Transcript SC101T presentation

Storage Central
SC101T
Presented by Montelle Kline
February 1, 2007
True SAN (Storage Area Network)
» Sharable, Expandable, Fail-Safe storage accessible by all PCs on
your network
» With Storage Central you can add the capacity you need to store,
share and back up your valuable digital content—-music, games,
photos, videos, and office documents—instantly, easily, and securely,
all with the simplicity of your C:\ drive. SATA drives sold separately.
» Disks attached through the SC101T appear and function as normal
disk drives on multiple PCs.
• You cannot format the drives with your Windows Disk
Management software or the DOS “Format” command
© .1996-2006 NETGEAR® . All rights reserved
2
SAN versus NAS, what’s the difference?
NAS
(Network-Attached Storage)
SAN
(Storage Area Network)
Almost any machine that can connect to the LAN (or is
interconnected to the LAN through a WAN) can use
NFS, CIFS or HTTP protocol to connect to a NAS and
share files.
Only Clients or PC with SCM Utility can access the file
system.
A NAS allows greater sharing of information especially
between disparate operating systems such as Unix and
NT.
File Sharing is operating system dependent and does
not exist in many operating systems.
Backups and mirrors are done on files, not blocks, for a
savings in bandwidth and time. A Snapshot can be tiny
compared to its source volume.
Backups and mirrors require a block by block copy, even
if blocks are empty. A mirror machine must be equal to
or greater in capacity compared to the source volume.
A SAN addresses data by disk block number and
transfers raw disk blocks.
NTFS & FAT file system
SAN File System
© .1996-2006 NETGEAR® . All rights reserved
3
Features
» Mirroring
• 2 partitions (on separate drives) are duplicates of each other.
• If one drive should fail, the data would still be safe on the other drive.
» Spanning
• Combining multiple partitions to appear as a single drive. (Also supported across
multiple SC101T’s.)
» PC disk backups
• SmartSync backup software bundled with unit. ($30 value)
• Local PC disks are synchronized as needed.
» Gigabit Ethernet connection
• Incorporates a Gigabit Ethernet connection to enhance network performance
» Uses SATA drives
• Uses SATA drives instead of PATA drives to enhance network performance
© .1996-2006 NETGEAR® . All rights reserved
4
System Requirements
» At least one Pentium class computer (or equivalent) with the TCP/IP
protocol installed on a wired Ethernet adapter and a CD-ROM drive
(Gigabit Ethernet connection recommended)
» An Ethernet network with a DHCP Server
»
»
»
»
Windows 2000 with Service Pack 4
Windows XP Home Service Pack 1 and 2
Windows XP Pro Service Pack 1 and 2
Windows 2003 Server
» NO Macintosh & Linux support (firmware 1.08)
» NO Vista Support (SCM software 2.0.16) (Support Pending)
» At least 1 Hard Drive (sold separately)
• SATA (Serial ATA)
• 1” height, 3.5” wide
© .1996-2006 NETGEAR® . All rights reserved
5
SC101T Security methods
» Storage Central Management (SCM) Utility
• Requires to create & delete drive partition
• Requires to attach & detach drive partition
• Requires to modify partition
» Partition sharing
• Allows multiple & simultaneous access to the SC101T partition
• Unshared partition will only be accessible by 1 user at a time
» NOTE: SC101T does NOT handle user-level file authentication,
file encryption, or file access rights.
© .1996-2006 NETGEAR® . All rights reserved
6
Package Contents
»
»
»
»
Storage Central SC101T
12V, 7A Power adapter and cord (localized for country of sale)
Ethernet Cable
Resource CD for the SC101T – Setup Wizards
• Soft copy of the Installation Guide
• Storage Central Manager Software
» Includes the UT.exe DOS based CLI for troubleshooting
» SmartSync Pro Backup Software CD
» Printed Installation Guide
» Printed Support/Warranty Information card
© .1996-2006 NETGEAR® . All rights reserved
7
SC101T CD Initial Version 1.0
» Resource CD
• Contains the
Software Required
for Installation
• Each PC must have
this software
installed to access
the SC101T hard
drives
• Autorun.exe
• Install Guide
• Users Manual
© .1996-2006 NETGEAR® . All rights reserved
8
SC101T
© .1996-2006 NETGEAR® . All rights reserved
9
Angled View
» Internal, aluminum chassis
holds the drives
» Internal top mounted fan
keeps drives cool
» Plastic outer housing
» Rubberized feet
» Internal SATA HD
connections for easy HD
install
© .1996-2006 NETGEAR® . All rights reserved
10
Front Panel
» 3 LEDs
• Power
• Hard Drive
• Ethernet
» Front panel slides off for
drive access (no tools
required)
© .1996-2006 NETGEAR® . All rights reserved
11
Rear Panel
» 1000 Mbps (gigabit), Auto
sensing, Auto Uplink, RJ-45
Ethernet jack
» Reset Button
» Power Button
» Quick release drive latches
» Power plug
• 12V, 7A
• External power brick
» There are NO physical
security safeguards.
