Transcript Proper Care and Feeding of your MDB

Proper Care and Feeding of
your MDB
- Recommendations for General MDB Maintenance
- Read the notes on the foils!
- Last Updated 12/10/2005
Overview
- Well thought-out MDB installation is only the beginning
- Regular Maintenance Tasks
- Optimization and Tuning Tips
- Relocating Files
- Troubleshooting
- Backup/Recovery recommendations
- List of Useful Commands
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Before You Begin
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Things you should do
- Install Ingres on a disk with enough room available (a
minimum of 100GB free space) – if possible, create Ingres
Transaction Log(s) on separate disk(s)
- Checkpoint, journal, and dump MUST be on a separate
disk
- Maintain the MDB often – optimizedb and ckpdb
- Manage System Tables
- Plan for MDB Backup/Recovery
- Use appropriate MDB Settings – MEDIUM and LARGE
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Logging Considerations
- Ingres allows both the primary and dual transaction log
(optional) files to exist on multiple devices (up to 16).
Ingres improves logging system performance by allowing
it to write to multiple disk devices.
- When configuring multiple log partitions, keep the
following in mind:
- All log partitions must be the same size
- The primary and dual transaction logs must use the
same number of partitions.
- Minimum recommended transaction log size is 3GB.
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Logging Considerations
- The Ingres log is a primary limiting factor for scalability
- Log tuning is the first place to go if you cannot change a
slow update query
- Logs MUST be on safe DASD (protected by RAID)
- If you lose the log you cannot recover the database
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Supplied MDB Settings - Medium
- Default MDB settings
- Supports Windows XP Pro – 4GB Virtual Memory required
- Greatly improves Ingres performance by tuning key parameters
dbms.*.connect_limit 500
dbms.*.qef_hash_mem 49152000
dbms.*.qef_sort_mem 8192000
dbms.*.qef_sorthash_memory 675840000
dbms.private.*.p8k.dmf_cache_size 15000
dbms.private.*.p8k.dmf_group_count 4500
dbms.private.*.p16k.dmf_cache_size 3000
dbms.private.*.p16k.dmf_group_count 0
dbms.private.*.p32k.dmf_cache_size 2500
dbms.private.*.p32k.dmf_group_count 0
dbms.*.log_writer 10
dbms.*.max_tuple_length 0
dbms.*.default_page_size 8192
dbms.*.active_limit 256
dbms.*.system_readlock shared
gcc.*.inbound_limit 500
gcc.*.outbound_limit 500
rcp.log.archiver_interval 1
ingstart.*.rmcmd 1
gcn.session_limit 64
rcp.lock.list_limit 2048
rcp.lock.per_tx_limit 3000
rcp.log.database_limit 10
rcp.log.tx_limit 100
rcp.dmf_cache_size8k 200
dbms.*.qef_qep_mem 25600
dbms.*.rep_qman_threads 0
dbms.*.system_maxlocks 500
dbms.*.opf_memory 36700160
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Supplied MDB Settings - Large
- setupmdb -II_MDB_SIZE=LARGE
- Takes full advantage of Server class hardware:
dbms.*.connect_limit 1000
rcp.lock.per_tx_limit 3000
dbms.*.qef_hash_mem 65536000
dbms.*.qef_sort_mem 8192000
dbms.*.qef_sorthash_memory 768000000
dbms.private.*.dmf_cache_size 15000
dbms.private.*.dmf_group_count 1500
dbms.private.*.dmf_memory 55296000
dbms.private.*.p16k.dmf_cache_size 5500
dbms.private.*.p16k.dmf_group_count 0
dbms.private.*.p16k.dmf_memory 90112000
dbms.private.*.p32k.dmf_cache_size 5500
dbms.private.*.p32k.dmf_group_count 0
dbms.private.*.p32k.dmf_memory 180224000
dbms.private.*.p4k.dmf_cache_size 15000
dbms.private.*.p4k.dmf_group_count 1000
dbms.private.*.p4k.dmf_memory 94208000
dbms.private.*.p8k.dmf_cache_size 25000
dbms.private.*.p8k.dmf_group_count 5500
dbms.private.*.p8k.dmf_memory 565248000
dbms.*.log_writer 10
dbms.*.max_tuple_length 0
dbms.*.default_page_size 8192
dbms.*.active_limit 1000
dbms.*.opf_memory 36700160
gcc.*.inbound_limit 500
gcc.*.outbound_limit 500
rcp.log.archiver_interval 1
ingstart.*.rmcmd 1
gcn.session_limit 64
rcp.lock.list_limit 2048
rcp.log.database_limit 10
rcp.log.tx_limit 100
rcp.dmf_cache_size8k 200
dbms.*.qef_qep_mem 25600
dbms.*.rep_qman_threads 0
dbms.*.system_maxlocks 500
dbms.*.system_readlock shared
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
MDB Configuration
- Supplied configurations have many tradeoffs – they were
designed to support all products as we do not know which
products are to be installed
- One can do custom product specific configs with much
better single product performance
- NSM is the only product needing huge numbers of
connections and a high locks per transaction value
- You can reclaim much of the virtual storage when NSM
not present – this can be used for other purposes
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Suggested Regular
Maintenance
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Maintenance and Performance Tuning
- MDB must be regularly maintained to produce good
performance
- Rebuild indexes, regenerate stats to reflect reality –
usermod,optimizedb,ckpdb commands.
