Transcript ETX_36_Product_presentation

ETX-36
Version 1.00
Beta
October-2012
ETX-36 version 1 product presentation
Agenda
• Introduction
• Applications
• Product overview
• Main features & benefits
• Management
• Summary
ETX-36 version 1 product presentation
ETX Portfolio
Performance
Ethernet Service
Aggregation Platform
ETX-5300A
High End MDD
Advanced timing
Circuit emulation Services
High End EDD
Advanced TM
HW based OAM
ETX-205A
ETX-220A
1/10GE Interfaces
10GE NTU
10GE Ring
ETX-204A
Basic NTU
Flow based Service
ETX203AX/AM
MiNID
ETX-36
Scale
GE
nxGE
nx10GE
ETX-36
Ethernet Demarcation Switch
• Ethernet Demarcation switch providing
– Layer 2 switch functionality and flow classification for service
prioritization allowing quality of service enforcement for critical
applications
– ETH OAM, fault detection and propagation
• Link Aggregation protection mechanisms
• MEF 9 & 14 E-Line and E-LAN services complaint
• Temperature hardened option (-20°c ― 65°c)
ETX-36 version 1 product presentation
Target Customers
• Service providers offering scalable Ethernet services
– Within their footprint (On-Net), or
– Outside their footprint (Off-Net) by leasing facilities from wholesale
providers
• Reducing the TCO with cost optimized solution and End-toEnd monitoring and management
Remote Branch
RADView
GbE
ETX-36
HQ
Carrier
Ethernet
Network
10G/
GbE
ETX-5300A
GbE
ETX-36
PE
PE
GbE
Carrier Ethernet
Service Level Assurance & Traffic Management
ETX-36
ETX-36 version 1 product presentation
Applications
ETX-36 version 1 product presentation
Retail services
RADView
EMS
GbE
ETX-36
ETX-5300A
Carrier
Ethernet
Network
10G
PE
GbE
PE
ETX-36
Aggregation
Switch
GbE
ETX-36
Link OAM
End-to-End Service OAM
The Need
Solution Benefits
• Demarcation device for office
connectivity
• Cost optimized solution
• OAM – link and service
• Traffic prioritization
• Space and power savings
– OPEX
– CAPEX
• Painless deployment of End-to-End
solution
– Smart Aggregation device
– Complete management suit
ETX-36 version 1 product presentation
Substation Multiservice
Connectivity
FE
GbE
Control
Center
MP-4100
SHDSL
GbE
SDH/SONET MP-4100
GbE
MP-2104
ETX-36
LAN
E1
FE
Voice
V.35
FE
SCADA
The Need
MP-4100
• Connectivity of new generation services
at each substation or to central control room
• Maximum coverage using any infrastructure
• Minimum downtime using resilient equipment and
topology
• Environmental hardened CPE
FE
GbE
FO
GbE
Optimux
ETX-36
LAN
FE
Video
Camera
GbE
FE
SHDSL
GbE
LAN
ASMi
ETX-36
E1
FE
IPPBX
PBX
Solution Benefits
• Lower TCO
• Cost optimized Demarcation switch
• Lower Opex by converging services and optimizing bandwidth utilization
• Painless migration with single aggregation device for different access technologies
and infrastructures
ETX-36 version 1 product presentation
Access Aggregation
1 GbE
ETX-36
1 GbE
ETX-36
PE
10 GbE
ETX-5300A
IP/MPLS
10 GbE
G.8032
Rings
ETX-36
ETX-5300A
ETX-36
• Complete Access Network solution
– CAPEX saving using a low cost CPE
– Aggregation device providing Advanced Traffic Management
• OPEX saving using OAM for network maintenance
• Initiate SLA base services at the Customer premises
• MEF Compliant solution
ETX-36 version 1 product presentation
Product overview
ETX-36 version 1 product presentation
Physical View
Mini-USB based RS232
local craft terminal
2 FE/GE network ports:
Copper (RJ-45) or Fiber (SFP)
Out of band
management
4 FE/GE User ports:
10/100/1000BaseT
• ½ 19”, 1U enclosure
• Plastic enclosure with external AC PS
• Metal Enclosure with internal AC or DC PS
– Extended temperature option -20°c ― 65°c
• Max Power consumption 5.5W
External PS
ETX-36 version 1 product presentation
Switch with service
differentiation capabilities
The ETX-36 is a switch with ability to isolate specific services
and provide them with unique QoS.