• No lockdown ports
© .1996-2006 NETGEAR® . All rights reserved
12
Setup Procedure
1.
2.
3.
4.
5.
6.
7.
8.
Open the SC101T front cover
Install the drive(s) into the SC101T chassis
Plug in the SC101T power cord and adapter
Plug the SC101T to the network with the Ethernet cable
1. There must be a DHCP server on the network
Boot up the PC
1. PC must be within the same subnet as the SC101T
Power on the SC101T with the power button
Insert the Resource CD
Run the Setup Wizard
© .1996-2006 NETGEAR® . All rights reserved
13
Remove the Front Cover
» The SC101T should
be powered OFF (or
unplugged)
» Slide the front cover
upwards until it
detaches
© .1996-2006 NETGEAR® . All rights reserved
14
Install the Drive(s)
» Slide the drive(s) into the slots.
• Either side for a single drive
» Vertical orientation has no
effect on the performance of
the drive(s).
» SATA connector at the rear will
hold the drive(s) in place.
© .1996-2006 NETGEAR® . All rights reserved
15
Re-attach the Front Cover
» The SC101T should
be powered OFF (or
unplugged)
» Slide the front
cover down until it
attaches
© .1996-2006 NETGEAR® . All rights reserved
16
Connect the Ethernet cable
» Connect the provided
Ethernet cable to your
network and to the back of
the SC101T.
© .1996-2006 NETGEAR® . All rights reserved
17
Powering on the SC101T
» Plug in the adapter to a
power source and plug the
other end into the back of
the SC101T.
» Turn on the SC101T using
the On/Off button.
© .1996-2006 NETGEAR® . All rights reserved
18
LED Behavior: Front Panel LED’s
© .1996-2006 NETGEAR® . All rights reserved
19
LED Behavior: Rear Panel
© .1996-2006 NETGEAR® . All rights reserved
20
Basic Network Diagram
» The SC101T is NOT a wireless device.
» The recommended setup procedure is to use a wired PC to
configure/modify the SC101T
© .1996-2006 NETGEAR® . All rights reserved
21
Software Installation
» Autorun.exe
» Installs:
• Storage Central Manager
• UT.exe
» Windows PCs Only
• Windows XP Home SP1/2
• Windows XP Pro SP1/2
• Windows 2000 SP4
• Windows 2003 Server
© .1996-2006 NETGEAR® . All rights reserved
22
Insert CD to Install the Software
» Storage Central Manager
(SCM)
• Required by all PCs that
wish to use the SC101T
hard drives as a letter
drive
» UT.exe
• Installed in the Install
Directory
• Default Location:
C:\Program Files\Netgear\Netgear Storage
Management utility
© .1996-2006 NETGEAR® . All rights reserved
23
Smart Wizard Installation Wizard
© .1996-2006 NETGEAR® . All rights reserved
24
Check for Updates / Install From CD
» Check for Updates if
the Internet is
accessible from the
LAN subnet
(Recommended)
» Otherwise Install
from CD
© .1996-2006 NETGEAR® . All rights reserved
25
Checking for Updates – No New Software Available
» Click Continue
© .1996-2006 NETGEAR® . All rights reserved
26
InstallShield Wizard
© .1996-2006 NETGEAR® . All rights reserved
27
End User Licensing Agreement (EULA)
© .1996-2006 NETGEAR® . All rights reserved
28
Setup Type
» Complete
• Recommended
Installation options
» Custom
• Change the
installation directory
© .1996-2006 NETGEAR® . All rights reserved
29
Ready to Install the Program
© .1996-2006 NETGEAR® . All rights reserved
30
Setup Status
© .1996-2006 NETGEAR® . All rights reserved
31
Installation Information
© .1996-2006 NETGEAR® . All rights reserved
32
Continue Anyway
© .1996-2006 NETGEAR® . All rights reserved
33
Hardware Installation
» SCSI
• Small Computer
System Interface
• High speed HDD
interface
• SCSI over IP based
technology is common
to Storage Area
Networks
© .1996-2006 NETGEAR® . All rights reserved
34
Windows (XP) AntiSpyware Notice
» This warning may
come up if the
Windows Antispyware
software is running on
the PC.