- If you suddenly experience a performance issue or run out
of disk space – think DB Maintenance!
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Optimizedb - daily
- Can be run while db is active
- Should be run whenever table is rebuilt or has major
changes. Recommended – daily!
- Syntax: optimizedb -zk -zw -umdbadmin mdb
- If you add a lot of data, then run optimizedb before doing
extensive queries – so, think about optimizedb after
UAPM reconciliation or a large uDSM replication finishes
or after a large NSM discovery (can make 3 orders of
magnitude impact on performance)
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Checkpoint - daily
- Takes place online (while DB is in use) and is transparent to users
- ckpdb command creates new checkpoint sequence, then copies log
records of any DB changes that occurred during checkpoint procedure to
dump file.
- Permission required: System administrator, DBA, or an Ingres user with
operator privilege.
- Syntax: ckpdb -umdbadmin mdb
- IMPORTANT: Free disk space must be monitored closely!
Checkpoint and journal files will build up on the disk. However,
always keep previous versions of checkpoint, dump, and journal
files on tape! We will discuss that in greater detail later –
Backup/Recovery Recommendations.
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
usermod
- Usermod modifies the user defined tables only to their currently
defined storage structure
- Recreates any secondary indexes that are currently defined
- Fixes overflow pages in a table – improves query processing
performance
- should be used on a regular (daily suggested) basis when:
- Tables are in overflow
- Need to reclaim space
- Before optimizedb/sysmod
- Can be run online where access to table is mostly permitted except at
end when usermod takes exclusive access to table.
- Syntax: usermod -umdbadmin -online mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
usermod
- Whether or not usermod is of value depends upon the
product(s) in the MDB and the types of transactions run
since the last usermod
- Lots of adds or deletes is often a sign that usermod may
be of value
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Monitor DB Location Size
- For 32-bit OS (W2K, RedHat ES 3.0), need to monitor
size of files in the DB location. If > 2 GB need to :
- Relocate table(file) from one location to another. E.g.,
modify employee to relocate
With oldlocation = (loc1,loc2,loc3)
newlocation = (loc4, loc5, loc6)
- Reorganize table(file) across multiple locations. E.g.,
modify employee to reorganize
with location = (loc1, loc2, loc3)
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
sysmod
- sysmod reorganizes the system catalogs for DB to
predetermined storage structures
- If you create the MDB and have no (or limited) data in it
and then use it or bulk load data -> run sysmod
- If spread of data changes - > run sysmod
- Sysmod requires exclusive access to the DB – and is not
for regular live/online maintenance
- Syntax: sysmod mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
sysmod
- You need a current backup (or two!) before running
sysmod
- The total time cost can be very high
- Should not be done except on a carefully scheduled basis
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Optimization and Tuning
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Statistics
- Affect speed of query processing
- Generating statistics for DB means effectively optimizing
the DB
- Run periodically on keys or index columns
- Complete and accurate statistics result in greater and
more effective query execution strategies
- Inaccurate statistics can lead to wrong query execution
plans to be chosen by optimizer and, therefore, to
dramatic performance reduction
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Statistics
- Requires disk space because temporary tables are being
created
- Need to run this when significant change in column’s
value
- Stored in system catalogs (iistats and iihistograms)
- Used by query optimizer to select an efficient query
processing strategy
- Syntax: optimizedb <options> dbname/tablenames(s)
- Example 1: optimizedb -zv mdb -remp
- Example 2: optimizedb -zk mdb -remp -rdept
-aempno
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
System Catalogs
- Also require maintenance as they are tables themselves
and subject to data changes
- sysmod will run the appropriate modify commands against
the catalogs
- sysmod takes an exclusive mode against the DB
- Can be done on DB as well as individual tables
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
System Catalogs
- symod requires exclusive access to DB (must be run
while DB is “quiet”)
- Can make this command wait till DB becomes free
- Run whenever system catalogs are changes
- Syntax: sysmod dbname/tablename(s)
- Example 1: sysmod empdata
- Example 2: sysmod -w empdata iirelation
iiattribute
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Tuning Recommendations
- Ingres uses a Cost Based Query Optimizer to develop query
execution plans – QEPs.