• Switch capabilities
• Service differentiation
– 802.1D-compliant non-blocking bridge
– 32 flows
– 2k Mac address table
– Classification
– 9k MTU
• VID
– 802.1q Vlan-Aware Bridge
• 802.1p
– Vlan Stacking (802.1ad)
• source/dest IP
– Per flow rate limitations
– P-bit
– Vlan Stacking
ETX-36 version 1 product presentation
QoS
• Ingress policing at 64k granularity
• Classes of Service
– 6 CoS per Network port
– 4 CoS Per User port
• Shaping per egress queue or port
• Scheduling
– Strict Priority (SP)
– Weighted round Robin (WRR)
– Mixed
• Classification to flows:
− Vlan
− IP-Precedence
− SRC/Dest IP
− P-bit
− DSCP
− SRC/Dest MAC
− Ether type
ETX-36 version 1 product presentation
OAM – Operations Admin. &
Maintenance
Branch A
PE
EVC
Headquarters
Real Time
Priority Data
Best Effort
Ethernet over
Fiber NTU
Priority Data
Best Effort
Real Time
Priority Data
Best Effort
PE
EVC 1
UNI
PSN
EVC 2
Real Time
Ethernet over
PDH NTU
Branch B
UNI
EVC
Ethernet over
xDSL NTU
Real Time
Priority Data
IP DSLAM
IEEE 802.3-2005 (802.3ah)
IEEE 802.3-2005
(802.3ah)
Best Effort
UNI
IEEE 802.3-2005 (802.3ah)
IEEE 802.1ag Connectivity Management
Single segment (link)
IEEE802.3-2005 (802.3ah)
End-to-end
Connectivity Fault Management 802.1ag
•Discovery
•Connectivity check
•Remote loopback
•Fault propagation
•Active and Passive modes
•Continuity check
•Loopback
•Link trace
ETX-36 version 1 product presentation
Additional Features
• Ling Aggregation (LAG)
– Static LAG (802.3-2005 based) No LACP
– Available on Network ports only
– Load Balancing aggregating two network ports to a single 2GbE logical link using
Hash Load Balancing Algorithm based on Source/Destination IP or MAC addresses
• Dying Gasp
– Sending D.G signaling on 802.3ah and SNMP trap
• Fault propagation
– Network-to-User
– User-to-Network
•L2CP Handling
•Timing and Synchronization
– SyncE network to user port distribution
– SNTP
Management
RADview-EMS is a unified carrier-class management platform for RAD devices
using a variety of access channels as SNMPv1/3, HTTP/S, TFTP and Telnet/SSH.
In addition, it features third-party device monitoring capabilities
ETX-36 version 1 product presentation
Management, Benefits &
Features
Benefits
● Turnkey system including hardware and software!
● Fully compliant with TMN standards
● Client/server architecture with multi-user support
● Interoperable with third-party NMS and leading OSS systems
● IBM Tivoli’s Netcool®/OMNIbus™ plug-in
● Minimize integrations costs associated with new NE additions
Key features
● Ensures device health and congestion control
● Topology maps and network inventory
● Advanced FCAPS functionality
● Software & configuration management
● Business continuity - High-Availability and Disaster Recovery
● Handover between operators
ETX-36 version 1 product presentation
RADview-EMS advanced FCAPS
Fault management
• Detects and isolates faults in network devices, initiates remedial actions and
distributes alarm messages to other management entities in the network.
Configuration management
• Enables operators to configure, install and distribute software to all devices across the
network. In addition, the system tracks version changes and maintains software
configuration history
Accounting management
• Manages individual and group user accounts and passwords, generating network
usage reports to monitor user activities.