» Allow must be clicked
to continue the
Installation
© .1996-2006 NETGEAR® . All rights reserved
35
Finish
» Click Finish to
complete the
software installation
© .1996-2006 NETGEAR® . All rights reserved
36
Register
» Click View the
combined
SC101/T manual.
» Click Quit to
finish the
installation
© .1996-2006 NETGEAR® . All rights reserved
37
Storage Central Manager Utility
» A shortcut to the Storage Central Manager
(SCM) Utility will be installed on the
Desktop
» Double-click the icon to run the SCM Utility
© .1996-2006 NETGEAR® . All rights reserved
38
Smart Wizard - Storage Central Manager
» Automatic
scanning on
startup
© .1996-2006 NETGEAR® . All rights reserved
39
Rescan Network
» Rescanning the
network several
times is sometimes
necessary if the
SC101T is still
booting up or
trying to get an IP
address from the
DHCP server.
» If there are existing
SC101 devices
using firmware
4.22.13 (or later)
they will also be
detected
© .1996-2006 NETGEAR® . All rights reserved
40
Check for Software Updates
» SC101T device(s)
detected
» If there are existing
SC101 devices
using firmware
4.22.13 (or later)
they will also be
detected
© .1996-2006 NETGEAR® . All rights reserved
41
Update Internet Failure Messages
» Update attempts
when there is NO
Internet connection
» Click the X to
cancel the update
attempts
© .1996-2006 NETGEAR® . All rights reserved
42
If there are no updates
© .1996-2006 NETGEAR® . All rights reserved
43
We want users to update to the latest updates
Updates are HIGHLY recommended.
Reasons to update:
» Data reliability
» Data integrity
» Data security
© .1996-2006 NETGEAR® . All rights reserved
44
Configuration Mode
» Wizard
(Recommended
especially for first
time HDD
installation)
» Advanced
Configuration
© .1996-2006 NETGEAR® . All rights reserved
45
Wizard Options
» Create a new drive
» Manage an existing
drive
» Attach drives
Terminology:
» Disk = physical disk
» Drive = partition
© .1996-2006 NETGEAR® . All rights reserved
46
Selecting a Hard Drive for Configuration
» All available
SC101T HDDs are
shown (Also SC101
HDDs if running FW
4.22.13 or later)
» Select from the list
and click Next
© .1996-2006 NETGEAR® . All rights reserved
47
Create a New Drive
» Name the drive
(aka partition)
» Allocate a size in GB.
• Must be equal to or
less than the
available free space.
» Each drive will get an
IP from the DHCP
server.
» Click Next to continue.
© .1996-2006 NETGEAR® . All rights reserved
48
Mirroring – Requires 2 Hard Drives in the SC101T
» Selecting Yes with
no second drive
returns the
following error
message.
» Mirroring across
multiple SC101Ts is
not supported.
© .1996-2006 NETGEAR® . All rights reserved
49
Mirroring
» Select No for
enable mirroring
» Click Next to
continue
© .1996-2006 NETGEAR® . All rights reserved
50
Mirroring Should Be Done During the Initial Setup
» Drive must be
deleted and
recreated to
configure mirroring
• All data on the
drive will be lost.
© .1996-2006 NETGEAR® . All rights reserved
51
Password Protection Disabled
© .1996-2006 NETGEAR® . All rights reserved
52
Sharing Disabled
© .1996-2006 NETGEAR® . All rights reserved
53
Sharing Enabled
© .1996-2006 NETGEAR® . All rights reserved
54
Configuration Summary
© .1996-2006 NETGEAR® . All rights reserved
55
Configuration Warning
» Warning that
operation will
format drive, if
previously
formatted on a PC
all data will be lost.
© .1996-2006 NETGEAR® . All rights reserved
56
Status: Elapsed Time – 25 Seconds
© .1996-2006 NETGEAR® . All rights reserved
57
Status: Elapsed Time – 30 Seconds
» If Allocation takes longer than 2 minutes, reboot the PC.
» Using the UT.exe utility to see if any disks were created that
may be using up some disk space.