- Optimizing the DB affects speed of query processing.
More complete and accurate statistics -> more efficient query execution
strategies - > faster system performance.
- Without statistics, Query Optimizer can only guess what the data
looks like, and “assumptions” are usually not valid for application SQL
queries.
- In VDBA, use Optimize Database dialog to generate database
statistics for DB that is currently selected in Database Object Manager
window.
- At the command line, use optimizedb command:
- Syntax: optimizedb -zk -zw -umdbadmin mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Frequency
- How often should the MDB be optimized?
- The simple answer is: often! Daily.
- During roll-out it is expected that tables are getting
populated.
- Tables will keep growing – although values in some
columns will change very little, others will change
significantly.
- optimizedb can be executed via shell scripts, batch files,
etc.
- Optimizing a database generally requires disk space,
because temporary tables are created
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Modify System Storage Tables
- sysmod command modifies system tables (catalogs) of a
database to predetermined storage structures.
- sysmod should be run after optimizing the MDB.
- System tables are modified to the most appropriate
storage structure for accelerating query processing.
- sysmod operation requires exclusive access to DB as well
as DBA or system administrator privileges.
- Syntax: symod mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocate Database Files
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Types of Files in an Ingres Database
- Data – User tables, indexes, and system catalogs
- Checkpoint – Static copy of the entire database
- Journal – Dynamic records of changes made to the
journaled tables after the last checkpoint. Take regular
checkpoints to minimize recovery time and avoid wasting
disk space with journal files
- Dump – Records of changes to the database that
occurred during the dump process. Used to recover
databases checkpointed online
- Work – Used for system work, such as sorting and
creating temporary tables
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Why Relocate?
- If data, work, checkpoint, dump and journal files are all
currently located on the same disk, relocating them to
separate disks will:
- Improve fault tolerance and aid recovery from hardware
failure (i.e., disk with data files).
- Potentially improve performance
- Gain disk space
- HIGHLY RECOMMENDED!
- IMPORTANT! Checkpoint, journal, and dump files can
use only one location each.
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Default Locations
- Default Ingres locations are:
- ii_checkpoint (checkpoint)
- ii_database (data)
- ii_dump (dump)
- ii_journal (journal)
- ii_work (work)
- They are all set to the following:
- Windows: C:\Program Files\CA\Ingres [EI]
- UNIX\Linux: /opt/CA/IngresEI
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Change Defaults - Windows
- To change default locations under Windows edit the
following entries in the sample.rsp file:
- iidatabasedir="C:\INGRESNEWAREA"
- iicheckpointdir="D:\INGRESAREA"
- iijournaldir="D:\INGRESAREA"
- iidumpdir="D:\INGRESAREA"
- iiworkdir="C:\INGRESNEWAREA
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Change Defaults – UNIX/Linux
- Under Linux/Unix, first create a response file and include
the following entries in it:
-
II_DATABASE=<Directory>
II_CHECKPOINT=<Directory>
II_JOURNAL=<Directory>
II_DUMP=<Directory>
II_WORK=<Directory>
- The directory must exist prior to installing Ingres! Mask:
700. The directory structure must be owned by the user
that owns the installation. ingres by default.
- Export II_RESPONSE_FILE. Example:
- export II_RESPONSE_FILE=/ingres/install.rsp
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Guidelines for Locations
- Locations must exist prior to relocation operations
- Locations must be specified with appropriate usage type: Journal,
Checkpoint, Dump, Data, Work
- Existing files are moved to new locations. New files are created there.
- Location areas are created using host OS facilities
- Each area must have a specific subdirectory structure that parallels that of
the corresponding default location:
- MD C:\INGRESNEWAREA
- MD C:\INGRESNEWAREA\INGRES
- MD C:\INGRESNEWAREA\INGRES\DATA (or CKP, JNL, DMP, WORK)
- MD C:\INGRESNEWAREA\INGRES\DATA\DEFAULT
- New areas are then used in the Create Location dialog (VDBA) or in create
location, alter location, drop location SQL statements.
