Transcript STB Configuration For IPTV

Installation of Set Top Box (STB)
Model: S-Box7203
1
What is STB?
STB = Set Top Box
2
Why do we need STB?
Analog
Signal
Digital
Signal
STB encode/decode the digital signal and provide
the TV set with known analogue signal.
3
STB hardware Connection Guide
TV
5. Connect the audio cable
STB
6. Connect the power
cord.
4. connect the
network cable
1. Connect the power.
2. Connect the
DSL line
3. Turn on the
Modem
4
HG 510
STB Remote
Configuring STB Through
SET Command
5
Displaying the Configuration Page
6
•
By pressing the SET button will get the above login page
•
Enter the password (8288 by default)
•
Get the configuration main menu.
Configuration main menu
7
• Saving the Configuration
All changes need a password 3008 to be saved. If
"successful!" is displayed, it indicates that the
configurations have been successfully saved. If "password
error!" is displayed, enter the correct password and try to
save again.
8
• 1 - Network Configuration
The STB has three network access modes: Static IP, DHCP, and
PPPoE. We can select one of them so as to match the type
of network access provided at your premises.
9
• Static IP
Enter the following Parameters:
•
IP address
•
Subnet mask
•
DNS address
•
Gateway address
•
IGMP version of the switch
(this item needs to be configured for multicast services)
10
Static IP configuration page
(IGMP - Internet Group Management Protocol)
11
PPPoE configuration page
• PPPoE
We need to configure the following parameters:
PPPoE user name : xxxxx@ptcl-iptv
PPPoE password : xxxxx
IGMP version
: IGMP v2
(Internet Group Management Protocol)
12
2 - Browser Configuration
13
Browser Configuration
• Home page:
It is the first Web page displayed when the STB is turned on.
Usually, it is the EPG page.
http://203.99.161.14:8082/EDS/jsp/index.jsp.
• Entry: we can select BTV or EPG.
If BTV is selected, the TV will display the last channel you watched last
time.
If EPG is selected, the TV will display the first page of EPG.
• Region:
•
14
Select a region, the warning language of STB will be changed to the
language of the region you selected.
3 - TV Standard Configuration
15
TV Standard Configuration
•
In the TV standard configuration, we can select TV standard and set
video display region and other parameters,
• TV standard:
We can select PAL or NTSC according to the EPG standards the ISP provided
and your local TV standard.
• Top margin:
The margin between the video display area and the top margin of the TV.
• Left margin:
The margin between the video display area and the left side margin of the
TV.
• Width:
The width of the video display area.
• Height:
The height of the video display area.
16
4 - Time Configuration
(NTP - Network Time Protocol)
•
•
•
•
17
In the time configuration, set the time information of STB
Cur time: The current time displayed
Time zone: 5
Ntp time server: 203.99.161.89
Note: Please, insert the correct time zone and NTP, server without these
settings TSTV will not work.
5 - Software Information of STB
18
6 - Hardware Information of STB
19
7 - Upgrade Software of STB
This page lists the configuration for the auto upgrade of the STB.
We need to enter the upgrade address, as shown above.
20
8 - Identity Information of STB
This page lists the identity information of the STB, including
the MAC address and the product serial number. These
parameters are set by the factory and cannot be changed.
21
9 - Restore Parameter
22
CA card Installation
(CA- Conditional Access)
• Smartcard
The Smartcard with metal chipset down side
has to insert into slot on front panel of STB.
When the STB is switched on it authenticates the
username and password associated with that
particular CA card.
The user will not be able to view any
services without entering of the IRDETO
(encryption) CA card.
IRDETO provide CA Security Solution for Digital TV, IPTV and mobile
I.R. DE TOONDER the developer of M-Net decoder
23