» Remove the disk using the remvpart command
© .1996-2006 NETGEAR® . All rights reserved
58
Advanced Troubleshooting – UT.exe
» Installed in C:\Program Files\NETGEAR\Storage Central Manager
Utility
• Type: ut <enter> for Commands and syntax
© .1996-2006 NETGEAR® . All rights reserved
59
UT Command: ut listall
A
B
C
© .1996-2006 NETGEAR® . All rights reserved
» A: Root drive with IP
192.168.1.5 has 1
partition
» B: Corresponding IP
address for root
drive
» C: Partition IP
address on Root
drive Seagatedisk1
60
UT Command: ut remvpart
•Reboot the SC101T to complete the removal process.
•Reboot any PC that may be using this drive to reset the letter
drives.
Note: UT Manual to be posted on the website
© .1996-2006 NETGEAR® . All rights reserved
61
Status: Allocating space
© .1996-2006 NETGEAR® . All rights reserved
62
Status: Formatting…
© .1996-2006 NETGEAR® . All rights reserved
63
Letter Drive Created Successfully
© .1996-2006 NETGEAR® . All rights reserved
64
Status: Completed
© .1996-2006 NETGEAR® . All rights reserved
65
What do you want to do next?
» Additional
partitions can be
created by running
the setup wizard
again
» Select Advanced
Configuration and
click Next
© .1996-2006 NETGEAR® . All rights reserved
66
Advanced Configuration
© .1996-2006 NETGEAR® . All rights reserved
67
Check Storage Central Status
© .1996-2006 NETGEAR® . All rights reserved
68
Advanced Configuration Options Menu
© .1996-2006 NETGEAR® . All rights reserved
69
Create/Manage Existing Drives Configuration Screen
» See all the drives
configured
» See the drive letters
» See available drive
space
© .1996-2006 NETGEAR® . All rights reserved
70
Create Drive
» Click Create Drive
» Click in each field
and fill in the data
» Change Password
to “Yes” for new
drive. Old
Password field
cannot be modified
for a new drive.
» Click Create Drive
to continue
© .1996-2006 NETGEAR® . All rights reserved
71
Create Drive – Mirroring Warning
© .1996-2006 NETGEAR® . All rights reserved
72
Create Drive - Summary
© .1996-2006 NETGEAR® . All rights reserved
73
Create Drive – Status Indicators
© .1996-2006 NETGEAR® . All rights reserved
74
New Drive Shows in List
© .1996-2006 NETGEAR® . All rights reserved
75
Changing the Storage Central Name
© .1996-2006 NETGEAR® . All rights reserved
76
Change Hard Disk Name
© .1996-2006 NETGEAR® . All rights reserved
77
Change Hard Disk Name
© .1996-2006 NETGEAR® . All rights reserved
78
Successful Name Change
© .1996-2006 NETGEAR® . All rights reserved
79
View/Attach Available Drive
© .1996-2006 NETGEAR® . All rights reserved
80
View/Attach Available Drive
© .1996-2006 NETGEAR® . All rights reserved
81
Change Admin Password
© .1996-2006 NETGEAR® . All rights reserved
82
Password Fields – Default password: password
© .1996-2006 NETGEAR® . All rights reserved
83
Admin Password Changed Successfully
© .1996-2006 NETGEAR® . All rights reserved
84
Firmware Upgrade
© .1996-2006 NETGEAR® . All rights reserved
85
Firmware Upgrade
© .1996-2006 NETGEAR® . All rights reserved
86
Upgrade in Progress
© .1996-2006 NETGEAR® . All rights reserved
87
Successful Firmware Upgrade
© .1996-2006 NETGEAR® . All rights reserved
88
Managing broken mirror/drive
© .1996-2006 NETGEAR® . All rights reserved
89
Managing broken mirror/drive
» When one half of a
mirrored set is
unreachable, a
popup notification
will appear
© .1996-2006 NETGEAR® . All rights reserved
90
Removing broken mirror/drive
» Once a mirrored set
is broken it cannot
be restored, so you
will need to remove
the broken mirror
© .1996-2006 NETGEAR® . All rights reserved
91
Removing broken mirror/drive confirmation
© .1996-2006 NETGEAR® . All rights reserved
92
Changing a Drive Name
» Changing a drive
name is located
under the
Create/Manage
drives
© .1996-2006 NETGEAR® . All rights reserved
93
Changing a Drive Name - (Create/Manage Drives)
1
2
3
© .1996-2006 NETGEAR® . All rights reserved
94
Password Request - (Create/Manage Drives)
» During the first
change a password
confirmation will be
requested
» The password
request will only be
required once per