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Create Location Dialog
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Create Location Statement
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocating Database Files - Checkpoint
- Once new locations are created, use the relocatedb
command to relocate DB files. For example:
- relocatedb mdb -new_ckp_location=newlocation_checkpoint
- This command does the following:
- Performs an update to the iidbdb
- Updates checkpoint location in the configuration file.
- Copies checkpoint files from old checkpoint location
(ii_checkpoint) to new checkpoint location
(newlocation_checkpoint)
- Deletes checkpoint files from old checkpoint location
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocating Database Files - Journal
Example:
- relocatedb mdb -new_jnl_location=newlocation_journal
- This command does the following:
- Performs an update to the iidbdb
- Updates journal location in the configuration file
- Copies journal files from old journal location (ii_journal)
to new journal location (newlocation_journal)
- Deletes journal files from old journal location
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocating Database Files - Dump
Example:
- relocatedb mdb -new_dump_location=newlocation_dump
- This command does the following:
- Performs an update to the iidbdb
- Updates dump location in the configuration file
- Copies dump files from old dump location (ii_dump) to
new dump location (newlocation_dump)
- Deletes dump files from old dump location
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocating Database Files - Work
- Before relocating work files, we must extend the database to the new
work location. For example:
- extenddb -lnewlocation_work mdb -Uwork
- Once that’s done, tell Ingres that the new work location is the default
for the database. For example:
- relocatedb mdb -new_work_location=newlocation_work
- Next, use the unextenddb command to unextend a database
location. In this case, we will unextend the location that used to be
the default - ii_work. For example:
- unextenddb -lii_work mdb -Uwork
- IMPORTANT: After unextending a database location, you should
checkpoint the database. Previous checkpoints cannot be used
because they reference a location that is no longer accessible to
the database!
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Relocating Database Files - Data
Relocating data files is possible but not recommended!
- Best approach - > plan ahead so that relocating data files is never needed!
- If you must relocate data files, first use the relocateddb command to copy the entire MDB. For
example:
- relocatedb mdb -new_database=newmdb
-location=ii_database -new_location=newlocation_data
- This command not only copies the entire MDB Database, but will also relocate data files. The
default data location for newmdb will be newlocation_data
- Checkpoint, dump, journal, and work locations were already relocated. So, the default locations for
newmdb are: newlocation_checkpoint, newlocation_dump, newlocation_journal, newlocation_work,
newlocation_data
- Now that all Database files are relocated, destroy the original MDB. For example:
- destroydb -umdbadmin mdb
- Finally, copy newmdb back to mdb, and then destroy it:
- relocatedb newmdb -newdatabase=mdb
- Destroydb -umdbadmin newmdb
- IMPORTANT: Checkpoint the relocated MDB immediately as there are no checkpoints at this
point!
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Troubleshooting
Recommendations
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Troubleshooting
- Problems encountered can be with “host” product (e.g.,
Unicenter NSM) or Ingres as an installation or the MDB
- Need to determine if a problem lies within the MDB or the
product that installed the MDB
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
First Steps
- Identify release and gen level information for MDB
isql mdb – umdbadmin
- Is Ingres up and running?
- On UNIX check processes in Task Manager or use ps –
fuingres
- On Windows, verify Visual Manager icon is fully green.
If not, double click on it to see which processes are red
- If extra or missing processes, stop and restart Ingres
- Is MDB accessible?
- Execute sql mdb -umdbadmin
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Database Information
- Use infodb command to gather high level information on
the db, including:
- Status of db
- Location of files
- History of checkpoints and journals
- Must be DBA or system admin to run this command
- Syntax: infodb mdb <#checkpoint>
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Check MDB Error Log Files
- errlog.log – default log for most programs
- iiacp.log – archive error log
- iircp.log – recovery error log
- errvdba.log – VDBA error log
- ingstart.log – Ingres startup log
- Install_mdb.log – information about MDB creation
processing
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Backup/Recovery
Recommendations
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
When to backup
- Good: Run at end of a housekeeping cycle
- Better: Run prior to and after housekeeping (provides a
recover point in the event housekeeping fails)
- Best: Run before and after housekeeping and at suitable
points in between. This allows minimum time for recovery
based on size of checkpoint and journal files!
