Transcript Lesson 3-A Net Improvement: Configuring Network Services and

Lesson 3-A
Net Improvement: Configuring Network Services and Protocols
by Rashid Khan
Overview
Understand basic TCP/IP concepts.
Configure TCP/IP.
Set up DHCP.
Set up DNS and WINS.
by Rashid Khan
Understand Basic TCP/IP Concepts
Transmission Control Protocol/Internet
Protocol (TCP/IP):
Is the most common protocol for handling
network communications on Microsoft networks.
Is also the preferred protocol for the Internet.
by Rashid Khan
Understand Basic TCP/IP Concepts
Addressing:
Computer networks require unique addresses
for each connected device.
The TCP/IP protocol suite implements IP
addresses that provide a unique identity to
devices on the network.
by Rashid Khan
Understand Basic TCP/IP Concepts
Unique IP addresses are necessary for
communication between network devices.
by Rashid Khan
Understand Basic TCP/IP Concepts
Addressing (continued):
Subnet masks.
Public IP addresses.
Private IP addresses.
by Rashid Khan
Subnet Masks
A subnet mask indicates the part of an IP
address that refers to the network and the
part of an IP address that refers to devices
(hosts) on the network.
Masking a smaller segment of the IP
address allows few networks with more
hosts.
Masking a larger segment of the IP
address allows more networks with few
hosts.
by Rashid Khan
Subnet Masks
Subnetting:
Custom subnet masks can be used to subdivide
a single range of IP addresses into two or more
smaller ranges.
Network administrators can decide to separate
segments of the network to enhance security,
ease management, and enhance performance.
by Rashid Khan
Public IP Addresses
 The Internet service provider (ISP) provides
Internet connectivity to organizations, and
handles the actual assigning of IP addresses.
 ISPs get their allocation of IP addresses from a
Local (LIR), National (NIR), or Regional Internet
Registry (RIR).
 IP addresses for public networks are distributed
using a system of three primary classes, known
as classes A, B, and C.
by Rashid Khan
Public IP Addresses
Address Ranges for Class-Based IP
Addresses
by Rashid Khan
Public IP Addresses
The Classless Inter-Domain Routing
(CIDR) is an addressing scheme for
allocating IP addresses.
It uses variable-length subnet masks,
which helps control the number of
addresses assigned to any particular
network.
by Rashid Khan
Private IP Addresses
The Internet Assigned Numbered Authority
(IANA) reserves special ranges of IP
addresses for use within private networks.
Such addresses are recognized as private
addresses by networking hardware and
software.
Such networks connect to other external
networks through routers that support
Network Address Translation (NAT).
by Rashid Khan
Configure TCP/IP
Dynamic and static IP addressing.
Changing connection properties.
by Rashid Khan
Private IP Addresses
Acceptable Ranges for Private IP Addresses
by Rashid Khan
Dynamic and Static IP Addressing
Dynamic IP addressing:
A Dynamic Host Configuration Protocol (DHCP)
server provides a dynamic IP address to each
device as it connects to the network.
A dynamic IP address can often change, each
time a connection to the network is established.
by Rashid Khan
Dynamic and Static IP Addressing
Static IP addressing:
A static IP address does not change.
Static addresses need to be set manually.
by Rashid Khan
Change Connection Properties
The Local Area Connection Properties dialog box
by Rashid Khan
Change Connection Properties
The Internet Protocol (TCP/IP) Properties dialog box
by Rashid Khan
Change Connection Properties
The Internet Protocol (TCP/IP)
Properties
by Rashid Khan
Change Connection Properties
Specifying an IP
by Rashid Khan
Address
Change Connection Properties
Specifying an IP
Address
by Rashid Khan
Set Up DHCP
DHCP benefits.
Configuring DHCP.
by Rashid Khan
DHCP Benefits
DHCP offers the following benefits:
Windows accepts an incorrect TCP/IP address
or a subnet mask entry, as long as the typed
format resembles an actual address or a subnet
mask.