Performance management
• Supports real-time monitoring of QoS and CoS, producing real-time and periodic
statistics. The statistics collector compresses data to minimize bandwidth use for
management traffic and exports CSV files to OSS or third-party management systems
Security management
• Allows network administrators to track user activities and control the access to
network resources with a choice of security features
ETX-36 version 1 product presentation
Device Management
• RAD products support the following management
capabilities
Device Management
● SNTP
● Syslog
● CLI
● Statistics collection
● Radius
● Out-of-band mgt port
● TFTP
● In-band mgt
● SSL
● ICMP
● SSH
● SNMP v1, v3
● Trap sync
ETX-36 version 1 product presentation
Ordering Information
Ordering Option
Description
ETX-36/ACEX/2SFP/4UTP
External AC Power Supply, plastic enclosure with 2xSFP network ports
and 4 GbE RJ-45 user port
ETX-36/AC/2UTP/4UTP
Metal enclosure with Internal AC Power supply, 2 GbE RJ-45 network
ports and 4 GbE RJ-45 user ports
ETX-36/DC/2SFP/4UTP/SYC
Metal enclosure with Internal DC Power supply, 2 GbE SFP based
network ports and 4 GbE RJ-45 user ports with ability to forward the
SyncE clock received from the network port and transport it to the user
ports.
ETX-36/AC/2UTP/4UTP/H
Metal enclosure with Internal AC Power supply, 2 GbE RJ-45 network
ports and 4 GbE RJ-45 user ports with extended temperature range
support
ETX-36 version 1 product presentation
ETX-36 / ETX-203AX
Comparison Table
ETX-36
ETX-203AX
Benefits
User ports
• 4 GbE ports
• Copper (RJ45)
• 4 FE or GbE ports (License)
• Copper (RJ45) or Fiber (SFP)
• ETX-203AX FO user ports
enable demarcation for fiber
applications
Work mode
• Bridge + Flow
• Flow
• ETX-36 bridge Keeps local
traffic in customer network
and saves the need of
customer switch
OAM
• SW Based *
• 802.3ah
• 802.1ag
• HW based
• 802.3ah
• 802.1ag
• Y.1731
• ETX-203AX HW based OAM
enables more OAM sessions
with higher measurement
accuracy and faster fault
detection
QoS
• CIR only with 6 egress CoS
• CIR/EIR/CBS/EBS profiles
with 8 CoS
• Strict priority + WFQ
• Shaper per flow (192)
• 3-color 2-rate H-QoS
Mechanism with WRED
mechanism
• Enhanced classification
methods
• Enhances QoS of the ETX203AX Enables traffic
management with better
utilization of the network
resources for different
services as well as
oversubscription.
• Strict priority + WRR
• Shaper per egress port or
queue (6)
• Tail Drop
• Limited classification methods
* Y.1731 will only be supported in Q4/12
ETX-36 version 1 product presentation
ETX-36 / ETX-203AX
Comparison Table
ETX-36
ETX-203AX
Benefits
RFC 2544
• Not Supported
• Supported
• Enables service SLA
verification prior to the
service activation
Link
Aggregation
(LAG)
• Static Lag no LACP with load
balancing and Hash
mechanism
• 1:1 LAG with LACP
• G.8031 Linear protection
• LACP enables easy
interoperability with
different devices supporting
LAG
• Load balancing enables
bonding the two ports to a
single trunk of 2MB
G.8031 Linear
protection
• Not supported
•Supported
• Enables end-to-end service
protection
Power supply
• External AC (Plastic Enclosure)
• Internal AC or DC (Metal
Enclosure)
• Internal Wide-Range
(AC/DC) in Plastic
Enclosure
• Wide-Range PS enables
single device for both AC
and DC installation and
smaller inventory
PM Portal
• Not supported
• Supported
• Y.1731* parameters
Monitoring and report
generation
* Y.1731 will only be supported by the ETX-36 in Q4/12
ETX-36 version 1 product presentation
Value Proposition
Reduce CAPEX
• Single Device for local switching and Demarcation
• Cost optimized design
• MEF design for painless integration with Carrier Ethernet
network
Reduce OPEX
• Early fault detection using standard OAM
• Central management system with complete FCAPS
Increase Revenue
• Optimized customer service with prioritization of mission
critical services
ETX-36 version 1 product presentation
Thank You
For Your
Attention
www.rad.com
ETX-36 version 1 product presentation