Transcript HP Discover presentation

HP Discover 2012
TB#3258: The benefits and right
practices of 10GbE networking with
VMware vSphere 5
June 6, 2012
2:45PM
Agenda
The Transition…
What’s new with VMware vSphere 5
The design considerations
Deployment scenarios
Summary
© 2012 Emulex Corporation
2
The Transition
 A website focused on technical
content
 A consortium of technical
whitepapers of actual work done in
Emulex Labs or Partner Labs
 A resource for how-to content,
blogs, application notes, technical
videos and technical webcast
recordings
 Recently selected as one of the
Best Technical websites by Network
Products Guide – May 2012
© 2012 Emulex Corporation
4
Ethernet Physical Media
Mid 1980’s
Mid 1990’s
Early 2000’s
Late 2000’s
10Mb
100Mb
1Gb
10Gb
UTP Cat 3
UTP Cat 5
UTP Cat 5
SFP Fiber
SFP+ Cu, Fiber
X2, Cat 6/7
Technology
Cable
Distance
Power
(each side)
SFP+ Direct Attach
Twinax
< 10m
~0.1W
~0.1ms
SFP+ SR
short reach
MM 62.5mm
MM 50mm
82m
300m
1W
~0
© 2012 Emulex Corporation
Transceiver
Latency (link)
5
10GbE PHY Standards
10GBASE-
Media
Reach
Module Cost
LR
SMF
10km
High
SR
MMF
26m*
Medium
LX4
MMF/SMF
300m*
High
CX4
Twinax
15m
Low
LRM
MMF
220-300m*
Medium
T
UTP
30-100m
Not applicable
*FDDI-grade MMF
L – 1310nm Laser
S – 850nm Laser
X – Uses 8B/10B encoding
R – Uses 64B/66B encoding
T – Unshielded Twisted Pair
C – Copper (Twinax), transmits over 4-lanes in each direction
4 (as in LX4) – represents information is transmitted over 4 wavelengths using a coarse
Wavelength Division Multiplexing
© 2012 Emulex Corporation
6
Upgrade Current Network or Greenfield Build
If upgrading current network
– Consider bandwidth requirement of servers
– Implement 10GbE uplink for 1Gb devices
– High priority devices attach directly to 10GbE
Greenfield Data Center 10Gb
– 10GbE to Top of Rack
– Edge / Core Switching at 10Gb
– 10GbE Convergence NIC/iSCSI/FCoE Throughout
© 2012 Emulex Corporation
7
10GbE Enterprise Class iSCSI/LAN –
Optimized Server Virtualization
LAN 1
LAN 2
iSCSI 1
iSCSI 2
Administration
Administration
vMotion
vMotion
LAN 3
iSCSI / LAN
LAN 4
iSCSI / LAN
1GbE LOM and Multiple 1Gb Adapters
© 2012 Emulex Corporation
10GbE LOM and 10Gb Dual-Port
Adapter
8
What’s New in vSphere
Networking with 10GbE
VMware Networking Improvements
vMotion
• Throughput improved significantly for single vMotion
–
–
–
–
ESX 3.5 – ~1.0Gbps
ESX 4.0 – ~2.6Gbps
ESX 4.1 – max 8 Gbps
ESX 5.0 – Multiple 8+ Gbps connections
• Elapsed reduced by 50%+ on 10GigE tests.
Tx Worldlet
• VM – VM throughput improved by 2X, to up to 19 Gbps
• VM – Native throughput improved by 10%
LRO (Large Receive Offload)
• Receive tests indicate 5-30% improvement in throughput
• 40 - 60% decrease in CPU cost
© 2012 Emulex Corporation
10
Jumbo MTU with 10GbE
Configure jumbo MTU



VM virtual adapter – change jumbo packet size value to 9k
ESX host – change vswitch MTU to 9k
NICs at both ends and all the intermediate hops/routers/switches must also support jumbo frames
Example: Configure 9k packet size on W2k8 VM virtual adapter
© 2012 Emulex Corporation
11
Jumbo MTU with 10GbE
Configure jumbo MTU
–
On ESX host, change vSwitch1 MTU to support jumbo frames up to 9000
Example: Configure 9k MTU to vSwitch1
© 2012 Emulex Corporation
12
Jumbo Frames even more important with
10GbE
Performance Improvement in iSCSI and NFS read/write
throughput using Jumbo Frames on 10GbE
Protocol
Read Throughput
Write Throughput
SWiSCSI
+11%
+39%
NFS
+9%
+32%
64KB Blocksize
© 2012 Emulex Corporation
13
NetQueues
What are NetQueues?
