Transcript All-About-the-NuCanoe-Product-Overview

All About the NuCanoe
What is NuCanoe?
The NuCanoe is a boat that gives people a
greater ability to pursue activities on the
water.
What is NuCanoe?
Enhance Your Ability
To Fish
To Dive
To Recreate
To Hunt
To Paddle
To Row
NuCanoe Models
• NuCanoe 10’
• NuCanoe 12’
Standard Configuration
Deck Rings (10’-15 / 12’-17)
Bow Plug
2 Molded Bench Seats
4 Carry Handles
NuCanoe Color Options
Red
Yellow
Desert
Sand
OD
Green
Hunter
Brown
Green
Camo
Brown
Camo
Design Features
Sealed Hull design provides high internal
floatation and allows the NuCanoe to float even
if capsized or full of water. The only access to
the interior of the NuCanoe is at the bow and is
sealed by a bow plug.
Kiss-offs on the deck floor
join the deck to the hull to
provide strength and rigidity.
¼-20 Threaded Inserts are molded into the
hull. Seats, hardware, and accessories are
secured via screws into these inserts. They are
completely enclosed and sealed in hull.
Square Transom houses
a trolling motor. Up to
2HP or equivalent motor.
Design Features
Battery Box Storage fits a type-24
Battery Box and provides strap-down
points
Upright & Modular Seats
provide upright and dry seating,
and enable single, tandem, or
triple use.
Stern Hole strengths transom for
use with a motor, provides a pass
through for anchor rope, and
enables the NuCanoe to be secured.
Design Features
Mild Rocker enables responsive handling
and improves maneuverability.
Design Features
Wide V-shaped Hull decreases the beam
of the NuCanoe at the water line to around
32-36” to decrease drag and increase hull
speed and maneuverability.
Dual Channels run the length of the
hull to enhance the tracking and
handling of the NuCanoe.
Triangular Skeg at the stern end of
the hull protrudes into undisturbed
water to greatly improve tracking and
lateral stability in the water.
Hard Chine on both sides of the
NuCanoe provides significant
secondary stability.
Seating Options – 12’
Solo
Tandem
Tandem XL
Tandem
Center
Facing
Triple
Triple
Center
Facing
Seating Options – 10’
Solo
Tandem
Tandem
Center Facing
Accessories & Rigging
• Accessories
– Install or remove in minutes
– Can be positioned in multiple locations
– Fit both NuCanoe models
• Rigging Kits
– Install via pop rivets
– Hardware is permanent and can not be removed
Specs &Technical Info
NuCanoe 10
NuCanoe 12
10'
Length
12'
42"
Beam (Width)
42"
32-36"
Beam @ Waterline
32-36"
13-16"
Height
12-16"
4-6"
Draft
4-6"
59 lbs
Hull Weight
77 lbs
1-2 ppl
Seating Capacity
1-3 ppl
450 lbs
Weight Capacity
525 lbs
Specs & Technical Data
• Manufacturing Process
– The NuCanoe is a rotationally molded product.
• Material
– The NuCanoe hull material is a high-density polyethylene
compound designed for applications like kayaks or boats that
require a balance very high stiffness and extreme toughness.
Key features of this material are:
•
•
•
•
Excellent long term outdoor weatherability (UV8);
Superior balance of toughness and rigidity;
Very High Stiffness;
Excellent low temperature impact.
Warranty
• The NuCanoe is covered by a 3 year warranty against
defects from workmanship and materials.
• In the event of defect, malfunction, or other failure of the
product not caused by any misuse, modification, or
damage to the product while in possession of the original
purchaser, we will remedy the failure or defect, without
charge to the consumer, within a reasonable period of
time.
• The remedy will consist of repair or replacement of the
product, at NuCanoe, Inc.’s option.
www.nucanoe.com