DHCP ensures that each address is unique.
by Rashid Khan
Configuring DHCP
At least one server on the network must
be configured as a DHCP server.
DHCP sever is not installed with Windows
Server 2003.
DHCP manages IP addresses by issuing a
lease to client computers for a particular
address. The address is taken from a pool
of addresses called the scope.
by Rashid Khan
Configuring DHCP
The scope >> a range of IP addresses
that are valid for the network to which the
DHCP server is connected.
The lease issued to clients is valid for a
limited time for a particular IP address.
Prior to the expiration date, the client can
request for a renewal.
If the lease expires, clients have to request
for a new IP address from the DHCP
server.
by Rashid Khan
Configuring DHCP
The New Scope Wizard offers the
following settings to add a new DHCP
scope:
Name and description.
IP Address range and subnet mask.
Excluded IP addresses.
Lease duration.
Default gateway.
Domain Name System (DNS) and Windows Internet
Name Service (WINS) settings.
by Rashid Khan
Configuring DHCP
by Rashid Khan
Adding a Scope
Configuring DHCP
Specifying an byIPRashid
Address
Range
Khan
Configuring DHCP
Adding Exclusions
by Rashid Khan
Configuring DHCP
Configuring DHCP Options
by Rashid Khan
Configuring DHCP
Contents of the Scope
by Rashid Khan
Set Up DNS and WINS
DNS and WINS can translate Internet
domain names to IP addresses.
This translation process is called name
resolution.
by Rashid Khan
Set Up DNS and WINS
Difference between DNS and WINS.
Configuring DNS.
Client configuration.
by Rashid Khan
Set Up DNS and WINS
The Windows Components
Wizard
by Rashid Khan
Set Up DNS and WINS
Networking Services
by Rashid Khan
Set Up DNS and WINS
Completing the Windows
Component Wizard
by Rashid Khan
Difference between DNS and WINS
DNS:
DNS should be installed on most Windows
Server 2003 networks.
DNS resolves the IP host name to the IP
address.
However, operating systems such as Windows
NT and Windows 98 communicate over
networks using NetBIOS names.
Network Basic Input/Output System (NetBIOS)
names need the services of WINS to be
resolved into IP addresses.
by Rashid Khan
Configure DNS
Lookup zones
Zone name
by Rashid Khan
Lookup Zones
 A forward lookup zone sends name resolution
requests for names outside a domain to an
external DNS server.
 The internal DNS server handles all requests for
internal name resolution.
 The DNS server processes each name
resolution request and determines whether or
not it can resolve the name.
 If the DNS server cannot resolve the name, it
queries known external DNS servers.
by Rashid Khan
Zone Name
A zone name:
Identifies the domain or portion of a domain for
which a DNS server is responsible.
Is used by the DNS server to determine which
name requests are internal and which are not.
by Rashid Khan
Client Configuration
Clients connected to the network must be
properly configured to work with DHCP.
On Windows XP and Windows 2000, the
TCP/IP settings can be configured to
obtain the IP address and the DNS server
address automatically.
On older operating systems, the WINS
server needs to be configured to use
DHCP for WINS resolution.
by Rashid Khan
Client Configuration
Configuring a DNS Server
by Rashid Khan
Client Configuration
Selecting a
Configuration Action
by Rashid Khan
Client Configuration
Selecting a Primary
Server Location
by Rashid Khan
Client Configuration
Specifying a Zone Name
by Rashid Khan
Client Configuration
Setting Dynamic Updates
by Rashid Khan
Client Configuration
Forwarders
by Rashid Khan
Client Configuration
The DNS Tab in the Advanced
TCP/IP Settings
by Rashid Khan
Client Configuration
Rashid Khan
Configuringby Scope
Options
Summary
 The TCP/IP protocol suite is the preferred
protocol for networks and the Internet.
 It distinguishes each device on a network by
implementing IP addresses.
 TCP/IP can be configured statically or
dynamically.
 DHCP servers can reuse IP addresses that are
not currently in use.
 DNS and WINS can resolve Internet domain
names to IP addresses.
by Rashid Khan