 Provides 8 queues on each 10G port for incoming network traffic
 Offloads incoming packet sorting/routing functions from hypervisor to the
adapter
 Frees up CPU resources
 Improves platform efficiency and overall system performance
 Traffic is balanced across multiple CPU cores for processing using MSI-x
 Message Signaled Interrupts (MSI-x) support
o Doubles the # of device interrupts generated
o Balances interrupts across all CPUs in a Symmetric Multiprocessing
(SMP) platform
 Optimized throughput between multiple virtual machines and a physical
network
 Best benefit with jumbo MTU on vSwitch, VNIC, physical switch
© 2012 Emulex Corporation
14
NetQueues
Without NetQueues Enabled – Only a single TX and RX queue
for processing all network traffic generated by multiple virtual
machines.
Enable NetQueues in ESX Host or use vSphere Client
Configuring NetQueues on ESX Host:
© 2012 Emulex Corporation
15
Performance Benefits Enabling NetQueues
and Jumbo MTU
•
•
•
Throughput is increased by 2.50 Gbps – ~ NIC Line Rate
Reduces average CPU utilization/used
35 - 50% reduction in Virtual Machine CPU utilization
1500 MTU, 8VMs no NetQueue Receive Thru = 7.36 Gbps
9000 MTU, 8VMs NetQueue enabled Receive Thru = 9. Gbps
Throughput Across VMs
© 2012 Emulex Corporation
16
Network Traffic Management with 10GbE
iSCSI
FT
VMotion
iSCSI
NFS
TCP/IP
FT
VMotion
NFS
TCP/IP
vSwitch
vSwitch
1GigE
10 GigE
Traffic Types
compete.
Who gets what share
of the vmnic?
Dedicated NICs for various traffic
types e.g. VMotion, IP Storage
Traffic typically converged over
two 10GbE NICs
Bandwidth assured by dedicated physical
NICs
Some traffic types & flows could dominate others
through oversubscription
© 2012 Emulex Corporation
17
NetIOC: Guaranteed Network Resources
NetIOC disabled
NFS, VM, and FT traffic
take a dip during
vMotion
Shares & Limits as Configured
NetIOC enabled
NFS, VM, and FT traffic
not affected by
concurrent vMotion
© 2012 Emulex Corporation
18
802.1p Tagging (QoS)
 802.1p is an IEEE standard for enabling Quality of Service at MAC level.
 802.1p tagging helps provide end-to-end Quality of Service when:
• All network switches in the environment treat traffic according to the tags
• Tags are added based on the priority of the application/workload
 You will now be able to tag any traffic flowing out of the vSphere
infrastructure.
© 2012 Emulex Corporation
19
VMware vMotion
Benefits of vMotion
Challenges
– Eliminates planned downtime
– Larger VMs require more time to
vMotion
– Enables dynamic load balancing
– Reduces power consumption
– Larger environments require more
vMotions to remain balanced
– Essential to managing the
virtualized datacenter
© 2012 Emulex Corporation
20
vSphere 5 vMotion – Multi-NIC support
70
vSphere 4.1
vSphere 5.0
60
25 to 30% Better
Time in seconds
50
50% Better
40
vSphere 5.0, out of box
configuration provides 25%
to 30% reduction in vMotion
Time
30
Using 2 NICs can provide
linear scaling and a 50%
reduction in vMotion time
20
10
Elapsed reduced by 50%+
on 10GbE tests
0
1 VM
2 VMs
© 2012 Emulex Corporation
21
VMware Fault Tolerance
Single identical VMs running in lockstep on
separate hosts
Zero downtime, zero data loss failover from
hardware failures
No complex clustering or specialized
hardware
Single common mechanism for all applications
and OS-es
10GbE Benefits
•
20% Better VM Performance
•
Easier to Manage Less NICs required
•
10GbE is Highly Recommended for FT
© 2012 Emulex Corporation
22
vSphere 5 – Networking Improvements
(SplitRXmode)
 Greatly reduce packet loss for Multicast processing
vSphere 5 introduces a new way of doing network packet receive processing
• Splitting the cost of receive packet processing to multiple contexts.
• Each VM we can specify whether we want to have receive packet processing in
the network queue context or a separate context.
Results when we had more than 24 VMs powered on
 Without splitRxMode up to 20% packet loss.
 Enabling splitRxMode less than 0.01% packet loss.
Enable SplitRxMode on a per VNIC basis
 Editing vmx file of VNIC with ethernetX.emuRxMode = "1" for the ethernet device.
Note: This is only available with vmxmet3.
