Transcript EDG-ADAM457X

ADAM – 4570 / 71 / 77 / 79
Connect Your Serial Device
to Ethernet
Κώστας Γρηγορίου
Sales Engineer
Ιούνιος 26, 2007
EDG : Ethernet Data Gateway
 EDG
COM port:
– ADAM-4570/L/S
– ADAM-4571/L/S
– EDG 4504/4508/4516
 EDG
Serial:
– ADAM-4579
– ADAM-4577
Same Hardware
Different Firmware
Software Architecture
Windows 95/98/NT/2000/XP
User’s Program
4577/9
Open WinSocket
4570/1
Driver
Internet
EDG Hardware
Open Com port
What is ADAM-4577/9?

Empower serial devices to
access or be accessed in
Ethernet independent of any
O.S.

Serial devices handle data or
commands from/to RS232/422/485 over Ethernet.

Serial device communicate
peer-to-peer without host
PC over Ethernet.
EDG Serial family
Ethernet
RS-232/422/485
ADAM-4577
ADAM-4579
The Benefits of ADAM-4577/9

Any computing platforms can access existing serial
device through ADAM-4577/9 by Ethernet
standard protocol and without special driver
 Two serial devices can communicate with each
other peer-to-peer without intermediate host PC
 With ADAM-4579, one serial device can control
other devices actively by applying current RS232/422/485 AT commands
Network Architecture:Polling


The host PC polls
serial devices’ data
directly through
ADAM-4577/9
ADAM-4577/9 can be
applied with standard
Ethernet protocol in
most O.S. such as
Windows(winsocket),
Linux(sockets)
Request serial device to send data
Ethernet
Any O.S
(Windows,
Linux)
Internet
ADAM-4577/4579
Serial device: PLC, Barcode reader
Network Architecture:Event-handling

When Event/alarm
occurs on the connected
device, it can sent out the
data to the host PC via
Ethernet.
Event/alarm was actively sent to PC
Ethernet
Internet

Reduce the load and
increase the performance
of Ethernet and Host PC.
ADAM-4577/4579
Event/alarm occurs
Any O.S
(Windows,
Linux)
Network Architecture:Peer-to-peer

Data can be
sent/received between
two serial devices
directly to increase
the performance of
the whole system and
will save costs for
your project by
absence of PC.
Ethernet
Internet
ADAM-4577/4579
Data
Data
Without
any PC
Network Architecture:Controlling


ADAM-4579 provides
modem AT-style
commands to connect
to other serial devices
dynamically.
Save Host PC
programming effort
and increases the
performance for data
exchange.
Ethernet
Internet
ADAM-4579
Serial device
sends data to
networking
device 1
Serial device
sends data to
networking
device 2
H/W Specification of ADAM-457x
32-bit CPU &
Real Time O.S.
Polling, Event, Peer-topeer, Controlling
networking model
10/100 Mbps
Base-T
2 independent RS232/422/485 port
(79 only)
Speed up to
230 Kbps
Diagnostic LEDs
S/W Specification of ADAM-457x
Modem AT-style
command (79 only)
Data and
Control mode
High-security
Protection
Networking API:
WinSock, Socket
Remote download
firmware
Easy Selfdiagnostic
Features: Auto-detection

Auto-detection for all
ADAM4570/4571/4572/4579/
EDG-4504/08/16

Location Autodetection: Click
“Locate” button to
locate specified
ADAM-4579. The
specified ADAM4579’s LED will light
for 8 min.
Features: Self-diagnostic
Plug
in “Loop-back test connector” to the cable
Key-in
Click
the IP address
“Test” button to diagnose communication line,
includes Stop/Data bits, Parity, Baud rate.
RJ-45
Loopback tester
RJ48 to DB9
(male)
Features: Remote download firmware
Click
“Download FW” button to update new firmware
into ADAM-4579 remotely
Features: Data and Control mode
 Data
mode
Data from serial
device can be
automatically sent to
the other device
 Control mode
ADAM-4579 provides
commands for serial
device to connect to
different devices
dynamically
Target Market
Telecommunication
Building
Factory
Security
Transportation
Laboratory
•Complete Ethernet-enabled Solution
-Control from Ethernet or RS-232/422/485 interface
•Can be used in most O.S.
-Windows, Linux etc.
• Easy-to-use Windows-based utility
- Auto-detect, Remote download firmware,
security, Locate
Thank You