Transcript 2 - SVECOM

GAS / FLAME DETECTION
GAS / DUST MONITORING
YOUR ENVIRONMENT,YOUR SAFETY, LET ’S MASTER THEM TOGETHER
MX48 = 4 or 8
MX 15= single
channel
independant
channels
MX52 = 2 to 16 independant
MX32 = 2 independant
mixted channels
channels
WINGAS = 4 independant
channels
MX62 =
MX42A = 4
independant
channels
Up to
64 independant
channels
Measurement and alarm unit:
MX 15
MX 15:easy installation
• small-sized wall-mounted box
• For low cost installations
(boiler plants, battery
charging rooms…)
• DIN rail mounting…
Measurement and alarm unit:
MX 15
• Synergy with new detectors OLC(T)
10
• Can be linked either with a single
flammable detector (OLC10/OLCT10)
• Or can be linked with two flammable
detectors ( OLC10 TWIN)
• Or can be linked with one up to five
toxic transmitters OLCT10
( CO, NO, NO2).
Example of
wiring
arrangement
between MX15
and 3 -activewire- detector:
OLC10 or
OLCT10.
between MX15
and two flammable
detectors:OLC10
TWIN.
between MX15
and two toxic
transmitters
OLCT10.
MX 15 : user-friendly front panel
- LED visual
indications:
- ON/OFF
- AL1 and AL2
- Trouble
LCD display,
pictograms,
concentration,
type of gas and unit
indication
(programmable).
MX 15 :alarms and relays
• ALARMS :
• 2 independent
programmable
levels
• Increasing or
decreasing alarm
• Automatic or
manual, local or
remote
acknowledgement.
• RELAYS:
• 2 independent alarm
relays
• 1 fault relay
• Fail safe (energized)
or negative safety
• Free potentiel
contacts (2A/250ACV).
MX15 : simple operation
•
•
•
•
Keypad for using (menus):
initialization (1rst installation)
programming (of channel)
test (relays inhibited during
calibration)
• code (authorized people)
• buzzer (mode).
MX 32:easy installation
• small-sized wall-mounted box
• protected front face
• IP66 housing .
MX 32: relays
• Per channel:
• 1 independent relay for each
gas alarm (2)
• 1 common relay for troubles.
D
1
1
2
2
MX 32:keypad
•
•
•
•
•
•
maintenance menus:
initialization (1st installation)
channel programming
calibration (relays inhibited)
Code (authorized people)
buzzer ( local audible alarm).
MX 42A
• Wall-mounting housing:
easy to install
• 1 to 4 independent channels
MX 42A : ergonomic front panel
MX 42A:relays
COMMON BLOCK
D3
Channel 1 channel2 channel
1 2
1 2
1 2
3 channel 4
1 2
- per channel: 1 independent relay per instantaneous gas alarm (2)
- 1 common relay for the 3rd gas alarms (from each channel),
or for all the gas alarms
- 1 common fault alarm relay
MX 42A:analog outputs
COMMON BLOCK
Channel 1
2
3
4
- recorder or PLC or
data logging.
4 - 20 mA
+ - + - + - + Common
an independent 4-20 mA
output per channel.
ground
MX 42A: programming
MX 42A: maintenance
switches :
6
7
8
Maintenance switches
• Position 0 = OFF
• position 1 = ON
0
1
6
7
8
• 8 = on/off
• 7 = calibration
(flashing yellow LED and
alarm relay - inhibition)
• 7 + 6 = programming
(flashing yellow LED and
alarm relay - inhibition) .
Maintenance switches:
calibration
• 8 + 7 = : calibration
•
7
8
« 0 and Span »
setting with
potentiometers
KEYBOARD
• 8 : normal mode
Call on display
(for 1 mn)
• 7+6=
programming
- states
- values ...
+
Messages :
- AL1
- AL2
- AL3
- Point
- Time
WINGAS
MULTI-CHANNEL CONTROLLER
WINGAS
• WINGAS is a fixed controller :
• with a wall mounting housing IP 54
• for COMMERCIAL and INDUSTRIAL
markets.
WINGAS : 2 versions
• WINGAS DIGITAL: with display
• WINGAS : without display
WINGAS :multi-channel controller
• 4 channels
• 1 transmitter 4/20 mA 2 or 3 wires per
channel
• specific case : up to a maximum of 5
transmitters CO 4/20 mA 2 wires
• No explo bridge detector
.
WINGAS : configuration
CASING
FRONT
PANEL
6
fils
123456
Display Pcb
MAIN
Pcb
Vers boîte
relais
WINGAS : ALARMS
• 2 GAS alarms per channel
COMMON FAULT ALARM
WINGAS :
on-board RELAYS
• 2 GAS alarm common relays
• 1 buzzer copy common relay
• 1 FAULT alarm common relay
WINGAS: FRONT PANEL
Gas alarm lamps
On/off lamp
Fault lamp
Acknowledgement Maintenance button
button
Display
(digital version )
WINGAS DIGITAL
• Only in the case of a WINGAS DIGITAL we can
connect a remote box fitted with 8 relays
• Each gas alarm AL1 and AL2 of WINGAS
DIGITAL will then drive 2 remote relays AL1 and
AL2.
REMOTE BOX
• The remote box is connected to the wingas
digital with a 6 wire cable : max. length =
30m (0.9mm2).
to wingas digital
WINGAS NETWORK
Network: up to 32 WINGAS maximum
WINGAS NETWORK
• The network WINGAS RS 485 is driven by
a software: WINGASCOM
• It allows to visualize and program the
different WINGAS connected to the
network
MX 48
• Metal wall- mounting
housing
• 4 to 8 independent
channels.
MX 48 : presentation
• BUS/MICRO/display
card
• common block
• 2 cards (4 channels per
card)
MX 48:
front panel
• AL 1 and AL2 = instantaneous alarms
• AL 3 = delayed or averaged alarm
MX 48 :relays
- 2 common relays
(Al3 and faults)
- 2 relays (Al1/Al2)
per channel
channels 1 to 4
5 to 8
Analog outputs: 4 to 20 mA
-an independent 4 /20 mA
output per channel :
to recorder, PLC ....
communications: RS 232 and RS
485
COMMUNICATION
COM 52
< <
< <>
RS 232<
< < <
>
RS 485
>>
SUPERVISION
MX 48 : maintenance
• with push-buttons :
• calibration
• programming
MX 52
- rack 3U/19 inc.
- 2 to 16 channels ( features of MX 48 = MX 52 ).
MX 52 : configuration
MX 62
• a safety system ...