L
ETH
ETH
Cisco 7000
LAN
ETH
GbE
LAN
IP/ETH
Network
ASMi-54L/RT
SHDSL
LAN
Data Traffic
ASMi-54L/RT
Data Traffic
LAN
SHDSL
LRS-102 Ver. 3.44– 2012 Slide 22
ETH and TDM Connectivity Using
any Media
FE
Headquarters
Fiber
OP-108L
E1’s
BSC
n x E1
TDM
MP-4100/LRS-102
4 x FE
Copper
SHDSL.bis
RNC
PSN
n x ETH
n x E1
ASMi-5x
4 x E1
Wireless
FE
Airmux-200
Airmux-200
E1’s
• Reduced OPEX with single access link for multiple types of services and
infrastructures
• Backhauling over any available access media (copper, fiber, wireless)
• End-to-end connectivity solutions
LRS-102 Ver. 3.44– 2012 Slide 23
Management
RADview-EMS is a unified carrier-class management platform for RAD devices
using a variety of access channels as SNMPv1/3, HTTP/S, TFTP and Telnet/SSH.
In addition, it features third-party device monitoring capabilities
LRS-102 Ver. 3.44– 2012 Slide 24
Management, Benefits &
Features
Benefits
● Turnkey system including hardware and software!
● Fully compliant with TMN standards
● Client/server architecture with multi-user support
● Interoperable with third-party NMS and leading OSS systems
● IBM Tivoli’s Netcool®/OMNIbus™ plug-in
● Minimize integrations costs associated with new NE additions
Key features
● Ensures device health and congestion control
● Topology maps and network inventory
● Advanced FCAPS functionality
● Software & configuration management
● Business continuity - High-Availability and Disaster Recovery
● Handover between operators
LRS-102 Ver. 3.44– 2012 Slide 25
RADview-EMS Advanced
FCAPS
Fault management
• Detects and isolates faults in network devices, initiates remedial actions and
distributes alarm messages to other management entities in the network.
Configuration management
• Enables operators to configure, install and distribute software to all devices across the
network. In addition, the system tracks version changes and maintains software
configuration history
Accounting management
• Manages individual and group user accounts and passwords, generating network
usage reports to monitor user activities.
Performance management
• Supports real-time monitoring of QoS and CoS, producing real-time and periodic
statistics. The statistics collector compresses data to minimize bandwidth use for
management traffic and exports CSV files to OSS or third-party management systems
Security management
• Allows network administrators to track user activities and control the access to
network resources with a choice of security features
LRS-102 Ver. 3.44– 2012 Slide 26
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Manage Event Log parameters
● Manage the way Events are displayed in the Event Browser
● Manage system response upon occurrence of specific Events.
● Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)
● Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting
LRS-102 Ver. 3.44– 2012 Slide 27
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Realistic representation of the devices (shelf-view)
● Tracks configuration changes
● Configures, installs, and distributes software and configuration files across the network
● Viewing and/or modifying configuration (system, ports, and alarms)
● Enables viewing the diagnostics and status information
Web
Shelf-View
LRS-102 Ver. 3.44– 2012 Slide 28
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Audit trails for Security, System and Applications activities
● Tracks and log the shelf-view user activity
● Create and manage user accounts and groups
● Manage various server setting
Applications activities
Security logs
LRS-102 Ver. 3.44– 2012 Slide 29
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Monitors network performance (QoS, CoS)
● Current statistics (Real-time)
Statistics
● Intervals statistics
● Reflects Agent statistics
● RADview statistics collector (*supported devices only)
● Collect and compress the data
● Retrieved lost data upon connection failure
● Minimizing management traffic
● Exports CSV ASCII files for OSS
LRS-102 Ver. 3.44– 2012 Slide 30
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● View and manage EMS Security profiles in a graphical interface.
● Create and edit security profiles.
● Create Common/Private view profiles per user/group
● Collects accounting data and generates network usage reports
● Define password policies
Security profiles
LRS-102 Ver. 3.44– 2012 Slide 31
Device Management
• RAD products support the following management
capabilities
Device Management
● SNTP
● Menu driven terminal
● Radius
● TFTP
● Web-GUI
● SNMP v1, v3
● Out-of-band mgt port
● In-band mgt
● ICMP
LRS-102 Ver. 3.44– 2012 Slide 32
LRS – Product Line Table
Rack Name
Card Supported
Max.E1 Ports
Max. ETH Ports
ETH Performance
SHDSL, 2W ports
16 ports
2 ports for
management
N/A
SHDSL.bis , 2w,4w,8w ports
Fiber cards
96 ports
24 ports
VLAN aware, VLAN
staking, stripping
LRS-16
LRS-102
LRS-102 Ver. 3.44– 2012 Slide 33
First Mile – Value Proposition
High bandwidth
• High rate up to 22Mbps over copper lines
• Selectable bandwidths and price according to customer needs
Extended Reach & Variety of Services
• Delivers ETH & E1, data and voice services over a single link
• Extends service reach over fiber or over copper
• Combination of fiber and copper from one central solution
Save more on OpEx & CapEx
• Single box for multiple services
• Simple remote management
• Eliminates the need for external ETH switch in the remote unit
Central site solution for LM with LRS-102
• Complete solution with unified management
• Interoperable with FCD, ASMi, Optimux
LRS-102 Ver. 3.44– 2012 Slide 34
Ordering Information
Ordering Option
Description
LRS-102/ACR/CL1R
12-slot modem rack with SNMP management, redundant AC power supply, redundant
common logic module
LRS-102/DCR/CL1R
12-slot modem rack with SNMP management, redundant DC power supply, redundant
common logic module
LRS-102/UNBAL/DCR/CL1
12-slot modem rack with SNMP management, Unbalanced E1 port, redundant DC power
supply, Common Logic module
LRS-102/UNBAL/DCR/CL1R
12-slot modem rack with SNMP management, Unbalanced E1 port, redundant DC power
supply, redundant common logic module
LRS-102/DCR/CL1
12-slot modem rack with SNMP management, redundant DC power supply, Common Logic
module
LRS-102 Ver. 3.44– 2012 Slide 35
First Mile – Sales Tools
• Web Sites
• Brochures
LRS-102 Ver. 3.44– 2012 Slide 36
Sales Tools cont…
• Case Studies
• Application Notes:
LRS-102 Ver. 3.44– 2012 Slide 37
Sales Tools cont…
• Video
• Calculators
LRS-102 Ver. 3.44– 2012 Slide 38
Summary
• LRS-102 is a cost effective, managed and single platform for
fiber and copper media
• This rack enable smooth migration from TDM network to IP
thanks to multiplexer cards
• High port density over any SHDSL/SHDS.bis lines or fiber line
enable connectivity of ETH and E1 services and reduce
dramatically the price per link with a low OPEX investments
LRS-102 Ver. 3.44– 2012 Slide 39
Thank You
For Your
Attention
www.rad.com
LRS-102 Ver. 3.44– 2012 Slide 40