- Caution – checkpoint requires space similar to the full MDB
- Every checkpoint that is spinning needs the full space
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Backup and Recovery Options
- Checkpointing and journaling to backup a DB or selected
tables (recommended approach!)
- Unloading DB
- Copying DB to backup particular tables or all objects you
own in DB
- Operating system backups to replace current or destroyed
tables in DB
- Roll forward of DB to recover a DB or selected tables from
checkpoints and journals
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Checkpoint
- Takes place online (while DB is in use) and is transparent to users
- ckpdb command creates new checkpoint, then copies log records of
any DB changes that occurred during checkpoint procedure to dump
file.
- Permission required: System administrator, DBA, or an Ingres user
with operator privilege.
- Syntax: ckpdb -umdbadmin mdb
- IMPORTANT: In order to prevent checkpoint and journal files
from using too much disk space, we recommend that
checkpoint, journal, and dump files from previous checkpoint
sequences are moved to tape!
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Checkpoint
- How do I find out what checkpoint, journal, and dump files need to
remain on disk in order to recover from the current checkpoint sequence?
- Run infodb mdb and search for the following data (bold red):
----Journal information--------------------------------------------------------Checkpoint sequence :
8
Journal sequence :
1671
----Dump information-----------------------------------------------------------Checkpoint sequence :
8
Dump sequence :
7
----Checkpoint History for Journal---------------------------------------------Date
Ckp_sequence First_jnl
Last_jnl valid mode
---------------------------------------------------------------------------Wed Oct 19 14:07:15 2005
7
1342
1342
1 ONLINE
Wed Oct 19 14:31:28 2005
8
1343
1671
1 ONLINE
----Checkpoint History for Dump------------------------------------------------Date
Ckp_sequence First_dmp
Last_dmp valid mode
---------------------------------------------------------------------------Wed Oct 19 14:07:15 2005
7
6
6
1 ONLINE
Wed Oct 19 14:31:28 2005
8
7
7
1 ONLINE
----Extent directory-----------------------------------------------------------Location
Flags
Physical_path
-----------------------------------------------------------------ii_journal
JOURNAL
C:\Program Files\CA\Ingres
[EI]\ingres\jnl\default\mdb
ii_checkpoint
CHECKPOINT
C:\Program Files\CA\Ingres
[EI]\ingres\ckp\default\mdb
ii_dump
DUMP
C:\Program Files\CA\Ingres
[EI]\ingres\dmp\default\mdb
================================================================================
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Unloading a Database - unloaddb
- Must be run offline only
- Creates static backup copy
- Creates scripts for unloading/reloading DB in binary mode
(unloaddb DBName) or in ASCII mode (unloaddb –c DBName)
- After, you must run one of the created scripts (unload.ing on UNIX
or unload.bat on Windows) which visits every single table in DB
and copies the content to a file – should run offline to ensure table
enterires are consistent in terms of referencial integrities
- Once done, use system tools to copy file to tape (or whatever) w/o
need to stop Ingres installation.
- In case of recovery – you would loose all transactions after the
snapshot.
- Checkpoint is preferred option
- Syntax: unloaddb mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Copying a Database
- copydb mdb -umdbadmin
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Backup Recommendations
- Keep last checkpoint and associated journals and dmp
files on disk
- Take copy of checkpoint files, dmp directory for DB and
journal files to tape (or disk)
- Allow # of checkpoints in the aaaaaaaa.cnf file to grow to
the maximum number and then for DB to drop the oldest
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Recovery
- rollforwarddb recovers DB from last checkpoint and current journal
and dump files
- If target checkpoint was performed online (while DB was in use), then
rollforwarddb does the following:
- 1. Restores DB from checkpoint location to DB location
- 2. Applies log records in dump location to DB (which returns DB to
its state when checkpoint began)
- 3. Applies journal records to DB
- If target checkpoint was executed offline, then step #2 is omitted.
- Permission required: DBA or a system administrator.
- Syntax: rollforwarddb –umdbadmin mdb
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Reference List/Cheat Sheet
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Command Cheat Sheet
- usermod –online –umdbadmin mdb
- ckpdb –umdbadmin mdb
- optimizedb –zk –zw –umdbadmiin
- help mdb
- Isql mdb -umdbadmin
- rollforwarddb –umdbadmin mdb
- sysmod mdb
- unloaddb
- infodb
- For more info, consult Command Reference Guide from MDB installation.
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.
Questions?
© 2005 Computer Associates International, Inc. (CA). All trademarks, trade names, services marks and logos referenced herein belong to their respective companies.