Transcript NS1000 V2.0 Summary20130311

NS1000 Version 2.0
Summary
NS1000 Product Overview with Version 2
NS1000 is IP based communication system with the functionality and operability of
current system (NCP/TDA/TDE).
Expandability
Terminals
Scalable up to
640 SIP
terminals
Expand NT
capacity
128-＞256
Up to 256 SIP
trunks
Existing / New
IP terminals
Use of existing
Legacy
environment
Mobility
solutions
Networking
Up to 16 sites
Reliability
- Network
survivability
Backward
Compatibility
Use of NT/ DT
series
Proprietary
Telephones
Use of existing
NCP/TDE
options
Remote Easy
setting for
SIP-MLT
Unified
Communications
Built in Unified
Messaging
Voice Mail to
the desktop
Fax to the
desktop
Maintenance
Web based
programming
tool for
anywhere
maintenance
Centralised
upgrades for
UT terminals
DSP
monitoring to
ensure peak
performance
*From Version 2
•Flexible Configuration using SIP/IP Trunks and Terminals
•Fax and Interactive Voice Processing
•New high quality voice terminals
•Multiple site deployment
•Integrated Unified Messaging
•Application rich
2
Version2 Key Enhancement
1
Legacy Gateway
- A legacy Gateway is used to expand the legacy interface capacity of NS1000.
(PRI Line, BRI Line, Analogue Line, SLT, DPT, Legacy CS, etc.)
- KX-TDA/TDE/NCP are used as a legacy gateway by stacking connection.
2
New Terminal IP-PT and SIP based telephone
- IP-PT [KX-NT5xx series]
- SIP based telephone [KX-UT248 / UT670]
3
One look Networking Survivability
- Even if the master NS1000 and slave NS1000 cannot communicate each other,
the system can be used by backup settings (structure).
4
Remote Easy setting for SIP-MLT
- By using external SBC (session border controller), we will realize a connection
(NAT traversal) with remote terminals.
5
Expand NT phone capacity
- NT phone (IP-PT) capacity expand from 128 to 256 for telephone heavy user.
3
1. Legacy Gateway (1)
1. Overview
A legacy Gateway is used to expand the legacy interface capacity of NS1000.
(PRI Line, BRI Line, Analogue Line, SLT, DPT, Legacy CS, etc.)
Legacy Gateway
NS1000 as stacking master unit
KX-TDE or TDA or NCP as stacking Slave Unit
Legacy
Trunks/Terminals
Stacking Master card
Stacking
Slave card
Dedicated Cable
or
Legacy
Trunks/Terminals
Stacking
Slave card
IPCMPR card should be removed to
install the stacking slave card.
Legacy Gateway is connected to the KX-NS1000 with a dedicated cable
(Max. 2m) connected to the Stacking Master/Slave card.
“Stacking Master” card is required to be installed to the KX-NS1000, and “Stacking Slave”
card is required to be installed to the legacy gateway.
(By only replacing the IPCMPR card to the stacking slave card, the existing system can be used.)
Maximum of 2 legacy gateways can be connected to one KX-NS1000. Legacy.
The maximum number of Legacy Gateways are 8 units in the One-look Network. (Max. 8 sites)
4
1. Legacy Gateway (2)
2. Background
Replacement demand : Target customer -> Existing KX-TDA/TDE/NCP users
IP migration from TDM system by minimizing new investigation
Make opportunity to knock the Panasonic users.
Usage Example as a Legacy ‘DECT’ gateway
Stacking Master card
Type of gateway should be same for each NS1000.
Category1: NCP500 /NCP1000
Category2: TDE100/200, TDA100/200
Category3: TDE600/620, TDA600/620
Dedicated Cable
KX-NCP500
as a DECT GW
KX-TDA15/30/50/100D cannot use as a legacy gateway.
Stacking Slave card
Telephone Line
DECT CS (KX-TDA0158)
->Legacy (DPT) interface
DECT PS
Easy Installation
“Air Synchronisation” is NOT needed.
5
1. Legacy Gateway (3)
3. Stacking Cards
For KX-NS1000 (Stacking Master)
Model
Symbol
Name
KX-NS0130
STACK-M
Stacking Master Card
Description
Remark
- Interface card for Legacy-GW
- Proprietary Interface x 2 ports
For KX-TDA/TDE/NCP (Stacking Slave)
Model
Symbol
Name
Description
Remark
KX-NS0131
STACK-S
Stacking EXP Card for
KX-NCP
Legacy-GW Control Unit for
KX-NCP
With Dedicated
Stacking Cable
KX-NS0132
STACK-S
Stacking EXP Card for
KX-TDA/TDE
Legacy-GW Control Unit for
KX-TDA/TDE
With Dedicated
Stacking Cable
KX-NCP example
KX-TDE example
STACK-M
STACK-S
- Insert to
the MPR Slot
Stacking Slave #2
- Insert to
the free Slot
STACK-S
- Insert to
the Bus Slot
KX-NCP
Stacking Slave #1
KX-TDE620
Stacking Slave #2
KX-TDE600
Stacking Slave #1
6
2-1. IP Proprietary Telephone (IP-PT)
New IP-PT : KX-NT5xx series (based MGCP)
Design is based on UT series and Key arrangement is based on NT series.