session
© .1996-2006 NETGEAR® . All rights reserved
95
Password Confirmation - (Create/Manage Drives)
© .1996-2006 NETGEAR® . All rights reserved
96
Changing a Drive Name - (Create/Manage Drives)
© .1996-2006 NETGEAR® . All rights reserved
97
Status: Modifying…
© .1996-2006 NETGEAR® . All rights reserved
98
Status: Modifying…
© .1996-2006 NETGEAR® . All rights reserved
99
Successful Name Change
© .1996-2006 NETGEAR® . All rights reserved
100
Adding Capacity - (Create/Manage Drives)
1
6
2
5
3
4
© .1996-2006 NETGEAR® . All rights reserved
101
Status: Modifying…
© .1996-2006 NETGEAR® . All rights reserved
102
Status: Size change successful…
© .1996-2006 NETGEAR® . All rights reserved
103
Status: Size change successful
© .1996-2006 NETGEAR® . All rights reserved
104
Changing the Drive Password
1
2
4
5
3
© .1996-2006 NETGEAR® . All rights reserved
105
Status: Modifying…
© .1996-2006 NETGEAR® . All rights reserved
106
Status: Password changed successfully…
© .1996-2006 NETGEAR® . All rights reserved
107
Status: Password changed successfully
© .1996-2006 NETGEAR® . All rights reserved
108
Resetting the Drive Password
1
2
4
5
3
© .1996-2006 NETGEAR® . All rights reserved
109
Status: Password Modifying…
© .1996-2006 NETGEAR® . All rights reserved
110
Status: Password reset successfully…
© .1996-2006 NETGEAR® . All rights reserved
111
Status: Password reset successfully
© .1996-2006 NETGEAR® . All rights reserved
112
Default Settings
» Firmware Version: 1.08
» Password: password
» Default IP address: DHCP assigned
© .1996-2006 NETGEAR® . All rights reserved
113
Initial Hard Disk Compatibility List
» To Be Posted on the website
• Known compatible
• Known incompatible
© .1996-2006 NETGEAR® . All rights reserved
114
Support Information (hardware specs)
»
»
»
»
1 Year Warranty (NA)
Serial number prefix: 1H9
Original Device Manufacturer: Zetera
Power Supply
• 100-240 V, 50-60 HZ 1.5A (input) AC power source
© .1996-2006 NETGEAR® . All rights reserved
115
Support Information (factory defaults)
© .1996-2006 NETGEAR® . All rights reserved
116
Smartsync Pro Install
» During initial
install Smartsync
Pro software
ReadMe will say
30-day demo
version
© .1996-2006 NETGEAR® . All rights reserved
117
Smartsync Pro Install
» During Smartsync
Pro install the
user will need to
enter their SC101
serial number.
» Once a correct
serial number is
entered, the
software will
become a “single
user license”
© .1996-2006 NETGEAR® . All rights reserved
118
SC101 & SC101T
Comparison
Presented by XXXX
SC101 and SC101-T Comparison
Network interface
Disk interface
Installation
© .1996-2006 NETGEAR® . All rights reserved
SC101
SC101T
Fast Ethernet
Gigabit Ethernet
Parallel ATA
Serial ATA
Requires manual connection
of power and data cables
during installation
Automatic connection of
power and data upon disk
insertion
120
Creating Volumes Across Enclosures
» Netgear SCM will create
volumes across similar
enclosures only
• SC101 & SC101
• SC101T & SC101T
+
» It is not possible to create any
volumes across different types
of enclosures
+
© .1996-2006 NETGEAR® . All rights reserved
121
Upgrading
» SCM and firmware is being updated
• SC101T firmware is new and used for SC101T only
• SC101 firmware is updated and used for SC101 only
• SCM is updated and used for SC101T and SC101
» SC101T customers will receive updated SCM so they will need to upgrade
existing SCM computers, if any
» All customers should upgrade using standard process (open SCM, download
upgrade, etc.) – upgrade software first, then upgrade firmware
» Users with multiple computers need to upgrade all computers that are using
SC101 or SC101T
© .1996-2006 NETGEAR® . All rights reserved
122
SCM/Firmware compatibility
SC101 Communication
OLD SCM
(1.5.7)
NEW SCM
(2.0.16)
OLD F/W (4.19.0)
NEW F/W
(4.22.13)
OLD SCM (1.5.7)
P
O
NEW SCM (2.0.16)
O
P
OLD F/W (4.19.0)
P
O
NEW F/W (4.22.13)
O
P
SC101T Communication
NEW F/W (1.08)
OLD SCM (1.5.7)
NEW SCM (2.0.16)
© .1996-2006 NETGEAR® . All rights reserved
O
P
123
Questions
?
© .1996-2006 NETGEAR® . All rights reserved
124