© 2012 Emulex Corporation
23
Network Latency
VM round trip latency overhead 15-20 microseconds
DirectPath reduces round trip latency by 10 µs
How to reduce Network Latency
– Consider disabling power management
– Consider disabling physical & virtual NIC interrupt coalescing
– Reduce Contention on the physical NIC
– Utilize 10Gb NICS
– Utilize VMXNET3 Para virtualized device driver
– Utilize Directpath (if really needed)
http://www.vmware.com/files/pdf/techpaper/network-io-latency-perf-vsphere5.pdf
© 2012 Emulex Corporation
24
Networking & 10GbE Best Practices
Turn on Hyper-threading in BIOs
Confirm that the BIOS is set to enable all populated sockets for all cores
Enable “Turbo Mode” for processors that support it
Confirm that hardware-assisted virtualization features are enabled in the BIOS
Disable any other power-saving mode in the BIOS
Disable any unneeded devices from the BIOS, such as serial and USB ports
For Windows VMs use VMXNET3 Enhanced Virtual Adapters for best
performance
Adjust Network Heap Size for excessive network traffic
o By default ESX server network stack allocates 64MB of buffers to handle network data
o Increase buffer allocation from 64MB to 128MB memory to handle more network data
o To change Heap Size ESX Host: # excfg-advcfg –k 128 netPktHeapMaxSize
© 2012 Emulex Corporation
25
Networking & 10GbE Best Practices Cont’d
Be Mindful of Converged networks, storage load can effect network
–
Use NIOC to balance and control network workloads
Use Distributed switches for cross ESX host Network Convenience, no
significant performance impact for DvSwitch vs. vSwitch
–
DvSwitch Needed for NIOC and advance network shaping
Utilize the latest NIC Features
–
Jumbo Frames for iSCSI & NFS workloads
–
Utilize 10Gb Ethernet hardware
Utilize NIC Teams for fail over (HA) and NIC load balancing
–
Use Multiple NICs for improved vMotion Speeds
Keep an eye out for Packet Loss and Network Latency
© 2012 Emulex Corporation
26
Design Considerations
Design Considerations
Separate Infrastructure Traffic from VM Traffic
– VMs should not see infrastructure traffic (security violation)
Method of Traffic Separation
– 1. Separate logical networks (VLANs)
• Create one VDS, connect all pNICs
• Create portgroups with different VLANs, place vmknic and VM’s vNics on
different portgroups
• 2 pNics are sufficient
– 2. Separate physical networks
• Create one VDS for each physical network
• Create portgroups, put vmknic and VM’s vNics on portgroups from different
vswitches
• Requires at least 4 pNICs (2 per network for redundancy)
© 2012 Emulex Corporation
28
Design Considerations – Cont’d
Avoid Single point of Failure
– Connect two or more physical NICs to an Uplink Port group
– Preferably connect those physical NICs to separate physical switches
Understand your Virtual Infrastructure traffic flows
– Make use of NetFlow feature to monitor the traffic flows over time
– Use the data to come up with appropriate traffic shares to help NIOS
configuration
Prioritize traffic for important workloads and infrastructure
traffic
– Use QoS tagging
© 2012 Emulex Corporation
29
Design Considerations – Virtual Infrastructure
Traffic Types
© 2012 Emulex Corporation
30
Design Considerations – Traffic
Characteristics
/ NFS
© 2012 Emulex Corporation
31
Deployment Scenarios
Deploying 10GbE
Customer Infrastructure
– Needs
– Blade Server Deployment
• Two – 10Gb Interfaces
– Rack Server Deployment
• Two – 10Gb Interfaces
Physical Port Configurations
– Multiple 1Gb NICs
– Two 10Gb NICs
Physical Switch Capabilities
– Switch clustering
– Link State tracking
© 2012 Emulex Corporation
33
Rack Server Deployment – 10GbE Interface
© 2012 Emulex Corporation
34
Static- Port Group to NIC mapping
© 2012 Emulex Corporation
35
Dynamic – Use NIOC, Shares and Limits
Need Bandwidth information for different traffic types
– Consider using NetFlow
Bandwidth Assumption
–
–
–
–
–
Management – less than 1Gb
vMotion – 2Gb
iSCSI – 2Gb
FT – 1Gb
VM’s – 2Gb
Share Calculation
– Equal shares to vMotion, iSCSI and Virtual Machine
– Lower shares for Management and FT
© 2012 Emulex Corporation
36
Dynamic – Use NIOC, Shares and Limits
© 2012 Emulex Corporation
37
Blade Server Deployment – 10GbE Interface
© 2012 Emulex Corporation
38
Static – Port group to NIC mapping
© 2012 Emulex Corporation
39
Dynamic – Use NIOC, Shares and Limits
© 2012 Emulex Corporation
40
Pros and Cons
Static
Pros
• Deterministic traffic allocation
• Administrators have control over which
traffic flows through which uplinks
• Physical separation of traffic through
separate physical interfaces
Cons
• Underutilized I/O resources
• Higher CAPEX and OPEX
• Resiliency through Active-Standby Paths
© 2012 Emulex Corporation
41
Pros and Cons
Dynamic
Pros
• Better utilized I/O resource through traffic
management
• Logical separation of traffic through VLAN
• Traffic SLA maintained through NIOC shares
• Resiliency through Active-Active Paths
Cons
• Dynamic traffic movement across physical
infrastructure need all paths to be available to
handle any traffic characteristics.
