Transcript HPLL Demo

HPLL Demo
How did we get here?
• Brainstormed how we would utilize the WAN
• Talked with TEACH about our plan
• Presented this idea to the TRITON Board
• Converted the WAN to HPLL
• Met with the TRITON Tech Coordinators with
Scott Schwartz from AT&T
How did we get here?
• Presented the Polycom pricing to the
TRITON Board
• Ordered the Polycom units
• Configured the Polycom units
• Tested the HPLL WAN
HPLL Configurations
Blue Box
Port 4 or 7 on the outside of the
blue box
1 x 1 Straight through HPLL WAN
1 X 1 through a local network
1 X 1 through a local network
Security??
• The WAN is an open connection
• An option would be installing a firewall
• Another option is VLAN
1 X 1 local network firewall
Multiplexing with a VSX 7000
1 X 3 Connection through the MCU
(State Wide Scheduler)
Internet Connection
Configuring the Polycom units
• Language setting
• Country setting
• Give the unit a name (CESA 8)
• Add in the IP address (10.184.10.50)
• Add the Gateway address (10.184.10.49)
• Add the Subnet address (255.255.255.248)
Configuring the Polycom units
• Change Quality of Service Settings
•
•
•
•
•
•
•
•
•
System
Admin Settings
Network
IP
Quality of Service
Next
Uncheck Dynamic Bandwidth
Set Maximum Transmit Bandwidth to 384
Set Maximum Receive Bandwidth to 384
Any Questions?