SP-Phone key is placed lower right.
Frequently used key (Transfer, Hold, Redial) are placed on bottom line.
KX-NT560
- 4.4 inch monochrome LCD
- Paper label free (Self labeling : 32=8 x 4pages)
- Full-duplex SP-phone
- 1GbE ports, PoE Class3
- Built-in Bluetooth for Headset
KX-NT546
KX-NT543
- 6-line LCD
- 3-line LCD
- 24-Flexible CO key
- 24-Flexible CO key
- SP-Phone
- SP-Phone
7
2-2. SIP based Phone Telephone (UT248)
KX-UT248
Standard
•
•
•
•
•
•
•
•
•
•
•
General office users
Compatible with new Panasonic IP-PBX,
Asterisk and Broadsoft
4.4 inch monochrome LCD
Paper label free (Self labeling)
High quality wideband voice (Handset,
Headset and Speaker phone)
3-way conference call
XML
Built-in Bluetooth for headset
EHS (Electric hook switch) for
Plantronics
2 * 1GbE ports, PoE
Green (Low standby power
consumption)
8
2-3. SIP based Phone Telephone (UT670)
KX-UT248
KX-UT670
SMART DESK PHONE
•
•
•
•
•
•
•
•
Executives and Vertical markets
Compatible with new Panasonic IP-PBXs
and Asterisk
7-inch touch screen
Programmable (JAVA, HTML and
Adobe flash)
High quality wideband voice (Handset,
Headset and Speaker phone)
High quality video (H.264 / 720P)
2 * 1GbE ports, PoE
Green (Low standby power
consumption)
9
3. Networking Survivability (1)
1. Backup Master
One of the slave units can become “Backup Master (Temporary Master)”, while the
master unit or the network connected to the master is down.
(The backup master can control the slave units instead of the master unit while the master unit is down)
Head Office
Master Unit
PTSN
2. A trouble occurs.
1. Usually, the slave communicates with
the master unit.
PTSN
Branch Office
IP
Network
PTSN
Branch Office
Slave Unit
Backup Master
Slave Unit
3. The slave unit can communicate with the
“Backup Master” and run nearly completely,
while the slave can not communicate with
the master.
10
3. Networking Survivability (2)
2. Isolated Mode
Each slave unit can run by itself with some limitations, while the slaves can not
communicate with neither the master or backup master.
(The slave can become an independent system to serve trunks and extensions connected to its own cabinet.)
Head Office
Master Unit
PTSN
1. A trouble occurs.
PTSN
Branch Office
IP
Network
PTSN
Branch Office
Slave Unit
Backup Master
Slave Unit
2. The slave unit can run by itself
with some limitations.
11
3. Networking Survivability (3)
3. Automatic Rerouting to Secondary PBX
IP-Telephone (KX-NT/UT series) try to register to the primary PBX first of all.
If they cannot register to the primary PBX, they try to register to the secondary PBX.
Branch Office
Slave Unit
Primary PBX for the IP-Telephone
1. Usually, the IP-Telephone communicates
with the Primary PBX.
IP
Network
2. A trouble occurs.
Secondary PBX for
the IP-Telephone
Head Office
Master Unit
3. The IP-Telephone communicates
with the Secondary PBX.
The feature is slightly differ from that you knew same feature for TDE/NCP.
12
4. Remote Easy setting for SIP-MLT
Easy remote setting
By using external SBC (session border controller), we will realize a connection
(NAT traversal) with remote terminals.
Remote side
TEL1
Branch Office
Local
FIX Global IP
Global
G
G
Router
Head Office
Local
Global
SIP Message
RTP
TEL3
G
G SBC
G
External SBC (Router)
Remote side
TEL2
3rd Party (Media5 / Comdasys)
Branch Office
Global
Local
Router
G
G
Global
Local
Global IP Address
Local IP address
It is not necessary to set up broadband
router at remote side.
13
5. Maximum Extensions
The NS1000 supports the following number of extensions.
Stand-alone
Stacking system
(without Legacy Gateway)
(Single NS1000)
Main unit
Extension(ch)
Main
unit
1NCP
1TDE/TDA100
1TDE/TDA 200
1TDE/TDA 600
2NCP
2TDE/TDA 100
2TDE/TDA 200
2TDE/TDA 600
One-look
Network
640
640
1000
640
640
1000
IP-PT
256 *1
256 *1
256 x N *2
(Upper limit 1000)
SIP
640
640
1000
SIP Phone
640
640
1000
KX-UT series
640
640
1000
S-PS
255
255
255
IP
Legacy *3
2
0
44/160/256/304
88/320/512/608
1000
SLT
2
0
36/96/128/240
72/192/256/480
1000
DPT
0
0
40//128/256/256
80/256/512/512
1000
*1 Software version of the NS1000 should be 2.0 or later. If the software version is 1.x, the maximum number is 128.
*2 N: The number of Sites (N>=2)
*3 If User uses DXDP, the maximum number depends on the gateway system. (Legacy gateway is version 2 feature)
14
Thank you !
The END
[Note]
Would you please inquire the precise sales date to your sales company.
Thank you very much.
15