• VLAN expertise
© 2012 Emulex Corporation
42
Emulex is HP’s Leading I/O Supplier
 Partnership Across HP’s ESSN Business Units

Broadest Offering Across Operating Systems and Form Factors
Enterprise Server, Storage, and Networking
Business
Critical
Systems
Industry
Standard
Systems
Storage
Division
Networking
ProLiant DL
Superdome2
10GbE uCNA
10GbE uCNA
10GbE NIC
4/8Gb FC
8Gb/10GbE Combo
ProLiant ML
P4000
10GbE uCNA
5820
P10000
ProLiant SL
Integrity Blade
10GbE uCNA
Tiger LOM
10GbE uCNA
10GbE NIC
8Gb FC
ProLiant
Bladesystems
rx2800
10GbE uCNA
10GbE NIC
LOM-Down (G7)
BLOM (Gen8)
10GbE uCNA
10GbE NIC, 8Gb FC
© 2012 Emulex Corporation
x9000
D2D
10GbE uCNA
16Gb FC
43
Resources
Emulex Implementers Lab: www.implementerslab.com
– Website containing technical whitepapers, application notes, videos and
technical blogs.
HP VMware Solutions www.hp.com/go/vmware
VMware Technical Resource Center:
http://www.vmware.com/resources/techresources/
www.hp.com/go/ProLiantGen8
© 2012 Emulex Corporation
44
Summary
Migrations from 1GbE to 10GbE deployments do require new
hardware but mostly all servers and top of rack switches being
deployed are now 10GbE
VMware Distributed Virtual Switch enables data center like
infrastructure
VMware ESXi 5.0 complemented by 10GbE adapters provided
by Emulex enable the tools and technologies required to
successfully deploy 10GbE networks
HP adapters provided by Emulex deliver all the necessary
technology to support VMware vSphere 5.0 10GbE network
deployments
© 2012 Emulex Corporation
45
Emulex Breakout Sessions
Wednesday, June 6th – 2:45pm
– The benefits and best practices of using 10Gb Ethernet with VMware vSphere 5.0 (session
#TB3258) Join Emulex and VMware for a technical discussion to help understand the effect of
transitioning from 1Gb to 10Gb Ethernet. It’s no longer about speed and feeds as it requires
knowledge of new network architectures and management tools in order to setup and monitor
bandwidth allocation and traffic prioritization. Storage and Network architects need to have an
understanding of new storage technologies, and networking features VMware brings with VMware
ESXi 5.0.
– Speaker: Alex Amaya (Emulex), and VMware
Thursday, June 7th – 11:15am
–
Converged I/O for HP ProLiant Gen8 (session #BB3259 – Thursday, June 7th 11:15am) Join this interactive
–
session with IT Brand Pulse to understand the benefits of HP converged networking, by exploring a
customer’s real-world deployment. HP has just unveiled its next generation ProLiant Gen8
platform that accelerates server market transformation – in addition to being self-sufficient, this new
platform is enabled with industry-leading I/O making them incredibly fast and flexible. The HP
ProLiant Gen8 platform delivers a converged I/O that includes FlexFabric, Flex-10, iSCSI and Fibre
Channel over Ethernet.....at the price of 10GbE.
Speaker, Frank Berry, CEO of IT Brand Pulse
Get a Starbucks Card! Enter to win a $100 Visa Gift Card!
Enter to win the 2012 Ducati Monster Motorcycle!
© 2012 Emulex Corporation
46
Emulex Booth – Demos, & Grand Prize
Management
OneCommand® Manager
Emulex OCM vCenter plug-in
8GFC HBAs – stand up and mezzanine
HP Converged Infrastructure – Path to the
Cloud
•FCoE
•iSCSI
•10GbE Ethernet
GRAND PRIZE
2012 Ducati Monster
Requirements for bike entry:
Listen to a booth demo
Participate in an Emulex breakout
session
Announce winner on 6/7 at 1:30 PM!!!!!
© 2012 Emulex Corporation
47
© 2012 Emulex Corporation
48