Transcript SLO 2016
Jan Tomáštík Joint Laboratory of Optics of Palacky University and Institute of Physics of the Academy of Sciences of the Czech Republic Optical microscope Confocal microscope Telescope (one particular) SLO 2016 A complex optical instrument that increases the viewing angle of the eye, and thus improves its resolution. Multiple optical systems: Ocular and objective Objective – system of lens, that is near to the observed object. Object is placed close the objective focal plane and objective creates its real, inverted and magnified image (placed between ocular an its focal point. Objective magnification ranges from x5 to x100 Ocular – behaves as a loupe that further magnifies the image from objective. Unreal, inverted and magnified image is created. Ocular magnification ranges from x5 to x20. Overall magnification is calculated by multiplying both individual magnifications. Typical maximum of optical microscope is up to x1000. Depth of field – Area of focus defined in the z-axis (depth). It decreases with increasing magnification. Out-of-focus areas are part of image. SLO 2016 First Nikon microscope (around year 1900) Objective quality is crucial. Its basic parameters are: NA (numerical aperture) – describes the acceptance cone (its lightgathering ability). Refractive index and acceptance cone NA n sin Resolution - depends on NA and d min 0.61 NA 4 Transmission and refleflective microscope – different samples need different types of ilumination First Nikon microscope (around year 1900) SLO 2016 BRIGHTFIELD PHASE CONTRAST Uses oblique illumination. Objective catches only light which direction was altered by sample Contrast of contours and small structural details POLARIZED LIGHT SLO 2016 Uses special 3 zone mask for oblique illumination to enhance contrast of optical phase gradient. „poor man´s DIC“ DARK FIELD Using of Wollaston prisms and crossed polarizators allows interference of points on sample that are closer than dmin. exaggerate small gradients differences in optical path (thickness, refractive index). HOFFMAN MODULATION Translate phase shifts of light into intensity change. Interference of undifracted (iluminating) and difracted (through sample) light. Ideal for unstead samples (like cells on glass). DIFFERENCIAL INTERFERENCE CONTRAST (NOMARSKI) Oldest technique: direct lightning; Contrast relies on differences in light absorption, n, or color . Using of cross-polarization elements to strongly enhance birefringent materials Marvin Minsky, 1957 Common use of LCSM – late 80s Principle: A narrow laser beam passes through aperture and highNA objective on sample. Laser is focused nearly to point with diameter of diffraction limit Reflected light then returns through the objective to detector. Detector (CCD) Pinhole Objective Sample SLO 2016 Laser Light is filtered using pinhole so only the light from the focus plane passes Detector (CCD) Pinhole only SHARP IMAGE or DARK Image is not created at once but point by point Laser beam is swept by mirrors Optical slice in the x-y plane Precisely defined displacement in z-axis ◦ 3D reconstruction images created by composition of images SLO 2016 Objective Sample Laser Advantages: Higher resolution than optical microscope Higher magnification Depth of field? - Arbitrary – only focused part are shown…. but in whole user selected range 3D reconstruction of surface precise and accurate measurement SLO 2016 LEXT is laser scanning confocal microscope from Olympus. Resonance sensor with galvanic mirror fast and accurate image rendering in wide area. Maximum magnification 120x - 2400x or 14400x with „optical zoom“ Laser source – confocal mode Halogen lamp – classic microsopy (brightfield) POSSIBILITY TO MAKE COMBINED IMAGING 2D and 3D acurate surface reconstruction in real color SLO 2016 2D - intensity or height image 3D – intensity, height texture, wire model, contour b-w image, pseudocolors, true colors SLO 2016 Distance/Area Measurement - two point distance, dX, dY, dZ - size of the area Step measurement SLO 2016 Scratch test SLO 2016 Change of topic dimension SLO 2016 Reflector and refractor objective with long focal distance and ocular/eyepiece with short one For imaging of far objects under larger viewing angle, and gather more light from the object than the naked eye f obj / f oc SLO 2016 The largest cosmic ray observatory in the world Hybrid cosmic-rays detector Particle energies more than tens EeV Fluorescence detectors - 7 buildings, with 27 optical telescopes in total Cherenkov detectors - 1600 barrels with 12 tons of pure water and three photomultipliers, in the 1.5 km grid Malargüe, Province Mendoza, ARGENTINA SLO 2016 3 000 km2 The incident ultra energetic particle induce the cascade of secondary particles ◦ Barrels catch the secondary particles that survive and hit the ground ◦ Fluorescence flash from the secondary particles flyby through the atmosphere is displayed FD mirrors on the photodetector array SLO 2016 The incident ultra energetic particle induce the cascade of secondary particles ◦ Barrels catch the secondary particles that survive and hit the ground ◦ Fluorescence flash from the secondary particles flyby through the atmosphere is displayed FD mirrors on the photodetector array SLO 2016 Fluorescence telescope - Mirror radius of curvature R = 3400 mm - The curvature of PMT camera Rc = 1742 mm - Field of wiev= 30° x 30° SLO 2016 Fluorescence telescope ( model + realization) Product of Joint laboratory of optics in Olomouc SLO 2016 • Glass: PIREX • Thickness: 15 mm • Radius of curvature: 3406±6 mm • Reflective layer: Aluminium + protective layer SiO2 FAST Fluorescence detector Array of Singlepixel Telescopes SLO 2016 Mirror segment from Pierre Auger and Cherenkov Telescope array, as well as any other optical coatings must have good mechanical properties ◦ Resistance against wear ◦ Good adhesion to substrate ◦ Strong cohesive forces in coating itself Surface coating Interlayer SLO 2016 substrate This type of testing we are capable to perform in JLoO using NANOINDENTATION and NANOSCRATCH TEST, which are among other evaluated by our laser scanning confocal microscope. Method and samples will be shown on the excursion in laboratories. Thank you for your attention SLO 2016